-
Optimization of RF phase and beam loading distribution among RF stations in SuperKEKB
Authors:
S. Ogasawara,
K. Akai,
T. Kobayashi,
K. Nakanishi,
M. Nishiwaki
Abstract:
SuperKEKB is the e-/e+ collider which targets the world highest luminosity. In recent operation, SuperKEKB achieved a new world record of $4.71\times 10^{34} cm^{-2}s^{-1}$ for luminosity with the beam current of 1.4 A. In the future, the beam current will be increased further to aim at the design value of 3.6 A and much higher luminosity. The RF system consists of 38 cavities (30 klystron station…
▽ More
SuperKEKB is the e-/e+ collider which targets the world highest luminosity. In recent operation, SuperKEKB achieved a new world record of $4.71\times 10^{34} cm^{-2}s^{-1}$ for luminosity with the beam current of 1.4 A. In the future, the beam current will be increased further to aim at the design value of 3.6 A and much higher luminosity. The RF system consists of 38 cavities (30 klystron stations), which share the huge beam loading brought by high current beam with each other cavities. For beam stability and power efficiency, it is important to distribute the beam loading properly among RF cavities. It is equivalent to adjust the acceleration phase of each cavity. However, it is difficult to evaluate the acceleration phase using only the pickup signal. Therefore, we established a method to evaluate the beam loading balance among RF stations from the RF power measurement for each cavity, and to adjust the acceleration phase. This report introduces the method for evaluating and optimizing the beam loading (acceleration phase) among stations in SuperKEKB, which has a large number of RF stations, and its operation.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
SuperKEKB Collider
Authors:
Kazunori Akai,
Kazuro Furukawa,
Haruyo Koiso
Abstract:
SuperKEKB, a 7 GeV electron - 4 GeV positron double-ring collider, is constructed by upgrading KEKB in order to seek new physics beyond the Standard Model. The design luminosity of SuperKEKB is 8 x 10^35 /cm^2 /s - 40 times higher than that achieved by KEKB. The greater part of the gain comes from significantly decreasing the beam sizes at the interaction point based on the nanobeam collision sche…
▽ More
SuperKEKB, a 7 GeV electron - 4 GeV positron double-ring collider, is constructed by upgrading KEKB in order to seek new physics beyond the Standard Model. The design luminosity of SuperKEKB is 8 x 10^35 /cm^2 /s - 40 times higher than that achieved by KEKB. The greater part of the gain comes from significantly decreasing the beam sizes at the interaction point based on the nanobeam collision scheme; the design beam currents in both rings are double those achieved in KEKB. Large-scale construction to upgrade both the collider rings and the injector was conducted, and beam commissioning without the Belle II detector and final-focus magnets was successfully carried out from February to June in 2016. Subsequently, renovation of the interaction region, including the installation of the final-focus magnets and Belle II, and construction in the final stage of a new positron dam** ring were conducted. Having completed the interaction region, beam collision tuning is scheduled from March till July in 2018. This paper reviews the design, construction, and beam commissioning of SuperKEKB.
△ Less
Submitted 10 September, 2018; v1 submitted 6 September, 2018;
originally announced September 2018.
-
A New Damper for Coupled-Bunch Instabilities caused by the accelerating mode at SuperKEKB
Authors:
Kouki Hirosawa,
Kazunori Akai,
Eizi Ezura,
Tetsuya Kobayashi,
Kota Nakanishi,
Shin-ichi Yoshimoto
Abstract:
SuperKEKB is an asymmetric electron-positron circular collider based on nano-beam scheme at interaction region and large beam current. Large beam current makes growth rates of longitudinal coupled-bunch instabilities (LCBI) large. Especially some lowest modes near accelerating frequency are serious. On the design parameter for SuperKEKB, $μ$ = -1, -2, -3 mode of LCBI can be destabilized. We develo…
▽ More
SuperKEKB is an asymmetric electron-positron circular collider based on nano-beam scheme at interaction region and large beam current. Large beam current makes growth rates of longitudinal coupled-bunch instabilities (LCBI) large. Especially some lowest modes near accelerating frequency are serious. On the design parameter for SuperKEKB, $μ$ = -1, -2, -3 mode of LCBI can be destabilized. We developed new LCBI damper to suppress newly arisen LCBI modes ($μ$ = -1, -2, -3) in SuperKEKB. The new damper will be installed in Low Level RF control system. The new LCBI damper is independent of main LLRF control components. In the test bench measurement, our new LCBI damper has good performance and satisfied required specifications. For preparation of using LCBI damper, we produced the simulation of beam oscillation damped by RF feedback. The results of this simulation shows that we need more dampers than them we prepared. We report profile of new damper and results of test bench measurement and feedback simulation in this paper.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
