-
Efficient algorithms for dynamic aperture and momentum acceptance calculation
Authors:
Bernard Riemann,
Masamitsu Aiba,
Jonas Kallestrup,
Andreas Streun
Abstract:
New algorithms useful for the calculation of dynamic aperture and momentum acceptance in circular accelerators are developed and presented. The flood-fill tool from raster graphics inspired us to efficiently compute dynamic apertures by minimizing required trackings on stable initial coordinates, leading to several factors of speed-up with respect to standard algorithms. A novel technique for mome…
▽ More
New algorithms useful for the calculation of dynamic aperture and momentum acceptance in circular accelerators are developed and presented. The flood-fill tool from raster graphics inspired us to efficiently compute dynamic apertures by minimizing required trackings on stable initial coordinates, leading to several factors of speed-up with respect to standard algorithms. A novel technique for momentum acceptance calculations, Fast Touschek Tracking, is developed. Thorough benchmarking using modern accelerator codes shows that the new technique can provide one or two orders of magnitude faster computation of local momentum acceptances with only limited loss of accuracy.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Science Case for the new High-Intensity Muon Beams HIMB at PSI
Authors:
M. Aiba,
A. Amato,
A. Antognini,
S. Ban,
N. Berger,
L. Caminada,
R. Chislett,
P. Crivelli,
A. Crivellin,
G. Dal Maso,
S. Davidson,
M. Hoferichter,
R. Iwai,
T. Iwamoto,
K. Kirch,
A. Knecht,
U. Langenegger,
A. M. Lombardi,
H. Luetkens,
F. Meier Aeschbacher,
T. Mori,
J. Nuber,
W. Ootani,
A. Papa,
T. Prokscha
, et al. (11 additional authors not shown)
Abstract:
In April 2021, scientists active in muon physics met to discuss and work out the physics case for the new High-Intensity Muon Beams (HIMB) project at PSI that could deliver of order $10^{10}$\,s$^{-1}$ surface muons to experiments. Ideas and concrete proposals were further substantiated over the following months and assembled in the present document. The high intensities will allow for completely…
▽ More
In April 2021, scientists active in muon physics met to discuss and work out the physics case for the new High-Intensity Muon Beams (HIMB) project at PSI that could deliver of order $10^{10}$\,s$^{-1}$ surface muons to experiments. Ideas and concrete proposals were further substantiated over the following months and assembled in the present document. The high intensities will allow for completely new experiments with considerable discovery potential and unique sensitivities. The physics case is outstanding and extremely rich, ranging from fundamental particle physics via chemistry to condensed matter research and applications in energy research and elemental analysis. In all these fields, HIMB will ensure that the facilities S$μ$S and CHRISP on PSI's High Intensity Proton Accelerator complex HIPA remain world-leading, despite the competition of muon facilities elsewhere.
△ Less
Submitted 10 November, 2021;
originally announced November 2021.
-
Design of beam optics for the Future Circular Collider e+e- -collider rings
Authors:
K. Oide,
M. Aiba,
S. Aumon,
M. Benedikt,
A. Blondel,
A. Bogomyagkov,
M. Boscolo,
H. Burkhardt,
Y. Cai,
A. Doblhammer,
B. Haerer,
B. Holzer,
J. M. Jowett,
I. Koop,
M. Koratzinos,
E. Levichev,
L. Medina,
K. Ohmi,
Y. Papaphilippou,
P. Piminov,
D. Shatilov,
S. Sinyatkin,
M. Sullivan,
J. Wenninger,
U. Wienands
, et al. (2 additional authors not shown)
Abstract:
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromatici…
▽ More
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility
Authors:
T. Schietinger,
M. Pedrozzi,
M. Aiba,
V. Arsov,
S. Bettoni,
B. Beutner,
M. Calvi,
P. Craievich,
M. Dehler,
F. Frei,
R. Ganter,
C. P. Hauri,
R. Ischebeck,
Y. Ivanisenko,
M. Janousch,
M. Kaiser,
B. Keil,
F. Löhl,
G. L. Orlandi,
C. Ozkan Loch,
P. Peier,
E. Prat,
J. -Y. Raguin,
S. Reiche,
T. Schilcher
, et al. (70 additional authors not shown)
Abstract:
The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and testbed for the development and realization of SwissFEL, the X-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chican…
▽ More
The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and testbed for the development and realization of SwissFEL, the X-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultra-low-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measurements performed during the operation of the test facility, including the results of the test of an in-vacuum undulator prototype generating radiation in the vacuum ultraviolet and optical range.
△ Less
Submitted 27 October, 2016; v1 submitted 8 June, 2016;
originally announced June 2016.
