-
A nanoporous capacitive electrochemical ratchet for continuous ion separations
Authors:
Rylan J. Kautz,
Alon Herman,
Ethan J. Heffernan,
Camila Muñetón,
David Larson,
Joel W. Ager III,
Francesca M. Toma,
Shane Ardo,
Gideon Segev
Abstract:
Directed ion transport in liquid electrolyte solutions underlies numerous phenomena in nature and industry including neuronal signaling, photosynthesis and respiration, electrodialysis for desalination, and recovery of critical materials. Here, we report the first demonstration of an ion pump that drives ions in aqueous electrolytes against a force using a capacitive ratchet mechanism. Our ratchet…
▽ More
Directed ion transport in liquid electrolyte solutions underlies numerous phenomena in nature and industry including neuronal signaling, photosynthesis and respiration, electrodialysis for desalination, and recovery of critical materials. Here, we report the first demonstration of an ion pump that drives ions in aqueous electrolytes against a force using a capacitive ratchet mechanism. Our ratchet-based ion pumps utilize the non-linear capacitive nature of electric double layers for symmetry breaking which drives a net time-averaged ion flux in response to a time varying input signal. Since the devices are driven by a non-linear charging and discharging of double layers, they do not require redox reactions for continual operation. Ratchet-based ion pumps were fabricated by depositing thin gold layers on the two surfaces of anodized alumina wafers, forming nanoporous capacitor-like structures. Pum** occurs when a wafer is placed between two compartments of aqueous electrolyte and the electric potential across it is modulated. In response to various input signals, persistent ionic voltages and sustained currents were observed, consistent with net unidirectional ion transport, even though conduction through the membrane was non-rectifying. The generated ionic power was used in conjunction with an additional shunt pathway to demonstrate electrolyte demixing.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
Elucidating the Mechanism of Large Phosphate Molecule Intercalation Through Graphene Heterointerfaces
Authors:
Jiayun Liang,
Ke Ma,
Xiao Zhao,
Guanyu Lu,
Jake V. Riffle,
Carmen Andrei,
Chengye Dong,
Turker Furkan,
Siavash Rajabpour,
Rajiv Ramanujam Prabhakar,
Joshua A. Robinson,
Magdaleno R. Vasquez Jr.,
Quang Thang Trinh,
Joel W. Ager,
Miquel Salmeron,
Shaul Aloni,
Joshua D. Caldwell,
Shawna M. Hollen,
Hans A. Bechtel,
Nabil Bassim,
Matthew P. Sherburne,
Zakaria Y. Al Balushi
Abstract:
Intercalation is a process of inserting chemical species into the heterointerfaces of two-dimensional (2D) layered materials. While much research has focused on intercalating metals and small gas molecules into graphene, the intercalation of larger molecules through the basal plane of graphene remains highly unexplored. In this work, we present a new mechanism for intercalating large molecules thr…
▽ More
Intercalation is a process of inserting chemical species into the heterointerfaces of two-dimensional (2D) layered materials. While much research has focused on intercalating metals and small gas molecules into graphene, the intercalation of larger molecules through the basal plane of graphene remains highly unexplored. In this work, we present a new mechanism for intercalating large molecules through monolayer graphene to form confined oxide materials at the graphene-substrate heterointerface. We investigate the intercalation of phosphorus pentoxide (P2O5) molecules directly from the vapor phase and confirm the formation of confined P2O5 at the graphene heterointerface using various techniques. Density functional theory (DFT) corroborate the experimental results and reveal the intercalation mechanism, whereby P2O5 dissociates into small fragments catalyzed by defects in the graphene that then permeates through lattice defects and reacts at the heterointerface to form P2O5. This process can also be used to form new confined metal phosphates (e.g., 2D InPO4). While the focus of this study is on P2O5 intercalation, the possibility of intercalation from pre-dissociated molecules catalyzed by defects in graphene may exist for other types of molecules as well. This study is a significant milestone in advancing our understanding of intercalation routes of large molecules via the basal plane of graphene, as well as heterointerface chemical reactions leading to the formation of distinctive confined complex oxide compounds.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Energy efficient ethanol concentration method for scalable CO$_2$ electrolysis
Authors:
Magda Barecka,
DS Pritika Dameni,
Marsha Zakir Muhamad,
Joel Ager,
Alexei Lapkin
Abstract:
Vacuum membrane distillation efficiently concentrates dilute ethanol streams produced by CO$_2$ electrolysis (CO2R), yielding up to ~40 wt.% ethanol in pure water. Our results allow for a more precise estimation of energy inputs to the separation processes and for the reformulation of CO2R technology development goals.
