-
Comment on "Multiconfiguration Dirac-Fock energy levels and radiative rates for Br-like tungsten" by S. Aggarwal, A.K.S. Jha, and M. Mohan [Can . J. Phys. 91 (2013) 394]
Authors:
K. M. Aggarwal,
F. P. Keenan
Abstract:
We report calculations of energy levels and oscillator strengths for transitions in W XL, undertaken with the general-purpose relativistic atomic structure package ({\sc grasp}) and flexible atomic code ({\sc fac}). Comparisons are made with existing results and the accuracy of the data is assessed. Discrepancies with the most recent results of S. Aggarwal et al. [Can. J. Phys. {\bf 91} (2013) 394…
▽ More
We report calculations of energy levels and oscillator strengths for transitions in W XL, undertaken with the general-purpose relativistic atomic structure package ({\sc grasp}) and flexible atomic code ({\sc fac}). Comparisons are made with existing results and the accuracy of the data is assessed. Discrepancies with the most recent results of S. Aggarwal et al. [Can. J. Phys. {\bf 91} (2013) 394] are up to 0.4 Ryd and up to two orders of magnitude for energy levels and oscillator strengths, respectively. Discrepancies for lifetimes are even larger, up to four orders of magnitude for some levels. Our energy levels are estimated to be accurate to better than 0.5% (i.e. 0.2 Ryd), whereas results for oscillator strengths and lifetimes should be accurate to better than 20%.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Energy levels and radiative rates for transitions in Ti X
Authors:
KM Aggarwal,
FP Keenan
Abstract:
We report calculations of energy levels, radiative rates, oscillator strengths and line strengths for transitions among the lowest 345 levels of Ti X. These include 146 levels of the $n \le$ 3 configurations and 86 of 3s$^2 4\ell$, 3s$^2 5\ell$ and 3s3p4$\ell$, plus some of the 3s$^2 6\ell$, 3p$^2 4\ell$ and 3s3p5$\ell$ levels. The general-purpose relativistic atomic structure package ({\sc grasp}…
▽ More
We report calculations of energy levels, radiative rates, oscillator strengths and line strengths for transitions among the lowest 345 levels of Ti X. These include 146 levels of the $n \le$ 3 configurations and 86 of 3s$^2 4\ell$, 3s$^2 5\ell$ and 3s3p4$\ell$, plus some of the 3s$^2 6\ell$, 3p$^2 4\ell$ and 3s3p5$\ell$ levels. The general-purpose relativistic atomic structure package ({\sc grasp}) and flexible atomic code ({\sc fac}) are adopted for the calculations. Radiative rates, oscillator strengths and line strengths are provided for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2) and magnetic quadrupole (M2) transitions among the 345 levels, although calculations have been performed for a much larger number of levels. Comparisons are made with existing results and the accuracy of the data is assessed. Additionally, lifetimes for all 345 levels are listed. Extensive comparisons of lifetimes are made for the lowest 40 levels, for which discrepancies with recent theoretical work are up to 30%. Discrepancies in lifetimes are even larger, up to a factor of four, for higher excited levels. Furthermore, the effect of large CI is found to be insignificant for both the energies and lifetimes for the lowest 40 levels of Ti X which belong to the 3s$^2$3p, 3s3p$^2$, 3s$^2$3d, 3p$^3$ and 3s3p3d configurations. However, the contribution of CI is more appreciable for the energy levels and radiative rates among higher excited levels. Our listed energy levels are estimated to be accurate to better than 1% (within 0.1 Ryd), whereas results for other parameters are probably accurate to better than 20%.
△ Less
Submitted 10 July, 2013;
originally announced July 2013.
