-
Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets
Authors:
Kai Yuan Huang,
Yunhua Shi,
Jan Srpčič,
Mark D Ainslie,
Devendra K Namburi,
Anthony R Dennis,
Difan Zhou,
Martin Boll,
Mykhaylo Filipenko,
Jan Jaroszynski,
Eric E Hellstrom,
David A Cardwell,
John H Durrell
Abstract:
Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and,…
▽ More
Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and, secondly, catastrophic thermal instabilities as a result of flux movement during magnetization. Moreover, for a batch of samples nominally fabricated identically, the statistical nature of the failure mechanism means the best performance (i.e. trapped fields of over 17 T) cannot be attained reliably. The magnetization process, particularly to higher fields, also often damages the samples such that they cannot repeatedly trap high fields following subsequent magnetization. In this study, we report the sequential trap** of magnetic fields of ~ 17 T, achieving 16.8 T at 26 K initially and 17.6 T at 22.5 K subsequently, in a stack of two Ag-doped GdBa2Cu3O7-δ bulk superconductor composites of diameter 24 mm reinforced with (1) stainless-steel laminations, and (2) shrink-fit stainless steel rings. A trapped field of 17.6 T is, in fact, comparable with the highest trapped fields reported to date for bulk superconducting magnets of any mechanical and chemical composition, and this was achieved using the first composite stack to be fabricated by this technique.
△ Less
Submitted 3 December, 2019; v1 submitted 22 August, 2019;
originally announced August 2019.
-
Electromagnetic design of a superconducting electric machine with bulk HTS material
Authors:
Roman Bause,
Mark D. Ainslie,
Matthias Corduan,
Martin Boll,
Mykhaylo Filipenko,
Mathias Noe
Abstract:
The use of high-temperature superconductors in electric machines offers potentially large gains in performance compared to conventional conductors, but also comes with unique challenges. Here, the electromagnetic properties of superconducting electric machines with bulk HTS trapped-field magnets in the rotor and conventional copper coils in the stator are investigated. To this end, an analytical m…
▽ More
The use of high-temperature superconductors in electric machines offers potentially large gains in performance compared to conventional conductors, but also comes with unique challenges. Here, the electromagnetic properties of superconducting electric machines with bulk HTS trapped-field magnets in the rotor and conventional copper coils in the stator are investigated. To this end, an analytical model of the electromagnetic field in radial air-gap synchronous electric machines is developed and validated, taking into account the specific difficulties that occur in the treatment of machines with bulk HTS. Using this model, the influence of pole pair number, stator winding thickness, rotor surface coverage, and air gap width on the machine's Esson coefficient is calculated. In contrast to numerical simulations, the method presented here can provide results within minutes, making it particularly useful for work in early development and systems engineering, where large parameter spaces must be investigated quickly.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
A portable magnetic field of > 3 T generated by the flux jump assisted, pulsed field magnetisation of bulk superconductors
Authors:
Difan Zhou,
Mark D. Ainslie,
Yunhua Shi,
Anthony R. Dennis,
Kaiyuan Huang,
John R. Hull,
David A. Cardwell,
John H. Durrell
Abstract:
A trapped magnetic field of greater than 3 T has been achieved in a single grain GdBa2Cu3O7-δ (GdBaCuO) bulk superconductor of diameter 30 mm by employing pulsed field magnetisation (PFM). The magnet system is portable and operates at temperatures between 50 K and 60 K. Flux jump behaviour was observed consistently during magnetisation when the applied pulsed field, Ba, exceeded a critical value (…
▽ More
A trapped magnetic field of greater than 3 T has been achieved in a single grain GdBa2Cu3O7-δ (GdBaCuO) bulk superconductor of diameter 30 mm by employing pulsed field magnetisation (PFM). The magnet system is portable and operates at temperatures between 50 K and 60 K. Flux jump behaviour was observed consistently during magnetisation when the applied pulsed field, Ba, exceeded a critical value (e.g. 3.78 T at 60 K). A sharp dBa/dt is essential to this phenomenon. This flux jump behaviour enables the magnetic flux to penetrate fully to the centre of the bulk superconductor, resulting in full magnetization of the sample without requiring an applied field as large as that predicted by the Bean model. We show that this flux jump behaviour can occur over a wide range of fields and temperatures, and that it can be exploited in a practical quasi-permanent magnet system.
△ Less
Submitted 1 January, 2017;
originally announced January 2017.
-
DC Characterization of a Circular, Epoxy-Impregnated High Temperature Superconducting (HTS) Coil
Authors:
Di Hu,
Mark D. Ainslie,
Jordan P. Rush,
John H. Durrell,
** Zou
Abstract:
Direct current (DC) characterization of high temperature superconducting (HTS) coils is important for HTS applications, such as electric machines, superconducting magnetic energy storage (SMES) and transformers. In this paper, DC characterization of a circular, epoxy-impregnated HTS coil made from YBCO coated conductor for use as a prototype axial flux HTS electric machine is presented. Multiple v…
▽ More
Direct current (DC) characterization of high temperature superconducting (HTS) coils is important for HTS applications, such as electric machines, superconducting magnetic energy storage (SMES) and transformers. In this paper, DC characterization of a circular, epoxy-impregnated HTS coil made from YBCO coated conductor for use as a prototype axial flux HTS electric machine is presented. Multiple voltage taps were utilized within the coil during measurement to help provide further detailed information on its DC behavior as a function of length. Based on the experimental results, there exist regions of non-uniformity along the length of superconductor in the coil, resulting in non-ideal superconducting properties of the coil. By studying the current-voltage (I-V) curves across different regions, it is found that a decreasing n-value and critical current exists in the non-uniform parts of the HTS coil.