Vacuum membrane distillation efficiently concentrates dilute ethanol streams produced by CO$_2$ electrolysis (CO2R), yielding up to ~40 wt.% ethanol in pure water. Our results allow for a more precise estimation of energy inputs to the separation processes and for the reformulation of CO2R technology development goals.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
Possible Origin of Preformed Hole Pairs and Superconductivity in Cuprates
Authors:
Shu Wang,
Joel W. Ager,
Wladek Walukiewicz
Abstract:
This paper addresses the long standing and controversial issue of the origin of superconductivity in cuprates. Their superconductivity can be attributed to amphoteric defects associated with vacancy sites in copper oxide planes. A local defect lattice relaxation results in a negative-$U$ energy binding two holes on amphoteric defects in the donor configuration that act as preformed boson pair. The…
▽ More
This paper addresses the long standing and controversial issue of the origin of superconductivity in cuprates. Their superconductivity can be attributed to amphoteric defects associated with vacancy sites in copper oxide planes. A local defect lattice relaxation results in a negative-$U$ energy binding two holes on amphoteric defects in the donor configuration that act as preformed boson pair. Thermodynamic equilibrium between defects in the donor and acceptor configurations stabilizes Fermi energy at the amphoteric defect charge transition state assuring resonant coupling between free holes and the localized hole pairs. Model calculations show that the critical temperature is primarily determined by the density of the amphoteric defects in the donor configuration, explaining the ubiquity of dome-like dependence of the critical temperature on the do** as well as its universal dependence on the superfluid density. Intentional do** with chemical acceptors or donors is neither necessary nor sufficient condition for superconductivity that is fully determined by the amphoteric defects whose concentration can be controlled by crystal nonstoichiometry. The only role of chemical do** is changing the balance between concentrations of amphoteric defects in the donor and acceptor configurations resulting in an increase of the superfluid density and thus also the critical temperature for acceptor and a decrease for donor do**. This accounts for the experimentally observed distinct asymmetry between the dome structures for the chemical do** with acceptors and donors. The unusual sensitivity of the critical temperature to external perturbations is explained by the resonant nature of the coupling between free holes and preformed hole pairs. The work has broader implications as it could be applicable to other superconductors with dome-like dependence of the critical temperature on do**.
△ Less
Submitted 8 February, 2022;
originally announced February 2022.
-
Ratchet based ion pumps for selective ion separations
Authors:
Alon Herman,
Joel W. Ager,
Shane Ardo,
Gideon Segev
Abstract:
The development of a selective, membrane-based ion separation technology may prove useful in a wide range of applications such as water treatment, battery recycling, ion specific chemical sensors, extraction of valuable metals from sea water, and bio-medical devices. In this work we show that a flashing ratchet mechanism can be used for high precision ion separation. The suggested ratchet-based io…
▽ More
The development of a selective, membrane-based ion separation technology may prove useful in a wide range of applications such as water treatment, battery recycling, ion specific chemical sensors, extraction of valuable metals from sea water, and bio-medical devices. In this work we show that a flashing ratchet mechanism can be used for high precision ion separation. The suggested ratchet-based ion pumps utilize a unique feature of ratchets, the frequency dependent current reversals, to drive ions with the same charge but different diffusion coefficients in opposite directions. We show that for the prevalent ions in water, ions with a relative diffusion coefficient difference as small as 1% can be separated by driving them in opposite directions with a velocity difference as high as 1.2 mm/s. Since the pum** properties of the ratchet are determined by an electric input signal, the proposed ion pumps can pave the way for simple large-scale, fit-to-purpose selective ion separation systems.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Towards an accelerated decarbonization of chemical industry by electrolysis
Authors:
Magda H. Barecka,
Joel W. Ager
Abstract:
The transition towards carbon-neutral chemical production is challenging due to the fundamental reliance of the chemical sector on petrochemical feedstocks. Electrolysis-based manufacturing, powered by renewables, is a rapidly evolving technology that might be capable of drastically reducing CO2 emissions from the chemical sector. However, will it be possible to scale up electrolysis systems to th…
▽ More
The transition towards carbon-neutral chemical production is challenging due to the fundamental reliance of the chemical sector on petrochemical feedstocks. Electrolysis-based manufacturing, powered by renewables, is a rapidly evolving technology that might be capable of drastically reducing CO2 emissions from the chemical sector. However, will it be possible to scale up electrolysis systems to the extent necessary to entirely decarbonize all chemical plants? Applying a forward-looking scenario, this perspective estimates how much energy will be needed to power full-scale electrolysis based chemical manufacturing by 2050. A significant gap is identified between the currently planned renewable energy expansion and the energy input necessary to electrify the chemical production: at minimum, the energy required for production of hydrogen and electrolysis of CO2 corresponds to > 50% of all renewable energy that is planned to be available. To cover this gap, strategies enabling a meaningful reduction of the energy input to electrolysis are being discussed from the perspective of both a single electrolysis system and an integrated electro-plant. Several scale-up oriented research priorities are formulated to underpin timely development and commercial availability of described technologies, as well as to explore synergies and support further growth of the renewable energy sector, essential to realize described paradigm shift in chemical manufacturing.
