-
On the Temporal Effects of Mobile Blockers in Urban Millimeter-Wave Cellular Scenarios
Authors:
Margarita Gapeyenko,
Andrey Samuylov,
Mikhail Gerasimenko,
Dmitri Moltchanov,
Sarabjot Singh,
Mustafa Riza Akdeniz,
Ehsan Aryafar,
Nageen Himayat,
Sergey Andreev,
Yevgeni Koucheryavy
Abstract:
Millimeter-wave (mmWave) propagation is known to be severely affected by the blockage of the line-of-sight (LoS) path. In contrast to microwave systems, at shorter mmWave wavelengths such blockage can be caused by human bodies, where their mobility within environment makes wireless channel alternate between the blocked and non-blocked LoS states. Following the recent 3GPP requirements on modeling…
▽ More
Millimeter-wave (mmWave) propagation is known to be severely affected by the blockage of the line-of-sight (LoS) path. In contrast to microwave systems, at shorter mmWave wavelengths such blockage can be caused by human bodies, where their mobility within environment makes wireless channel alternate between the blocked and non-blocked LoS states. Following the recent 3GPP requirements on modeling the dynamic blockage as well as the temporal consistency of the channel at mmWave frequencies, in this paper a new model for predicting the state of a user in the presence of mobile blockers for representative 3GPP scenarios is developed: urban micro cell (UMi) street canyon and park/stadium/square. It is demonstrated that the blockage effects produce an alternating renewal process with exponentially distributed non-blocked intervals, and blocked durations that follow the general distribution. The following metrics are derived (i) the mean and the fraction of time spent in blocked/non-blocked state, (ii) the residual blocked/non-blocked time, and (iii) the time-dependent conditional probability of having blockage/no blockage at time t1 given that there was blockage/no blockage at time t0. The latter is a function of the arrival rate (intensity), width, and height of moving blockers, distance to the mmWave access point (AP), as well as the heights of the AP and the user device. The proposed model can be used for system-level characterization of mmWave cellular communication systems. For example, the optimal height and the maximum coverage radius of the mmWave APs are derived, while satisfying the required mean data rate constraint. The system-level simulations corroborate that the use of the proposed method considerably reduces the modeling complexity.
△ Less
Submitted 22 September, 2017; v1 submitted 15 May, 2017;
originally announced May 2017.
-
5G mmWave Module for ns-3 Network Simulator
Authors:
Marco Mezzavilla,
Sourjya Dutta,
Menglei Zhang,
Mustafa Riza Akdeniz,
Sundeep Rangan
Abstract:
The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and mo…
▽ More
The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and more sensitive to obstacles. The resulting key aspects that need to be taken into account when designing mmWave cellular systems are directionality and link intermittency. The lack of network level results motivated this work, which aims at providing the first of a kind open source mmWave framework, based on the network simulator ns-3. The main focus of this work is the modeling of customizable channel, physical (PHY) and medium access control (MAC) layers for mmWave systems. The overall design and architecture of the model are discussed in details. Finally, the validity of our proposed framework is corroborated through the simulation of a simple scenario.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
Millimeter Wave Channel Modeling and Cellular Capacity Evaluation
Authors:
Mustafa Riza Akdeniz,
Yuanpeng Liu,
Mathew K. Samimi,
Shu Sun,
Sundeep Rangan,
Theodore S. Rappaport,
Elza Erkip
Abstract:
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further…
▽ More
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York City to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters including the path loss, number of spatial clusters, angular dispersion and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100 m to 200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.
△ Less
Submitted 25 April, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Millimeter Wave Picocellular System Evaluation for Urban Deployments
Authors:
Mustafa Riza Akdeniz,
Yuanpeng Liu,
Sundeep Rangan,
Elza Erkip
Abstract:
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further…
▽ More
With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via spatial multiplexing. However, the propagation of mmW signals in outdoor non line-of-sight (NLOS) links remains challenging and the feasibility of wide-area mmW cellular networks is far from clear. This paper uses recent real-world measurements at 28 GHz in New York City to provide a realistic assessment of mmW picocellular networks in a dense urban deployment. It is found that, even under conservative propagation assumptions, mmW systems with cell radii of 100m can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with similar cell density. However, it is also shown that such mmW networks may operate in a largely power-limited regime where the full spatial and bandwidth degrees of freedom are not fully utilized. This power-limited regime contrasts significantly with current bandwidth-limited cellular systems, requiring alternate technologies for mmW systems that may unlock further gains that mmW frequency bands offer.
△ Less
Submitted 25 April, 2014; v1 submitted 14 April, 2013;
originally announced April 2013.
-
Wireless Scheduling with Dominant Interferers and Applications to Femtocellular Interference Cancellation
Authors:
Mustafa Riza Akdeniz,
Sundeep Rangan
Abstract:
We consider a general class of wireless scheduling and resource allocation problems where the received rate in each link is determined by the actions of the transmitter in that link along with a single dominant interferer. Such scenarios arise in a range of scenarios, particularly in emerging femto- and picocellular networks with strong, localized interference. For these networks, a utility maximi…
▽ More
We consider a general class of wireless scheduling and resource allocation problems where the received rate in each link is determined by the actions of the transmitter in that link along with a single dominant interferer. Such scenarios arise in a range of scenarios, particularly in emerging femto- and picocellular networks with strong, localized interference. For these networks, a utility maximizing scheduler based on loopy belief propagation is presented that enables computationally-efficient local processing and low communication overhead. Our main theoretical result shows that the fixed points of the method are provably globally optimal for arbitrary (potentially non-convex) rate and utility functions. The methodology thus provides globally optimal solutions to a large class of inter-cellular interference coordination problems including subband scheduling, dynamic orthogonalization and beamforming whenever the dominant interferer assumption is valid. The paper focuses on applications for systems with interference cancellation (IC) and suggests a new scheme on optimal rate control, as opposed to traditional power control. Simulations are presented in industry standard femtocellular network models demonstrate significant improvements in rates over simple reuse 1 without IC, and near optimal performance of loopy belief propagation for rate selection in only one or two iterations.
△ Less
Submitted 29 July, 2012;
originally announced July 2012.