-
Estimating angular momenta of fission fragments from isomeric yield ratios
Authors:
Zhihao Gao,
Andreas Solders,
Ali Al-Adili,
Simone Cannarozzo,
Mattias Lantz,
Stephan Pomp
Abstract:
Purpose: To deduce the angular momenta of fission fragments based on the observed isomeric yield ratios (IYR) in 25-MeV proton-induced fission of 238U and to compare these using Wilson's model. Method: A surrogate model of GEF has been developed to generate properties of primary fission fragments. Based on the excitation energy and angular momentum of fission fragments from GEF, an energy versus a…
▽ More
Purpose: To deduce the angular momenta of fission fragments based on the observed isomeric yield ratios (IYR) in 25-MeV proton-induced fission of 238U and to compare these using Wilson's model. Method: A surrogate model of GEF has been developed to generate properties of primary fission fragments. Based on the excitation energy and angular momentum of fission fragments from GEF, an energy versus angular momentum matrix is reconstructed using a set of parameters. With such matrices as input, TALYS is used to calculate the de-excitation of the fission fragments, from which the IYRs are obtained. By varying one of the parameters, the root-mean-square angular momentum (Jrms), which determines the angular momentum distribution of the matrix, Jrms-dependent IYRs are obtained. Considering all primary fission fragments contributing to the IYR for a given fission product, the average angular momentum of those fragments is estimated. Results: Data of 31 IYRs in proton-induced fission of 238U were analysed. As a result, the average Jrms, equivalent to average angular momentum Jav, with uncertainties of 24 fission products, are presented. Considering the neutron emissions of the primary fission fragments, the Jav as a function of the primary fission fragment is presented. A mass dependency of Jav is observed in the proton-induced fission of 238U. Moreover, the Jav for A larger than 131 could be described by the parameterisation proposed by J. Wilson. In general, higher Jav are observed in the present work compared to those from Wilson et al. This is likely due to the higher excitation energy of the fissioning nuclei in this work compared to Wilson's. Furthermore, systematic measurements of the Jav of fission products in the symmetric mass region are presented for the first time. A decreasing trend with mass numbers is observed, which can not be explained by the proposal in Wilson's paper.
△ Less
Submitted 18 March, 2024; v1 submitted 22 February, 2024;
originally announced February 2024.
-
Disentangling fission fragment evaporation models using TALYS
Authors:
Andreas Solders,
Andrea Mattera,
Ali Al-Adili,
Mattias Lantz,
Vasileios Rakopoulos,
Stephan Pomp
Abstract:
Several computer codes based on phenomenological models are being developed with the aim of obtaining fission observables, such as neutron and gamma multiplicities and product yields. Key points in these calculations, which are handled differently by the various codes, are the sharing of the total excitation energy between the fragments and the generation of angular momenta. After the initial stat…
▽ More
Several computer codes based on phenomenological models are being developed with the aim of obtaining fission observables, such as neutron and gamma multiplicities and product yields. Key points in these calculations, which are handled differently by the various codes, are the sharing of the total excitation energy between the fragments and the generation of angular momenta. After the initial states of the fragments is set, the de-excitation through the emission of neutrons and photons can be model. However, many models also include tunable parameters that are used to make the calculations conform with literature data. As a result, it could be possible to obtain good agreement with experimental results even with questionable assumptions on the initial conditions. To test the assumptions made by different fission models the code DE$\ell$FIN has been developed. DE$\ell$FIN starts with the fission fragments as generated by the models and calculates the average neutron emission as a function of mass in a transparent and coherent way using the nuclear reaction code TALYS. Hence, the probabilities of neutron emission in competition with $γ$ de-excitation comes from parameters of the TALYS code that have not been optimised. The results are then compared looking at general trends and at the difference to what is obtained with the stand-alone versions of the codes. In this study, the output of DE$\ell$FIN for five of the most commonly used fission codes is compared to the results of the stand-alone versions, and to experimental data, for the reactions $^{235}$U(n$_{\mathrm{th}}$,f), $^{239}$Pu(n$_{\mathrm{th}}$,f) and $^{252}$Cf(sf).