△ Less
Submitted 7 June, 2022; v1 submitted 7 January, 2022;
originally announced January 2022.
-
Charge Carrier Transport in Iron Pyrite Thin Films: Disorder Induced Variable Range Hop**
Authors:
Sudhanshu Shukla,
Sinu Mathew,
Hwan Sung Choe,
Manjusha Chugh,
Thomas D. Kuhne,
Hossein Mirhosseini,
Xiong Qihua,
Junqiao Wu,
Thirumalai Venkatesan,
Thirumany Sritharan,
Joel W. Ager
Abstract:
The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin films prepared by three different methods. Films have a high hole density and low mobility regardless of the method used for their preparation. The charge trans…
▽ More
The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin films prepared by three different methods. Films have a high hole density and low mobility regardless of the method used for their preparation. The charge transport mechanism is determined to be nearest neighbour hop** (NNH) at near room temperature with Mott-type variable range hop** (VRH) of holes via localized states occurring at lower temperatures. Density functional theory (DFT) predicts that sulfur vacancy induced localized defect states will be situated within the band gap with the charge remaining localized around the defect. The data indicate that the electronic properties including hop** transport in pyrite thin films can be correlated to sulfur vacancy related defect. The results provide insights on electronic properties of pyrite thin films and its implications for charge transport
△ Less
Submitted 20 June, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Economically viable CO2 electroreduction embedded within ethylene oxide manufacturing
Authors:
Magda H. Barecka,
Joel W. Ager,
Alexei A. Lapkin
Abstract:
Electrochemical conversion of CO2 (CO2R) into fuels and chemicals can both reduce CO2 emissions and allow for clean manufacturing in the scenario of significant expansion of renewable power generation. However, large-scale process deployment is currently limited by unfavourable process economics resulting from significant up- and down-stream costs for obtaining pure CO2, separation of reaction pro…
▽ More
Electrochemical conversion of CO2 (CO2R) into fuels and chemicals can both reduce CO2 emissions and allow for clean manufacturing in the scenario of significant expansion of renewable power generation. However, large-scale process deployment is currently limited by unfavourable process economics resulting from significant up- and down-stream costs for obtaining pure CO2, separation of reaction products and increased logistical effort. We have discovered a method for economically viable recycling of waste CO2 that addresses these challenges. Our approach is based on integration of a CO2R unit into an existing manufacturing process: ethylene oxide (EO) production, which emits CO2 as a by-product. The standard EO process separates waste CO2 from gas stream, hence the substrate for electroreduction is available at an EO plant at no additional cost. CO2 can be converted into an ethylene-rich stream and recycled on-site back to the EO reactor, which uses ethylene as a raw material, and also the anode product (oxygen) can be simultaneously valorized for the EO production reaction. If powered by a renewable electricity source, the process will significantly (ca. 80%) reduce the CO2 emissions of an EO manufacturing plant. A sensitivity analysis shows that the recycling approach can be economically viable in the short term and that its payback time could be as low as 1-2 years in the regions with higher carbon taxes and/or with access to low-cost electricity sources.
△ Less
Submitted 6 December, 2020;
originally announced December 2020.