-
Energy levels and radiative rates for transitions in Ti VI
Authors:
KM Aggarwal,
FP Keenan,
AZ Msezane
Abstract:
We report on calculations of energy levels, radiative rates, oscillator strengths, and line strengths for transitions among the lowest 253 levels of the (1s$^2$2s$^2$2p$^6$) 3s$^2$3p$^5$, 3s3p$^6$, 3s$^2$3p$^4$3d, 3s3p$^5$3d, 3s$^2$3p$^33d^2$, 3s$^2$3p$^4$4s, 3s$^2$3p$^4$4p and 3s$^2$3p$^4$4d configurations of Ti VI. The general-purpose relativistic atomic structure package ({\sc grasp}) and flexi…
▽ More
We report on calculations of energy levels, radiative rates, oscillator strengths, and line strengths for transitions among the lowest 253 levels of the (1s$^2$2s$^2$2p$^6$) 3s$^2$3p$^5$, 3s3p$^6$, 3s$^2$3p$^4$3d, 3s3p$^5$3d, 3s$^2$3p$^33d^2$, 3s$^2$3p$^4$4s, 3s$^2$3p$^4$4p and 3s$^2$3p$^4$4d configurations of Ti VI. The general-purpose relativistic atomic structure package ({\sc grasp}) and flexible atomic code ({\sc fac}) are adopted for the calculations. Radiative rates, oscillator strengths and line strengths are reported for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2) and magnetic quadrupole (M2) transitions among the 253 levels, although calculations have been performed for a much larger number of levels. Comparisons are made with existing available results and the accuracy of the data is assessed. Additionally, lifetimes for all 253 levels are listed, although comparisons with other theoretical results are limited to only 88 levels. Our energy levels are estimated to be accurate to better than 1% (within 0.03 Ryd), whereas results for other parameters are probably accurate to better than 20%. A reassessment of the energy level data on the NIST website for Ti VI is suggested.
△ Less
Submitted 9 July, 2013;
originally announced July 2013.
-
The effect of ionization on the populations of excited levels of C IV and C V in tokamak edge plasmas
Authors:
K D Lawson,
I H Coffey,
K M Aggarwal,
F P Keenan,
JET-EFDA Contributors
Abstract:
The main populating and depopulating mechanisms of the excited energy levels of ions in plasmas with densities <1023-1024 m-3 are electron collisional excitation from the ion's ground state and radiative decay, respectively, with the majority of the electron population being in the ground state of the ionization stage. Electron collisional ionization is predominately expected to take place from on…
▽ More
The main populating and depopulating mechanisms of the excited energy levels of ions in plasmas with densities <1023-1024 m-3 are electron collisional excitation from the ion's ground state and radiative decay, respectively, with the majority of the electron population being in the ground state of the ionization stage. Electron collisional ionization is predominately expected to take place from one ground state to that of the next higher ionization stage. However, the question arises as to whether, in some cases, ionization can also affect the excited level populations. This would apply particularly to those cases involving transient events such as impurity influxes in a laboratory plasma. An analysis of the importance of ionization in populating the excited levels of ions in plasmas typical of those found in the edge of tokamaks is undertaken for the C IV and C V ionization stages. The emphasis is on those energy levels giving rise to transitions of most use for diagnostic purposes. Carbon is chosen since it is an important contaminant of JET plasmas; it was the dominant low Z impurity before the installation of the ITER-like wall and is still present in the plasma after its installation. Direct electron collisional ionization both from and to excited levels is considered. Distorted-wave Flexible Atomic Code calculations are performed to generate the required ionization cross sections, due to a lack of atomic data in the literature.
△ Less
Submitted 13 May, 2013;
originally announced May 2013.
-
Energy levels, radiative rates and electron impact excitation rates for transitions in He-like Ga XXX, Ge XXXI, As XXXII, Se XXXIII and Br XXXIV
Authors:
Kanti M Aggarwal,
Francis P Keenan
Abstract:
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in He-like Ga XXX, Ge XXXI, As XXXII, Se XXXIII and Br XXXIV. The {\sc grasp} (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths, and subsequently the excitation ra…
▽ More
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in He-like Ga XXX, Ge XXXI, As XXXII, Se XXXIII and Br XXXIV. The {\sc grasp} (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths, and subsequently the excitation rates, the Dirac Atomic R-matrix Code ({\sc darc}) is used. Oscillator strengths, radiative rates and line strengths are reported for all E1, E2, M1 and M2 transitions among the lowest 49 levels of each ion. Additionally, theoretical lifetimes are provided for all 49 levels of the above five ions. Collision strengths are averaged over a Maxwellian velocity distribution and the effective collision strengths obtained listed over a wide temperature range up to 10$^{8}$ K. Comparisons are made with similar data obtained using the Flexible Atomic Code ({\sc fac}) to highlight the importance of resonances, included in calculations with {\sc darc}, in the determination of effective collision strengths. Discrepancies between the collision strengths from {\sc darc} and {\sc fac}, particularly for some forbidden transitions, are also discussed. Finally, discrepancies between the present results for effective collision strengths with the {\sc darc} code and earlier semi-relativistic $R$-matrix data are noted over a wide range of electron temperatures for many transitions in all ions.