△ Less
Submitted 24 December, 2015;
originally announced December 2015.
-
A Trapped Field of 17.6 T in Melt-Processed, Bulk Gd-Ba-Cu-O Reinforced with Shrink-Fit Steel
Authors:
John H. Durrell,
Anthony R. Dennis,
Jan Jaroszynski,
Mark D. Ainslie,
Kysen G. B. Palmer,
Yunhua Shi,
Archie M. Campbell,
John Hull,
Mike Strasik,
Eric Hellstrom,
David A. Cardwell
Abstract:
The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance impr…
▽ More
The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter 25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source.
△ Less
Submitted 7 July, 2014; v1 submitted 3 June, 2014;
originally announced June 2014.
-
Design and market considerations for axial flux superconducting electric machine design
Authors:
Mark D. Ainslie,
Ashley George,
Robert Shaw,
Lewis Dawson,
Andy Winfield,
Marina Steketee,
Simon Stockley
Abstract:
In this paper, the authors investigate a number of design and market considerations for an axial flux superconducting electric machine design that uses high temperature superconductors. This work was carried out as part of the University of Cambridge's Centre for Entrepreneurial Learning ETECH Project programme, designed to accelerate entrepreneurship and diffusion of innovations based on early st…
▽ More
In this paper, the authors investigate a number of design and market considerations for an axial flux superconducting electric machine design that uses high temperature superconductors. This work was carried out as part of the University of Cambridge's Centre for Entrepreneurial Learning ETECH Project programme, designed to accelerate entrepreneurship and diffusion of innovations based on early stage and potentially disruptive technologies from the University. The axial flux machine design is assumed to utilise high temperature superconductors in both wire (stator winding) and bulk (rotor field) forms, to operate over a temperature range of 65-77 K, and to have a power output in the range from 10s of kW up to 1 MW (typical for axial flux machines), with approximately 2-3 T as the peak trapped field in the bulk superconductors. The authors firstly investigate the applicability of this type of machine as a generator in small- and medium-sized wind turbines, including the current and forecasted market and pricing for conventional turbines. A study is also carried out on the machine's applicability as an in-wheel hub motor for electric vehicles. Some recommendations for future applications are made based on the outcome of these two studies. Next, the cost of YBCO-based superconducting (2G HTS) wire is analysed with respect to competing wire technologies and compared with current conventional material costs. Current wire costs for both 1G and 2G HTS are still too great to be economically feasible for such superconducting devices, but round wire, so-called 3G HTS, conductors may be a promising new option with a view to the future. Finally, different cooling options are assessed for the machine design and the analysis suggests that waiting for the maturation of pulse-tube cooling technology may be the best option for this particular application.
△ Less
Submitted 5 March, 2014; v1 submitted 18 September, 2013;
originally announced September 2013.
-
Analysis of fields in an air-cored superconducting synchronous motor with an HTS racetrack field winding
Authors:
Di Hu,
** Zou,
Tim J. Flack,
Xiaozhuo Xu,
Haichao Feng,
Mark D. Ainslie
Abstract:
High temperature superconducting (HTS) synchronous motors can offer significant weight and size reductions, as well as improved efficiency, over conventional copper-wound machines due to the higher current density of high temperature superconducting (HTS) materials. In order to optimise the design parameters and performance of such a machine, this paper proposes a basic physical model of an air-co…
▽ More
High temperature superconducting (HTS) synchronous motors can offer significant weight and size reductions, as well as improved efficiency, over conventional copper-wound machines due to the higher current density of high temperature superconducting (HTS) materials. In order to optimise the design parameters and performance of such a machine, this paper proposes a basic physical model of an air-cored HTS synchronous motor with a copper armature winding and HTS field winding. An analytical method for the field analysis in the synchronous motor is then presented, followed by a numerical finite element analysis (FEA) model to verify the analytical solution. The model is utilised to study the influence of the geometry of the HTS coils on the magnetic field at the armature winding, and geometrical parameter optimisation is carried out using this theoretical model to obtain a more sinusoidal magnetic field at the armature, which has a major influence on the performance of the motor.
△ Less
Submitted 9 October, 2014; v1 submitted 15 May, 2013;
originally announced May 2013.
-
Design and Performance Analysis of a 2.5 MW-Class HTS Synchronous Motor for Ship Propulsion
Authors:
** Zou,
Di Hu,
Tim J. Flack,
Haichao Feng,
Xiaozhuo Xu,
Mark D. Ainslie
Abstract:
The development of cryogenic technology and high temperature superconducting (HTS) materials has seen continued interest worldwide in the development of HTS machines since the late 1980s. In this paper, the authors present a conceptual design of a 2.5 MW class synchronous motor. The structure of the motor is specified and the motor performance is analyzed via a three-dimensional model using the fi…
▽ More
The development of cryogenic technology and high temperature superconducting (HTS) materials has seen continued interest worldwide in the development of HTS machines since the late 1980s. In this paper, the authors present a conceptual design of a 2.5 MW class synchronous motor. The structure of the motor is specified and the motor performance is analyzed via a three-dimensional model using the finite element method (FEM). Rotor optimization is carried out to decrease the harmonic components in the air gap field generated by HTS tapes. Based on the results of this 3D simulation, the determination of the operating conditions and load angle is discussed with consideration to the HTS material properties. The economic viability of air-core and iron-core designs is compared. The results show that this type of HTS machine has the potential to achieve an economic, efficient and effective machine design, which operates at a low load angle, and this design process provides a practical way to simulate and analyze the performance of such machines.
△ Less
Submitted 13 October, 2014; v1 submitted 15 May, 2013;
originally announced May 2013.