-
The Bright Side and the Dark Side of Hybrid Organic Inorganic Perovskites
Authors:
Wladek Walukiewicz,
Shu Wang,
Xinchun Wu,
Rundong Li,
Matthew P. Sherburne,
Bo Wu,
Tze Chien Sun,
Joel W. Ager,
Mark D. Asta
Abstract:
The previously developed bistable amphoteric native defect (BAND) model is used for a comprehensive explanation of the unique photophysical properties and for understanding the remarkable performance of perovskites as photovoltaic materials. It is shown that the amphoteric defects in donor (acceptor) configuration capture a fraction of photoexcited electrons (holes) dividing them into two groups:…
▽ More
The previously developed bistable amphoteric native defect (BAND) model is used for a comprehensive explanation of the unique photophysical properties and for understanding the remarkable performance of perovskites as photovoltaic materials. It is shown that the amphoteric defects in donor (acceptor) configuration capture a fraction of photoexcited electrons (holes) dividing them into two groups: higher energy bright and lower energy dark electrons (holes). The spatial separation of the dark electrons and the dark holes and the k-space separation of the bright and the dark charge carriers reduce electron hole recombination rates, emulating the properties of an ideal photovoltaic material with a balanced, spatially separated transport of electrons and holes. The BAND model also offers a straightforward explanation for the exceptional insensitivity of the photovoltaic performance of polycrystalline perovskite films to structural and optical inhomogeneities. The blue-shifted radiative recombination of bright electrons and holes results in a large anti-Stokes effect that provides a quantitative explanation for the spectral dependence of the laser cooling effect measured in perovskite platelets.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Electrical suppression of all nonradiative recombination pathways in monolayer semiconductors
Authors:
Der-Hsien Lien,
Shiekh Zia Uddin,
Matthew Yeh,
Matin Amani,
Hyung** Kim,
Joel W. Ager III,
Eli Yablonovitch,
Ali Javey
Abstract:
Defects in conventional semiconductors substantially lower the photoluminescence (PL) quantum yield (QY), a key metric of optoelectronic performance that directly dictates the maximum device efficiency. Two-dimensional (2D) transition metal dichalcogenides (TMDCs), such as monolayer MoS2, often exhibit low PL QY for as-processed samples, which has typically been attributed to a large native defect…
▽ More
Defects in conventional semiconductors substantially lower the photoluminescence (PL) quantum yield (QY), a key metric of optoelectronic performance that directly dictates the maximum device efficiency. Two-dimensional (2D) transition metal dichalcogenides (TMDCs), such as monolayer MoS2, often exhibit low PL QY for as-processed samples, which has typically been attributed to a large native defect density. We show that the PL QY of as-processed MoS2 and WS2 monolayers reaches near-unity when they are made intrinsic by electrostatic do**, without any chemical passivation. Surprisingly, neutral exciton recombination is entirely radiative even in the presence of a high native defect density. This finding enables TMDC monolayers for optoelectronic device applications as the stringent requirement of low defect density is eased.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
Dynamical decoupling of interacting dipolar spin ensembles
Authors:
Evan S. Petersen,
A. M. Tyryshkin,
K. M. Itoh,
Joel W. Ager,
H. Riemann,
N. V. Abrosimov,
P. Becker,
H. -J. Pohl,
M. L. W. Thewalt,
S. A. Lyon
Abstract:
We demonstrate that CPMG and XYXY decoupling sequences with non-ideal $π$ pulses can reduce dipolar interactions between spins of the same species in solids. Our simulations of pulsed electron spin resonance (ESR) experiments show that $π$ rotations with small ($<$~10\%) imperfections refocus instantaneous diffusion. Here, the intractable N-body problem of interacting dipoles is approximated by th…
▽ More
We demonstrate that CPMG and XYXY decoupling sequences with non-ideal $π$ pulses can reduce dipolar interactions between spins of the same species in solids. Our simulations of pulsed electron spin resonance (ESR) experiments show that $π$ rotations with small ($<$~10\%) imperfections refocus instantaneous diffusion. Here, the intractable N-body problem of interacting dipoles is approximated by the average evolution of a single spin in a changing mean field. These calculations agree well with experiments and do not require powerful hardware. Our results add to past attempts to explain similar phenomena in solid state nuclear magnetic resonance (NMR). Although the fundamental physics of NMR are similar to ESR, the larger linewidths in ESR and stronger dipolar interactions between electron spins compared to nuclear spins preclude drawing conclusions from NMR studies alone. For bulk spins, we also find that using XYXY results in less inflation of the deduced echo decay times as compared to decays obtained with CPMG.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Pressure-Temperature Phase Diagram of Vanadium Dioxide
Authors:
Yabin Chen,
Shuai Zhang,
Feng Ke,
Changhyun Ko,
Sangwook Lee,
Kai Liu,
Bin Chen,
Joel W. Ager,
Raymond Jeanloz,
Volker Eyert,
Junqiao Wu
Abstract:
The complexity of strongly correlated electron physics in vanadium dioxide is exemplified as its rich phase diagrams of all kinds, which in turn shed light on the mechanisms behind its various phase transitions. In this work, we map out the hydrostatic pressure - temperature phase diagram of vanadium dioxide nanobeams by independently varying pressure and temperature with a diamond anvil cell. In…
▽ More