△ Less
Submitted 13 March, 2013;
originally announced March 2013.
-
Assessment of atomic data: problems and solutions
Authors:
Km Aggarwal,
Fp Keenan
Abstract:
For the reliable analysis and modelling of astrophysical, laser-produced and fusion plasmas, atomic data are required for a number of parameters, including energy levels, radiative rates and electron impact excitation rates. Such data are desired for a range of elements (H to W) and their many ions. However, measurements of atomic data, mainly for radiative and excitation rates, are not feasible f…
▽ More
For the reliable analysis and modelling of astrophysical, laser-produced and fusion plasmas, atomic data are required for a number of parameters, including energy levels, radiative rates and electron impact excitation rates. Such data are desired for a range of elements (H to W) and their many ions. However, measurements of atomic data, mainly for radiative and excitation rates, are not feasible for many species and therefore calculations are needed. For some ions (such as of C, Fe and Kr) there are a variety of calculations available in the literature, but often they significantly differ from one another. Therefore, there is a great demand from the user community to have data `assessed' for accuracy so that they can be confidently applied to the modelling of plasmas. In this paper we highlight the difficulties in assessing atomic data and offer some solutions for improving the accuracy of calculated results.
△ Less
Submitted 14 January, 2013;
originally announced January 2013.
-
Energy levels, radiative rates and electron impact excitation rates for transitions in Be-like Ti XIX
Authors:
Km Aggarwal,
Fp Keenan
Abstract:
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in Be-like Ti XIX. The GRASP (General-purpose Relativistic Atomic Structure Package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code (DARC) is used…
▽ More
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in Be-like Ti XIX. The GRASP (General-purpose Relativistic Atomic Structure Package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code (DARC) is used. Oscillator strengths, radiative rates and line strengths are reported for all E1, E2, M1 and M2 transitions among the lowest 98 levels of the n <= 4 configurations. Additionally, theoretical lifetimes are listed for all 98 levels. Collision strengths are averaged over a Maxwellian velocity distribution and the effective collision strengths obtained listed over a wide temperature range up to 10**7.7 K. Comparisons are made with similar data obtained from the Flexible Atomic Code (FAC) to highlight the importance of resonances, included in calculations with DARC, in the determination of effective collision strengths. Discrepancies between the collision strengths from DARC and FAC, particularly for forbidden transitions, are also discussed.
△ Less
Submitted 13 September, 2012;
originally announced September 2012.
-
Energy levels, radiative rates and electron impact excitation rates for transitions in He-like Kr XXXV
Authors:
K. M. Aggarwal,
F. P. Keenan
Abstract:
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in He-like Kr XXXV. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code (DARC) is use…
▽ More
We report calculations of energy levels, radiative rates and electron impact excitation cross sections and rates for transitions in He-like Kr XXXV. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates. For determining the collision strengths and subsequently the excitation rates, the Dirac Atomic R-matrix Code (DARC) is used. Oscillator strengths, radiative rates and line strengths are reported for all E1, E2, M1, and M2 transitions among the lowest 49 levels. Additionally, theoretical lifetimes are listed for all 49 levels. Collision strengths are averaged over a Maxwellian velocity distribution and the effective collision strengths obtained listed over a wide temperature range up to 10**8.1 K. Comparisons are made with similar data obtained with the Flexible Atomic Code (FAC) to assess the accuracy of the results and to highlight the importance of resonances, included in calculations with DARC, in the determination of effective collision strengths. Differences between the collision strengths from DARC and FAC, particularly for forbidden transitions, are also discussed. Finally, discrepancies between the present results of effective collision strengths from the {\sc darc} code and earlier semi-relativistic $R$-matrix data are noted over a wide range of electron temperatures for many transitions of Kr XXXV.