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Isomeric fission yield ratios for odd-mass Cd and In isotopes using the Phase-Imaging Ion-Cyclotron-Resonance technique
Authors:
V. Rakopoulos,
M. Lantz,
S. Pomp,
A. Solders,
A. Al-Adili,
L. Canete,
T. Eronen,
A. Jokinen,
A. Kankainen,
A. Mattera,
I. D. Moore,
D. A. Nesterenko,
M. Reponen,
S. Rinta-Antila,
A. de Roubin,
M. Vilén,
M. Österlund,
H. Penttilä
Abstract:
Isomeric yield ratios for the odd-$A$ isotopes of $^{119-127}$Cd and $^{119-127}$In from 25-MeV proton-induced fission on natural uranium have been measured at the JYFLTRAP double Penning trap, by employing the Phase-Imaging Ion-Cyclotron-Resonance technique. With the significantly improved mass resolution of this novel method isomeric states separated by 140 keV from the ground state, and with ha…
▽ More
Isomeric yield ratios for the odd-$A$ isotopes of $^{119-127}$Cd and $^{119-127}$In from 25-MeV proton-induced fission on natural uranium have been measured at the JYFLTRAP double Penning trap, by employing the Phase-Imaging Ion-Cyclotron-Resonance technique. With the significantly improved mass resolution of this novel method isomeric states separated by 140 keV from the ground state, and with half-lives of the order of 500 ms, could be resolved. This opens the door for obtaining new information on low-lying isomers, of importance for nuclear structure, fission and astrophysics. In the present work the experimental isomeric yield ratios are used for the estimation of the root-mean-square angular momentum ($J_\mathrm{rms}$) of the primary fragments. The results show a dependency on the number of unpaired protons and neutrons, where the odd-$Z$ In isotopes carry larger angular momenta. The deduced values of $J_\mathrm{rms}$ display a linear relationship when compared with the electric quadrupole moments of the fission products.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Defective fission correlation data from the 2E-2v method
Authors:
Kaj Jansson,
Ali Al-Adili,
Erik Andersson Sundén,
Stephan Pomp,
Alf Göök,
Stephan Oberstedt
Abstract:
The double-energy double-velocity ($2E$-$2v$) method allows assessing fission-fragment mass yields prior to and after prompt neutron emission with high resolution. It is, therefore, considered as a complementary technique to assess average prompt neutron multiplicity as a function of fragment properties. We have studied the intrinsic features of the $2E$-$2v$ method by means of event-wise generate…
▽ More
The double-energy double-velocity ($2E$-$2v$) method allows assessing fission-fragment mass yields prior to and after prompt neutron emission with high resolution. It is, therefore, considered as a complementary technique to assess average prompt neutron multiplicity as a function of fragment properties. We have studied the intrinsic features of the $2E$-$2v$ method by means of event-wise generated fission-fragment data and found severe short-comings in the method itself as well as in some common practice of application. We find that the $2E$-$2v$ method leads to large deviations in the correlation between the prompt neutron multiplicity and pre-neutron mass, which deforms and exaggerates the so called `sawtooth' shape of $\barν(A)$. We have identified the treatment of prompt neutron emission from the fragments as the origin of the problem. The intrinsic nature of this deficiency, risk to render $2E$-$2v$ experiments much less interesting. We suggest a method to correct the $2E$-$2v$ data, and recommend applying this method to previous data acquired in $2E$-$2v$ experiments, as well.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Designing an upgrade of the Medley setup for light-ion production and fission cross-section measurements
Authors:
Kaj Jansson,
Cecilia Gustavsson,
Ali Al-Adili,
Anders Hjalmarsson,
Erik Andersson-Sundén,
Alexander V. Prokofiev,
Diego Tarrío,
Stephan Pomp
Abstract:
Measurements of neutron-induced fission cross sections and light-ion production are planned in the energy range 1-40 MeV at the upcoming Neutrons For Science (NFS) facility. In order to prepare our detector setup for the neutron beam with continuous energy spectrum, a simulation software was written using the Geant4 toolkit for both measurement situations. The neutron energy range around 20 MeV is…
▽ More
Measurements of neutron-induced fission cross sections and light-ion production are planned in the energy range 1-40 MeV at the upcoming Neutrons For Science (NFS) facility. In order to prepare our detector setup for the neutron beam with continuous energy spectrum, a simulation software was written using the Geant4 toolkit for both measurement situations. The neutron energy range around 20 MeV is troublesome when it comes to the cross sections used by Geant4 since data-driven cross sections are only available below 20 MeV but not above, where they are based on semi-empirical models. Several customisations were made to the standard classes in Geant4 in order to produce consistent results over the whole simulated energy range.
Expected uncertainties are reported for both types of measurements. The simulations have shown that a simultaneous precision measurement of the three standard cross sections H(n,n), $^{235}$U(n,f) and $^{238}$U(n,f) relative to each other is feasible using a triple layered target. As high resolution timing detectors for fission fragments we plan to use Parallel Plate Avalanche Counters (PPACs). The simulation results have put some restrictions on the design of these detectors as well as on the target design. This study suggests a fissile target no thicker than 2 micrometers (1.7 mg/cm$^2$) and a PPAC foil thickness preferably less than 1 micrometer. We also comment on the usability of Geant4 for simulation studies of neutron reactions in this energy range.
△ Less
Submitted 23 June, 2015;
originally announced June 2015.
-
Ion counting efficiencies at the IGISOL facility
Authors:
A. Al-Adili,
K. Jansson,
M. Lantz,
A. Solders,
C. Gustavsson,
A. Mattera,
A. V. Prokofiev,
V. Rakopoulos,
D. Tarrío,
S. Wiberg,
M. Österlund,
S. Pomp
Abstract:
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) a…
▽ More
At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) affect the stop** efficiency in the gas cell. In addition, different experimental parameters are varied (e. g. U and Ni thickness and He gas pressure) to study their impact on the stop** efficiency. The simulations were performed using the Geant4 package and the SRIM code. The main results suggest a small variation in the stop** efficiency as a function of mass, charge and kinetic energy. It is predicted that heavy fragments are stopped about 9% less efficiently than the light fragments. However it was found that the properties of the U, Ni and the He gas influences this behavior. Hence it could be possible to optimize the efficiency.