The complexity of strongly correlated electron physics in vanadium dioxide is exemplified as its rich phase diagrams of all kinds, which in turn shed light on the mechanisms behind its various phase transitions. In this work, we map out the hydrostatic pressure - temperature phase diagram of vanadium dioxide nanobeams by independently varying pressure and temperature with a diamond anvil cell. In addition to the well-known insulating M1 (monoclinic) and metallic R (tetragonal) phases, the diagram identifies the existence at high pressures of the insulating M1' (monoclinic, more conductive than M1) phase, and two metallic phases of X (monoclinic) and O (orthorhombic, at high temperature only). Systematic optical and electrical measurements combined with density functional calculations allow us to delineate their phase boundaries as well as reveal some basic features of the transitions.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Pressurizing Field-Effect Transistors of Few-Layer MoS2 in a Diamond Anvil Cell
Authors:
Yabin Chen,
Feng Ke,
Penghong Ci,
Changhyun Ko,
Taegyun Park,
Sahar Saremi,
Huili Liu,
Yeonbae Lee,
Joonki Suh,
Lane W. Martin,
Joel W. Ager,
Bin Chen,
Junqiao Wu
Abstract:
Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic degree of freedom of functional materials via, for example, the field-effect transistor (FET) configuration. Combining these two orthogonal approaches would allow…
▽ More
Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic degree of freedom of functional materials via, for example, the field-effect transistor (FET) configuration. Combining these two orthogonal approaches would allow discovery of new physical properties and phases going beyond the known phase space. Such experiments are, however, technically challenging and have not been demonstrated. Herein, we report a feasible strategy to prepare and measure FETs in a DAC by lithographically patterning the nanodevices onto the diamond culet. Multiple-terminal FETs were fabricated in the DAC using few-layer MoS2 and BN as the channel semiconductor and dielectric layer, respectively. It is found that the mobility, conductance, carrier concentration, and contact conductance of MoS2 can all be significantly enhanced with pressure. We expect that the approach could enable unprecedented ways to explore new phases and properties of materials under coupled mechano-electrostatic modulation.
△ Less
Submitted 2 October, 2016;
originally announced October 2016.
-
Compliant substrate epitaxy: Au on MoS$_2$
Authors:
Yuzhi Zhou,
Daisuke Kiriya,
Eugene E. Haller,
Joel W. Ager III,
Ali Javey,
Daryl C. Chrzan
Abstract:
The epitaxial growth of {111} oriented Au on MoS$_2$ is well documented despite the large lattice mismatch (~8% biaxial strain), and the fact that a Au {001} orientation results in much less elastic strain. An analysis based on density functional and linear elasticity theories reveals that the {111} orientation is stabilized by a combination of favorable surface and interfacial contributions to th…
▽ More
The epitaxial growth of {111} oriented Au on MoS$_2$ is well documented despite the large lattice mismatch (~8% biaxial strain), and the fact that a Au {001} orientation results in much less elastic strain. An analysis based on density functional and linear elasticity theories reveals that the {111} orientation is stabilized by a combination of favorable surface and interfacial contributions to the energy, and the compliance of the first layer of the MoS$_2$.
△ Less
Submitted 5 June, 2015; v1 submitted 27 May, 2015;
originally announced May 2015.
-
ab initio Electronic Transport Model with Explicit Solution to the Linearized Boltzmann Transport Equation
Authors:
Alireza Faghaninia,
Joel W. Ager III,
Cynthia S. Lo
Abstract:
Accurate models of carrier transport are essential for describing the electronic properties of semiconductor materials. To the best of our knowledge, the current models following the framework of the Boltzmann transport equation (BTE) either rely heavily on experimental data (i.e., semi-empirical), or utilize simplifying assumptions, such as the constant relaxation time approximation (BTE-cRTA). W…
▽ More
Accurate models of carrier transport are essential for describing the electronic properties of semiconductor materials. To the best of our knowledge, the current models following the framework of the Boltzmann transport equation (BTE) either rely heavily on experimental data (i.e., semi-empirical), or utilize simplifying assumptions, such as the constant relaxation time approximation (BTE-cRTA). While these models offer valuable physical insights and accurate calculations of transport properties in some cases, they often lack sufficient accuracy -- particularly in capturing the correct trends with temperature and carrier concentration. We present here a general transport model for calculating low-field electrical drift mobility and Seebeck coefficient of n-type semiconductors, by explicitly considering all relevant physical phenomena (i.e. elastic and inelastic scattering mechanisms). We first rewrite expressions for the rates of elastic scattering mechanisms, in terms of ab initio properties, such as the band structure, density of states, and polar optical phonon frequency. We then solve the linear BTE to obtain the perturbation to the electron distribution -- resulting from the dominant scattering mechanisms -- and use this to calculate the overall mobility and Seebeck coefficient. Using our model, we accurately calculate electrical transport properties of the compound n-type semiconductors, GaAs and InN, over various ranges of temperature and carrier concentration. Our fully predictive model provides high accuracy when compared to experimental measurements on both GaAs and InN, and vastly outperforms both semi-empirical models and the BTE-cRTA. Therefore, we assert that this approach represents a first step towards a fully ab initio carrier transport model that is valid in all compound semiconductors.