△ Less
Submitted 27 July, 2012;
originally announced July 2012.
-
Energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12 <= Z <= 20
Authors:
K. M. Aggarwal,
F. P. Keenan
Abstract:
We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12 <= Z <= 20. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac atomic R-matrix code DARC is u…
▽ More
We report calculations of energy levels, radiative rates, and electron impact excitation rates for transitions in Li-like ions with 12 <= Z <= 20. The GRASP (general-purpose relativistic atomic structure package) is adopted for calculating energy levels and radiative rates, while for determining the collision strengths and subsequently the excitation rates, the Dirac atomic R-matrix code DARC is used. Oscillator strengths, radiative rates, and line strengths are reported for all E1, E2, M1, and M2 transitions among the lowest 24 levels of the Li-like ions considered. Collision strengths have been averaged over a Maxwellian velocity distribution, and the effective collision strengths obtained are reported over a wide temperature range up to 10$^{7.4}$ K. Additionally, lifetimes are also listed for all calculated levels of the above ions. Finally, extensive comparisons are made with available results in the literature, as well as with our parallel calculations for all parameters with the Flexible Atomic Code FAC in order to assess the accuracy of the reported results.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
How to Make an Atomic Blog in Your Own Kitchen. Summary of the Workshop: Uncertainties in Atomic Data and How They Propagate in Chemical Abundances
Authors:
Valentina Luridiana,
Jorge García-Rojas,
Kanti Aggarwal,
Manuel Bautista,
Maria Bergemann,
Franck Delahaye,
Giulio del Zanna,
Gary Ferland,
Karin Lind,
Arturo Manchado,
Claudio Mendoza,
Adal Mesa Delgado,
Manuel Núñez Díaz,
Richard A. Shaw,
Roger Wesson
Abstract:
This workshop brought together scientists (including atomic physicists, theoretical astrophysicists and astronomers) concerned with the completeness and accuracy of atomic data for astrophysical applications. The topics covered in the workshop included the evaluation of uncertainties in atomic data, the propagation of such uncertainties in chemical abundances, and the feedback between observations…
▽ More
This workshop brought together scientists (including atomic physicists, theoretical astrophysicists and astronomers) concerned with the completeness and accuracy of atomic data for astrophysical applications. The topics covered in the workshop included the evaluation of uncertainties in atomic data, the propagation of such uncertainties in chemical abundances, and the feedback between observations and calculations. On a different level, we also discussed communication issues such as how to ensure that atomic data are correctly understood and used, and which forum is the best one for a fluid interaction between all communities involved in the production and use of atomic data. This paper reports on the discussions held during the workshop and introduces AstroAtom, a blog created as a platform for timely and open discussions on the needs and concerns over atomic data, and their effects on astronomical research.
The complete proceedings will be published on http://astroatom.wordpress.com/.
△ Less
Submitted 9 October, 2011;
originally announced October 2011.