△ Less
Submitted 2 September, 2014;
originally announced September 2014.
-
Sensitivity of measured fission yields on prompt-neutron corrections
Authors:
A. Al-Adili,
F. -J. Hambsch,
S. Pomp,
S. Oberstedt
Abstract:
The amount of emitted prompt neutrons from the fission fragments increases as a function of excitation energy. Yet it is not fully understood whether the increase in ν(A) as a function of E_{n} is mass dependent. The share of excitation energies among the fragments is still under debate, but there are reasons to believe that the excess in neutron emission originates only from the heavy fragments,…
▽ More
The amount of emitted prompt neutrons from the fission fragments increases as a function of excitation energy. Yet it is not fully understood whether the increase in ν(A) as a function of E_{n} is mass dependent. The share of excitation energies among the fragments is still under debate, but there are reasons to believe that the excess in neutron emission originates only from the heavy fragments, leaving ν_{light}(A) almost unchanged. In this work we investigated the consequences of a mass-dependent increase in ν(A) on the final mass and energy distributions. The assumptions on ν(A) are essential when analysing measurements based on the 2E-technique. This choice showed to be significant on the measured observables. For example, the post-neutron emission mass yield distribution revealed changes up to 10-30%. The outcome of this work pinpoint the urgent need to determine ν(A) experimentally, and in particular, how ν(A) changes as a function of incident-neutron energy. Until then, many fission yields in the data libraries could be largely affected, since they were analysed based on another assumption on the neutron emission.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
Simulations of Doppler Effects in Nuclear Reactions for AGATA Commissioning Experiments
Authors:
Ali Al-Adili
Abstract:
The purpose of this master thesis is to simulate suitable nuclear reactions for a commissioning experiment, to be performed with the AGATA gamma-ray tracking spectrometer. The main aim of the work is to find a reaction, which gives large Doppler effects of the emitted gamma rays, with as small contribution as possible due to the energy and angular spread of the nuclei emitting the gamma rays. In…
▽ More
The purpose of this master thesis is to simulate suitable nuclear reactions for a commissioning experiment, to be performed with the AGATA gamma-ray tracking spectrometer. The main aim of the work is to find a reaction, which gives large Doppler effects of the emitted gamma rays, with as small contribution as possible due to the energy and angular spread of the nuclei emitting the gamma rays. Inverse kinematics heavy-ion (HI) fusion reactions of the type (HI,gamma), (HI, n) on proton and deuteron targets have been studied. Target effects were investigated using the program TRIM in order to determine the impact on the Doppler effects caused by energy and angular straggling in the target material. The cross sections of a large number of reactions of protons and deuterons on nuclei with mass numbers in the range A=20-100 have been evaluated using the TALYS reaction code. The fusion-evaporation reactions, d(V-51,n)Cr-52 and d(Cl-37,n)Ar-38 were simulated in detail using the Monte Carlo code evapOR. The interactions in AGATA of the gamma rays emitted in these reactions were simulated using Geant4. The energy resolution of the gamma rays after gamma-ray tracking and Doppler correction were determined as a function of the interaction position resolution of the germanium detectors. The conclusion of this work is that of the two reactions d(V-51,n)Cr-52 is more suitable for an AGATA commissioning experiment.
△ Less
Submitted 25 September, 2009;
originally announced September 2009.
-
AGATA: Gamma-ray tracking in segmented HPGe detectors
Authors:
P. -A. Söderström,
A. Al-Adili,
J. Nyberg,
F. Recchia,
E. Farnea,
A. Gadea
Abstract:
The next generation of radioactive ion beam facilities, which will give experimental access to many exotic nuclei, are presently being developed. At the same time the next generation of high resolution gamma-ray spectrometers, based on gamma-ray tracking, for studying the structure of these exotic nuclei are being developed. One of the main differences in tracking of $γ$ rays versus charged part…
▽ More
The next generation of radioactive ion beam facilities, which will give experimental access to many exotic nuclei, are presently being developed. At the same time the next generation of high resolution gamma-ray spectrometers, based on gamma-ray tracking, for studying the structure of these exotic nuclei are being developed. One of the main differences in tracking of $γ$ rays versus charged particles is that the gamma rays do not deposit their energy "continuously" in the detector, but in a few discrete steps. Also, in the field of nuclear spectroscopy, the location of the source is mostly well known while the exact interaction position in the detector is the unknown quantity. This makes the challenges of gamma-ray tracking in germanium somewhat different compared to vertexing in silicon detectors. In these proceedings we present the methods for determining the 3D interaction positions in the detector and how these are used to reconstruct the gamma-ray tracks in the AGATA detector array. We also present preliminary simulation results of a proposed in-beam method to measure the interaction position resolution in the germanium detectors.
△ Less
Submitted 29 November, 2008;
originally announced December 2008.