△ Less
Submitted 24 April, 2015; v1 submitted 21 January, 2015;
originally announced January 2015.
-
Host isotope mass effects on the hyperfine interaction of group-V donors in silicon
Authors:
T. Sekiguchi,
A. M. Tyryshkin,
S. Tojo,
E. Abe,
R. Mori,
H. Riemann,
N. V. Abrosimov,
P. Becker,
H. -J. Pohl,
J. W. Ager,
E. E. Haller,
M. L. W. Thewalt,
J. J. L. Morton,
S. A. Lyon,
K. M. Itoh
Abstract:
The effects of host isotope mass on the hyperfine interaction of group-V donors in silicon are revealed by pulsed electron nuclear double resonance (ENDOR) spectroscopy of isotopically engineered Si single crystals. Each of the hyperfine-split P-31, As-75, Sb-121, Sb-123, and Bi-209 ENDOR lines splits further into multiple components, whose relative intensities accurately match the statistical lik…
▽ More
The effects of host isotope mass on the hyperfine interaction of group-V donors in silicon are revealed by pulsed electron nuclear double resonance (ENDOR) spectroscopy of isotopically engineered Si single crystals. Each of the hyperfine-split P-31, As-75, Sb-121, Sb-123, and Bi-209 ENDOR lines splits further into multiple components, whose relative intensities accurately match the statistical likelihood of the nine possible average Si masses in the four nearest-neighbor sites due to random occupation by the three stable isotopes Si-28, Si-29, and Si-30. Further investigation with P-31 donors shows that the resolved ENDOR components shift linearly with the bulk-averaged Si mass.
△ Less
Submitted 25 July, 2014;
originally announced July 2014.
-
Radical-free dynamic nuclear polarization using electronic defects in silicon
Authors:
M. C. Cassidy,
C. Ramanathan,
D. G. Cory,
J. W. Ager,
C. M. Marcus
Abstract:
Direct dynamic nuclear polarization of 1H nuclei in frozen water and water-ethanol mixtures is demonstrated using silicon nanoparticles as the polarizing agent. Electron spins at dangling-bond sites near the silicon surface are identified as the source of the nuclear hyperpolarization. This novel polarization method open new avenues for the fabrication of surface engineered nanostructures to creat…
▽ More
Direct dynamic nuclear polarization of 1H nuclei in frozen water and water-ethanol mixtures is demonstrated using silicon nanoparticles as the polarizing agent. Electron spins at dangling-bond sites near the silicon surface are identified as the source of the nuclear hyperpolarization. This novel polarization method open new avenues for the fabrication of surface engineered nanostructures to create high nuclear-spin polarized solutions without introducing contaminating radicals, and for the study of molecules adsorbed onto surfaces.
△ Less
Submitted 22 June, 2012;
originally announced June 2012.
-
Few electron double quantum dot in an isotopically purified $^{28}$Si quantum well
Authors:
Andreas Wild,
Johannes Kierig,
Jürgen Sailer,
Joel Ager III,
Eugene Haller,
Gerhard Abstreiter,
Stefan Ludwig,
Dominique Bougeard
Abstract:
We present a few electron double quantum dot (QD) device defined in an isotopically purified $^{28}$Si quantum well (QW). An electron mobility of $5.5 \cdot 10^4 cm^2(Vs)^{-1}$ is observed in the QW which is the highest mobility ever reported for a 2D electron system in $^{28}$Si. The residual concentration of $^{29}$Si nuclei in the $^{28}$Si QW is lower than $10^{3} ppm$, at the verge where the…
▽ More
We present a few electron double quantum dot (QD) device defined in an isotopically purified $^{28}$Si quantum well (QW). An electron mobility of $5.5 \cdot 10^4 cm^2(Vs)^{-1}$ is observed in the QW which is the highest mobility ever reported for a 2D electron system in $^{28}$Si. The residual concentration of $^{29}$Si nuclei in the $^{28}$Si QW is lower than $10^{3} ppm$, at the verge where the hyperfine interaction is theoretically no longer expected to dominantly limit the $T_{2}$ spin dephasing time. We also demonstrate a complete suppression of hysteretic gate behavior and charge noise using a negatively biased global top gate.