-
Highly Ionized Sodium X-ray Line Emission from the Solar Corona and the Abundance of Sodium
Authors:
K. J. H. Phillips,
K. M. Aggarwal,
E. Landi,
F. P. Keenan
Abstract:
{The \ion{Na}{x} X-ray lines between 10.9 and 11.2~Å have attracted little attention but are of interest since they enable an estimate of the coronal abundance of Na to be made. This is of great interest in the continuing debate on the nature of the FIP (first ionization potential) effect. } {Observations of the \ion{Na}{x} lines with the Solar Maximum Mission Flat Crystal Spectrometer and a rocke…
▽ More
{The \ion{Na}{x} X-ray lines between 10.9 and 11.2~Å have attracted little attention but are of interest since they enable an estimate of the coronal abundance of Na to be made. This is of great interest in the continuing debate on the nature of the FIP (first ionization potential) effect. } {Observations of the \ion{Na}{x} lines with the Solar Maximum Mission Flat Crystal Spectrometer and a rocket-borne X-ray spectrometer are used to measure the Na/Ne abundance ratio, i.e. the ratio of an element with very low FIP to one with high FIP.} {New atomic data are used to generate synthetic spectra which are compared with the observations, with temperature and the Na/Ne abundance ratio as free parameters.} {Temperature estimates from the observations indicate that the line emission is principally from non-flaring active regions, and that the Na/Ne abundance ratio is $0.07 \pm 50$\%.} {The Na/Ne abundance ratio is close to a coronal value for which the abundances of low-FIP elements (FIP $< 10$~eV) are enhanced by a factor of 3 to 4 over those found in the photosphere. For low-temperature ($T_e \leqslant 1.5$~MK) spectra, the presence of \ion{Fe}{xvii} lines requires that either a higher-temperature component is present or a revision of ionization or recombination rates is needed. }
△ Less
Submitted 24 May, 2010;
originally announced May 2010.
-
Emission lines of Fe XI in the 257--407 A wavelength region observed in solar spectra from EIS/Hinode and SERTS
Authors:
F. P. Keenan,
R. O. Milligan,
D. B. Jess,
K. M. Aggarwal,
M. Mathioudakis,
R. J. Thomas,
J. W. Brosius,
J. M. Davila
Abstract:
Theoretical emission-line ratios involving Fe XI transitions in the 257-407 A wavelength range are derived using fully relativistic calculations of radiative rates and electron impact excitation cross sections. These are subsequently compared with both long wavelength channel Extreme-Ultraviolet Imaging Spectrometer (EIS) spectra from the Hinode satellite (covering 245-291 A), and first-order ob…
▽ More
Theoretical emission-line ratios involving Fe XI transitions in the 257-407 A wavelength range are derived using fully relativistic calculations of radiative rates and electron impact excitation cross sections. These are subsequently compared with both long wavelength channel Extreme-Ultraviolet Imaging Spectrometer (EIS) spectra from the Hinode satellite (covering 245-291 A), and first-order observations (235-449 A) obtained by the Solar Extreme-ultraviolet Research Telescope and Spectrograph (SERTS). The 266.39, 266.60 and 276.36 A lines of Fe XI are detected in two EIS spectra, confirming earlier identifications of these features, and 276.36 A is found to provide an electron density diagnostic when ratioed against the 257.55 A transition. Agreement between theory and observation is found to be generally good for the SERTS data sets, with discrepancies normally being due to known line blends, while the 257.55 A feature is detected for the first time in SERTS spectra. The most useful Fe XI electron density diagnostic is found to be the 308.54/352.67 intensity ratio, which varies by a factor of 8.4 between N_e = 10^8 and 10^11 cm^-3, while showing little temperature sensitivity. However, the 349.04/352.67 ratio potentially provides a superior diagnostic, as it involves lines which are closer in wavelength, and varies by a factor of 14.7 between N_e = 10^8 and 10^11 cm^-3. Unfortunately, the 349.04 A line is relatively weak, and also blended with the second-order Fe X 174.52 A feature, unless the first-order instrument response is enhanced.
△ Less
Submitted 20 January, 2010;
originally announced January 2010.
-
Ultraviolet and extreme-ultraviolet line ratio diagnostics for O IV
Authors:
F P Keenan,
P J Crockett,
K M Aggarwal,
D B Jess,
M Mathioudakis
Abstract:
Aims: We generate theoretical ultraviolet and extreme-ultraviolet emission line ratios for O IV and show their strong versatility as electron temperature and density diagnostics for astrophysical plasmas. Methods: Recent fully relativistic calculations of radiative rates and electron impact excitation cross sections for O IV, supplemented with earlier data for A-values and proton excitation rate…
▽ More
Aims: We generate theoretical ultraviolet and extreme-ultraviolet emission line ratios for O IV and show their strong versatility as electron temperature and density diagnostics for astrophysical plasmas. Methods: Recent fully relativistic calculations of radiative rates and electron impact excitation cross sections for O IV, supplemented with earlier data for A-values and proton excitation rates, are used to derive theoretical O IV line intensity ratios for a wide range of electron temperatures and densities. Results: Diagnostic line ratios involving ultraviolet or extreme-ultraviolet transitions in O IV are presented, that are applicable to a wide variety of astrophysical plasmas ranging from low density gaseous nebulae to the densest solar and stellar flares. Comparisons with observational data, where available, show good agreement between theory and experiment, providing support for the accuracy of the diagnostics. However, diagnostics are also presented involving lines that are blended in existing astronomical spectra, in the hope this might encourage further observational studies at higher spectral resolution.