LLRF controls in SuperKEKB Phase-1 commissioning
Authors:
T. Kobayashi,
K. Akai,
K. Ebihara,
A. Kabe,
K. Nakanishi,
M. Nishiwaki,
J. Odagiri,
S. Yoshimoto,
K. Hirosawa
Abstract:
First beam commissioning of SuperKEKB (Phase-1), which is an asymmetry double ring collider of 7-GeV electron and 4-GeV positron beams, which had started from February, has been successfully accomplished at the end of June 2016, and the desired beam current for Phase-1 was achieved in both rings. This paper summarize the operation results related to low level RF (LLRF) control issues during the Ph…
▽ More
First beam commissioning of SuperKEKB (Phase-1), which is an asymmetry double ring collider of 7-GeV electron and 4-GeV positron beams, which had started from February, has been successfully accomplished at the end of June 2016, and the desired beam current for Phase-1 was achieved in both rings. This paper summarize the operation results related to low level RF (LLRF) control issues during the Phase-1 commissioning, including the system tuning, the coupled bunch instability and the bunch gap transient effect. RF system of SuperKEKB consists of about thirty klystron stations in both rings. Newly developed LLRF control systems were applied to the nine stations among the thirty for Phase-1. The RF reference signal distribution system has been also upgraded for SuperKEKB. These new systems worked well without serious problem and they contributed to smooth progress of the commissioning. The old existing systems, which had been used in the KEKB operation, were still reused for the most stations, and they also worked as soundly as performed in the KEKB operation.
△ Less
Submitted 23 March, 2018;
originally announced March 2018.
-
The Physics of the B Factories
Authors:
A. J. Bevan,
B. Golob,
Th. Mannel,
S. Prell,
B. D. Yabsley,
K. Abe,
H. Aihara,
F. Anulli,
N. Arnaud,
T. Aushev,
M. Beneke,
J. Beringer,
F. Bianchi,
I. I. Bigi,
M. Bona,
N. Brambilla,
J. B rodzicka,
P. Chang,
M. J. Charles,
C. H. Cheng,
H. -Y. Cheng,
R. Chistov,
P. Colangelo,
J. P. Coleman,
A. Drutskoy
, et al. (2009 additional authors not shown)
Abstract:
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary…
▽ More
This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C.
Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026.
△ Less
Submitted 31 October, 2015; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
KEKB Beam Collision Stability at the Picosecond Timing and Micron Position Resolution as observed with the Belle Detector
Authors:
H. Kichimi,
K. Trabelsi,
S. Uehara,
M. Nakao,
K. Akai,
T. Ieiri,
M. Tobiyama,
M. D. Jones,
M. W. Peters,
G. S. Varner,
T. E. Browder
Abstract:
Using the Belle detector we study the characteristics of beam collisions at the KEKB 3.5 GeV $e^+$ on 8 GeV $e^-$ asymmetric energy collider. We investigate the collision timing {\tip} and its $z$-coordinate along the beam axis {\zip} as a function of the position of the colliding bunch in a beam train. The various {\tip} and {\zip} behaviors observed by Belle are attributed to beam loading effe…
▽ More
Using the Belle detector we study the characteristics of beam collisions at the KEKB 3.5 GeV $e^+$ on 8 GeV $e^-$ asymmetric energy collider. We investigate the collision timing {\tip} and its $z$-coordinate along the beam axis {\zip} as a function of the position of the colliding bunch in a beam train. The various {\tip} and {\zip} behaviors observed by Belle are attributed to beam loading effects in the radio frequency cavities that accelerate the beams with a beam abort gap. We report these results in detail and discuss the prospects for the SuperKEKB collider.
△ Less
Submitted 20 March, 2010; v1 submitted 7 January, 2010;
originally announced January 2010.
-
Compensation of the Crossing Angle with Crab Cavities at KEKB
Authors:
T. Abe,
K. Akai,
M. Akemoto,
A. Akiyama,
M. Arinaga,
K. Ebihara,
K. Egawa,
A. Enomoto,
J. Flanagan,
S. Fukuda,
H. Fukuma,
Y. Funakoshi,
K. Furukawa,
T. Furuya,
K. Hara,
T. Higo,
S. Hiramatsu,
H. Hisamatsu,
H. Honma,
T. Honma,
K. Hosoyama,
T. Ieiri,
N. Iida,
H. Ikeda,
M. Ikeda
, et al. (90 additional authors not shown)
Abstract:
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than…
▽ More
Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