△ Less
Submitted 6 April, 2012; v1 submitted 15 February, 2012;
originally announced February 2012.
-
Effect of pulse error accumulation on dynamical decoupling of the electron spins of phosphorus donors in silicon
Authors:
Zhi-Hui Wang,
Wenxian Zhang,
A. M. Tyryshkin,
S. A. Lyon,
J. W. Ager,
E. E. Haller,
V. V. Dobrovitski
Abstract:
Dynamical decoupling (DD) is an efficient tool for preserving quantum coherence in solid-state spin systems. However, the imperfections of real pulses can ruin the performance of long DD sequences. We investigate the accumulation and compensation of different pulse errors in DD using the electron spins of phosphorus donors in silicon as a test system. We study periodic DD sequences (PDD) based on…
▽ More
Dynamical decoupling (DD) is an efficient tool for preserving quantum coherence in solid-state spin systems. However, the imperfections of real pulses can ruin the performance of long DD sequences. We investigate the accumulation and compensation of different pulse errors in DD using the electron spins of phosphorus donors in silicon as a test system. We study periodic DD sequences (PDD) based on spin rotations about two perpendicular axes, and their concatenated and symmetrized versions. We show that pulse errors may quickly destroy some spin states, but maintain other states with high fidelity over long times. Pulse sequences based on spin rotations about $x$ and $y$ axes outperform those based on $x$ and $z$ axes due to the accumulation of pulse errors. Concatenation provides an efficient way to suppress the impact of pulse errors, and can maintain high fidelity for all spin components: pulse errors do not accumulate (to first order) as the concatenation level increases, despite the exponential increase in the number of pulses. Our theoretical model gives a clear qualitative picture of the error accumulation, and produces results in quantitative agreement with the experiments.
△ Less
Submitted 3 January, 2012; v1 submitted 29 November, 2010;
originally announced November 2010.
-
Dynamical Decoupling in the Presence of Realistic Pulse Errors
Authors:
A. M. Tyryshkin,
Zhi-Hui Wang,
Wenxian Zhang,
E. E. Haller,
J. W. Ager,
V. V. Dobrovitski,
S. A. Lyon
Abstract:
One of the most significant hurdles to be overcome on the path to practical quantum information processors is dealing with quantum errors. Dynamical decoupling is a particularly promising approach that complements conventional quantum error correction by eliminating some correlated errors without the overhead of additional qubits. In practice, the control pulses used for decoupling are imperfect a…
▽ More
One of the most significant hurdles to be overcome on the path to practical quantum information processors is dealing with quantum errors. Dynamical decoupling is a particularly promising approach that complements conventional quantum error correction by eliminating some correlated errors without the overhead of additional qubits. In practice, the control pulses used for decoupling are imperfect and thus introduce errors which can accumulate after many pulses. These instrumental errors can destroy the quantum state. Here we examine several dynamical decoupling sequences, and their concatenated variants, using electron spin resonance of donor electron spins in a $^{28}$Si crystal. All of the sequences cancel phase noise arising from slowly fluctuating magnetic fields in our spectrometer, but only those sequences based upon alternating $π$-rotations about the X- and Y-axes in the rotating frame (XYXY sequences) demonstrate the ability to store an arbitrary quantum state. By comparing the experimental results with a detailed theoretical analysis we demonstrate that the superior performance of XYXY sequences arises from the fact that they are self-correcting for the dominant instrumental pulse errors in magnetic resonance experiments. We further find that concatenated sequences perform better than the periodic variants, maintaining near 100% fidelities for spin states even after several hundred control pulses. Intuitively, one would expect the instrumental error to increase with the number of pulses in the sequence but we show that the dominant first-order error does not increase when concatenating the XYXY sequence.
△ Less
Submitted 13 November, 2010; v1 submitted 8 November, 2010;
originally announced November 2010.