△ Less
Submitted 15 January, 2009;
originally announced January 2009.
-
Emission lines of Fe X in active region spectra obtained with the Solar Extreme-ultraviolet Research Telescope and Spectrograph
Authors:
F P Keenan,
D B Jess,
K M Aggarwal,
R J Thomas,
J W Brosius,
J M Davila
Abstract:
Fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe X are used to derive theoretical emission-line ratios involving transitions in the 174-366 A wavelength range. A comparison of these with solar active region observations obtained during the 1989 and 1995 flights of the Solar Extreme-ultraviolet Research Telescope and Spectrograph (SERTS) reve…
▽ More
Fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe X are used to derive theoretical emission-line ratios involving transitions in the 174-366 A wavelength range. A comparison of these with solar active region observations obtained during the 1989 and 1995 flights of the Solar Extreme-ultraviolet Research Telescope and Spectrograph (SERTS) reveals generally very good agreement between theory and experiment. Several Fe X emission features are detected for the first time in SERTS spectra, while the transition at 195.32 A is identified for the first time (to our knowledge) in an astronomical source. The most useful Fe X electron density diagnostic line ratios are assessed to be 175.27/174.53 and 175.27/177.24, which both involve lines close in wavelength and free from blends, vary by factors of 13 between Ne = 1E8 and 1E13 cm-3, and yet show little temperature sensitivity. Should these lines not be available, then the 257.25/345.74 ratio may be employed to determine Ne, although this requires an accurate evaluation of the instrument intensity calibration over a relatively large wavelength range. However, if the weak 324.73 A line of Fe X is reliably detected, the use of 324.73/345.74 or 257.25/324.73 is recommended over 257.25/345.74.
△ Less
Submitted 20 June, 2008;
originally announced June 2008.
-
An investigation of Fe XVI emission lines in solar and stellar EUV and soft X-ray spectra
Authors:
F. P. Keenan,
J. J. Drake,
K. M. Aggarwal
Abstract:
New fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe XVI are used to determine theoretical emission-line ratios applicable to the 251 - 361 A and 32 - 77 A portions of the extreme-ultraviolet (EUV) and soft X-ray spectral regions, respectively. A comparison of the EUV results with observations from the Solar Extreme-Ultraviolet Research Tele…
▽ More
New fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe XVI are used to determine theoretical emission-line ratios applicable to the 251 - 361 A and 32 - 77 A portions of the extreme-ultraviolet (EUV) and soft X-ray spectral regions, respectively. A comparison of the EUV results with observations from the Solar Extreme-Ultraviolet Research Telescope and Spectrograph (SERTS) reveals excellent agreement between theory and experiment. However, for emission lines in the 32 - 49 A portion of the soft X-ray spectral region, there are large discrepancies between theory and measurement for both a solar flare spectrum obtained with the X-Ray Spectrometer/Spectrograph Telescope (XSST) and observations of Capella from the Low Energy Transmission Grating Spectrometer (LETGS) on the Chandra X-ray Observatory. These are probably due to blending in the solar flare and Capella data from both first order lines and from shorter wavelength transitions detected in second and third order. By contrast, there is very good agreement between our theoretical results and the XSST and LETGS observations in the 50 - 77 A wavelength range, contrary to previous results. In particular, there is no evidence that the Fe XVI emission from the XSST flare arises from plasma at a much higher temperature than that expected for Fe XVI in ionization equilibrium, as suggested by earlier work.
△ Less
Submitted 20 August, 2007;
originally announced August 2007.
-
Fe XIII emission lines in active region spectra obtained with the Solar Extreme-Ultraviolet Research Telescope and Spectrograph
Authors:
F P Keenan,
D B Jess,
K M Aggarwal,
R J Thomas,
J W Brosius,
J M Davila
Abstract:
Recent fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe {\sc xiii} are used to generate emission-line ratios involving 3s$^{2}$3p$^{2}$--3s3p$^{3}$ and 3s$^{2}$3p$^{2}$--3s$^{2}$3p3d transitions in the 170--225 Åand 235--450 Åwavelength ranges covered by the Solar Extreme-Ultraviolet Research Telescope and Spectrograph (SERTS). A comparison…
▽ More
Recent fully relativistic calculations of radiative rates and electron impact excitation cross sections for Fe {\sc xiii} are used to generate emission-line ratios involving 3s$^{2}$3p$^{2}$--3s3p$^{3}$ and 3s$^{2}$3p$^{2}$--3s$^{2}$3p3d transitions in the 170--225 Åand 235--450 Åwavelength ranges covered by the Solar Extreme-Ultraviolet Research Telescope and Spectrograph (SERTS). A comparison of these line ratios with SERTS active region observations from rocket flights in 1989 and 1995 reveals generally very good agreement between theory and experiment. Several new Fe {\sc xiii} emission features are identified, at wavelengths of 203.79, 259.94, 288.56 and 290.81 Å. However, major discrepancies between theory and observation remain for several Fe {\sc xiii} transitions, as previously found by Landi (2002) and others, which cannot be explained by blending. Errors in the adopted atomic data appear to be the most likely explanation, in particular for transitions which have 3s$^{2}$3p3d $^{1}$D$_{2}$ as their upper level. The most useful Fe {\sc xiii} electron density diagnostics in the SERTS spectral regions are assessed, in terms of the line pairs involved being (i) apparently free of atomic physics problems and blends, (ii) close in wavelength to reduce the effects of possible errors in the instrumental intensity calibration, and (iii) very sensitive to changes in N$_{e}$ over the range 10$^{8}$--10$^{11}$ cm$^{-3}$. It is concluded that the ratios which best satisfy these conditions are 200.03/202.04 and 203.17/202.04 for the 170--225 Åwavelength region, and 348.18/320.80, 348.18/368.16, 359.64/348.18 and 359.83/368.16 for 235--450 Å.
△ Less
Submitted 18 December, 2006;
originally announced December 2006.
-
Soft X-ray emission lines of Fe XV in solar flare observations and the Chandra spectrum of Capella
Authors:
F. P. Keenan,
J. J. Drake,
S. Chung,
N. S. Brickhouse,
K. M. Aggarwal,
A. Z. Msezane,
R. S. I. Ryans,
D. S. Bloomfield
Abstract:
Recent calculations of atomic data for Fe XV have been used to generate theoretical line ratios involving n = 3-4 transitions in the soft X-ray spectral region (52-83 A), for a wide range of electron temperatures and densities applicable to solar and stellar coronal plasmas. A comparison of these with solar flare observations from a rocket-borne spectrograph (XSST) reveals generally good agreeme…
▽ More
Recent calculations of atomic data for Fe XV have been used to generate theoretical line ratios involving n = 3-4 transitions in the soft X-ray spectral region (52-83 A), for a wide range of electron temperatures and densities applicable to solar and stellar coronal plasmas. A comparison of these with solar flare observations from a rocket-borne spectrograph (XSST) reveals generally good agreement between theory and experiment. In particular, the 82.76 A emission line in the XSST spectrum is identified, for the first time to our knowledge in an astrophysical source. Most of the Fe XV transitions which are blended have had the species responsible clearly identified, although there remain a few instances where this has not been possible. The line ratio calculations are also compared with a co-added spectrum of Capella obtained with the Chandra satellite, which is probably the highest signal-to-noise observation achieved for a stellar source in the 25-175 A soft X-ray region. Good agreement is found between theory and experiment, indicating that the Fe XV lines are reliably detected in Chandra spectra, and hence may be employed as diagnostics to determine the temperature and/or density of the emitting plasma. However the line blending in the Chandra data is such that individual emission lines are difficult to measure accurately, and fluxes may only be reliably determined via detailed profile fitting of the observations. The co-added Capella spectrum is made available to hopefully encourage further exploration of the soft X-ray region in astronomical sources.
△ Less
Submitted 26 January, 2006;
originally announced January 2006.
-
An investigation of Fe XV emission lines in solar flare spectra
Authors:
F P Keenan,
K M Aggarwal,
D S Bloomfield,
A Z Msezane,
K G Widing
Abstract:
Previously, large discrepancies have been found between theory and observation for Fe XV emission line ratios in solar flare spectra covering the 224-327 A wavelength range, obtained by the Naval Research Laboratory's S082A instrument on board Skylab. These discrepancies have been attributed to either errors in the adopted atomic data or the presence of additional atomic processes not included i…
▽ More
Previously, large discrepancies have been found between theory and observation for Fe XV emission line ratios in solar flare spectra covering the 224-327 A wavelength range, obtained by the Naval Research Laboratory's S082A instrument on board Skylab. These discrepancies have been attributed to either errors in the adopted atomic data or the presence of additional atomic processes not included in the modelling, such as fluorescence. However our analysis of these plus other S082A flare observations (the latter containing Fe XV transitions between 321-482 A), performed using the most recent Fe XV atomic physics calculations in conjunction with a CHIANTI synthetic flare spectrum, indicate that blending of the lines is primarily responsible for the discrepancies. As a result, most Fe XV lines cannot be employed as electron density diagnostics for solar flares, at least at the spectral resolution of S082A and similar instruments (i.e. ~ 0.1 A). An exception is the intensity ratio I(321.8 A)/I(327.0 A), which appears to provide good estimates of the electron density at this spectral resolution.
△ Less
Submitted 22 December, 2005;
originally announced December 2005.
-
Fe XI emission lines in a high resolution extreme ultraviolet spectrum obtained by SERTS
Authors:
F. P. Keenan,
K. M. Aggarwal,
R. S. I. Ryans,
R. O. Milligan,
D. S. Bloomfield,
J. W. Brosius,
J. M. Davila,
R. J. Thomas
Abstract:
New calculations of radiative rates and electron impact excitation cross sections for Fe XI are used to derive emission line intensity ratios involving 3s^23p^4 - 3s^23p^33d transitions in the 180-223 A wavelength range. These ratios are subsequently compared with observations of a solar active region, obtained during the 1995 flight Solar EUV Research Telescope and Spectrograph (SERTS). The ver…
▽ More
New calculations of radiative rates and electron impact excitation cross sections for Fe XI are used to derive emission line intensity ratios involving 3s^23p^4 - 3s^23p^33d transitions in the 180-223 A wavelength range. These ratios are subsequently compared with observations of a solar active region, obtained during the 1995 flight Solar EUV Research Telescope and Spectrograph (SERTS). The version of SERTS flown in 1995 incorporated a multilayer grating that enhanced the instrumental sensitivity for features in the 170 - 225 A wavelength range, observed in second-order between 340 and 450 A. This enhancement led to the detection of many emission lines not seen on previous SERTS flights, which were measured with the highest spectral resolution (0.03 A) ever achieved for spatially resolved active region spectra in this wavelength range. However, even at this high spectral resolution, several of the Fe XI lines are found to be blended, although the sources of the blends are identified in the majority of cases. The most useful Fe XI electron density diagnostic line intensity ratio is I(184.80 A)/I(188.21 A). This ratio involves lines close in wavelength and free from blends, and which varies by a factor of 11.7 between N_e = 10^9 and 10^11 cm^-3, yet shows little temperature sensitivity. An unknown line in the SERTS spectrum at 189.00 A is found to be due to Fe XI, the first time (to our knowledge) this feature has been identified in the solar spectrum. Similarly, there are new identifications of the Fe XI 192.88, 198.56 and 202.42 A features, although the latter two are blended with S VIII/Fe XII and Fe XIII, respectively.
△ Less
Submitted 5 April, 2005;
originally announced April 2005.