-
A Schottky top-gated two-dimensional electron system in a nuclear spin free Si/SiGe heterostructure
Authors:
J. Sailer,
V. Lang,
G. Abstreiter,
G. Tsuchiya,
K. M. Itoh,
J. W. Ager III,
E. E. Haller,
D. Kupidura,
D. Harbusch,
S. Ludwig,
D. Bougeard
Abstract:
We report on the realization and top-gating of a two-dimensional electron system in a nuclear spin free environment using 28Si and 70Ge source material in molecular beam epitaxy. Electron spin decoherence is expected to be minimized in nuclear spin-free materials, making them promising hosts for solid-state based quantum information processing devices. The two-dimensional electron system exhibit…
▽ More
We report on the realization and top-gating of a two-dimensional electron system in a nuclear spin free environment using 28Si and 70Ge source material in molecular beam epitaxy. Electron spin decoherence is expected to be minimized in nuclear spin-free materials, making them promising hosts for solid-state based quantum information processing devices. The two-dimensional electron system exhibits a mobility of 18000 cm2/Vs at a sheet carrier density of 4.6E11 cm-2 at low temperatures. Feasibility of reliable gating is demonstrated by transport through split-gate structures realized with palladium Schottky top-gates which effectively control the two-dimensional electron system underneath. Our work forms the basis for the realization of an electrostatically defined quantum dot in a nuclear spin free environment.
△ Less
Submitted 16 January, 2009;
originally announced January 2009.
-
Chiral Symmetry and Electron Spin Relaxation of Lithium Donors in Silicon
Authors:
V. N. Smelyanskiy,
A. G. Petukhov,
A. M. Tyryshkin,
S. A. Lyon,
T. Schenkel,
J. W. Ager,
E. E. Haller
Abstract:
We report theoretical and experimental studies of the longitudinal electron spin and orbital relaxation time of interstitial Li donors in $^{28}$Si. We predict that despite the near-degeneracy of the ground-state manifold the spin relaxation times are extremely long for the temperatures below 0.3 K. This prediction is based on a new finding of the chiral symmetry of the donor states, which presi…
▽ More
We report theoretical and experimental studies of the longitudinal electron spin and orbital relaxation time of interstitial Li donors in $^{28}$Si. We predict that despite the near-degeneracy of the ground-state manifold the spin relaxation times are extremely long for the temperatures below 0.3 K. This prediction is based on a new finding of the chiral symmetry of the donor states, which presists in the presence of random strains and magnetic fields parallel to one of the cubic axes. Experimentally observed kinetics of magnetization reversal at 2.1 K and 4.5 K are in a very close agreement with the theory. To explain these kinetics we introduced a new mechanism of spin decoherence based on a combination of a small off-site displacement of the Li atom and an umklapp phonon process. Both these factors weakly break chiral symmetry and enable the long-term spin relaxation.
△ Less
Submitted 24 July, 2008;
originally announced July 2008.
-
Solid state quantum memory using the 31P nuclear spin
Authors:
John J. L. Morton,
Alexei M. Tyryshkin,
Richard M. Brown,
Shyam Shankar,
Brendon W. Lovett,
Arzhang Ardavan,
Thomas Schenkel,
Eugene E. Haller,
Joel W. Ager,
S. A. Lyon
Abstract:
The transfer of information between different physical forms is a central theme in communication and computation, for example between processing entities and memory. Nowhere is this more crucial than in quantum computation, where great effort must be taken to protect the integrity of a fragile quantum bit. Nuclear spins are known to benefit from long coherence times compared to electron spins, b…
▽ More
The transfer of information between different physical forms is a central theme in communication and computation, for example between processing entities and memory. Nowhere is this more crucial than in quantum computation, where great effort must be taken to protect the integrity of a fragile quantum bit. Nuclear spins are known to benefit from long coherence times compared to electron spins, but are slow to manipulate and suffer from weak thermal polarisation. A powerful model for quantum computation is thus one in which electron spins are used for processing and readout while nuclear spins are used for storage. Here we demonstrate the coherent transfer of a superposition state in an electron spin 'processing' qubit to a nuclear spin 'memory' qubit, using a combination of microwave and radiofrequency pulses applied to 31P donors in an isotopically pure 28Si crystal. The electron spin state can be stored in the nuclear spin on a timescale that is long compared with the electron decoherence time and then coherently transferred back to the electron spin, thus demonstrating the 31P nuclear spin as a solid-state quantum memory. The overall store/readout fidelity is about 90%, attributed to systematic imperfections in radiofrequency pulses which can be improved through the use of composite pulses. We apply dynamic decoupling to protect the nuclear spin quantum memory element from sources of decoherence. The coherence lifetime of the quantum memory element is found to exceed one second at 5.5K.
△ Less
Submitted 30 June, 2008; v1 submitted 13 March, 2008;
originally announced March 2008.
-
Microstructure, magneto-transport and magnetic properties of Gd-doped magnetron-sputtered amorphous carbon
Authors:
L. Zeng,
E. Helgren,
F. Hellman,
R. Islam,
D. J. Smith,
J. W. Ager III
Abstract:
The magnetic rare earth element gadolinium (Gd) was doped into thin films of amorphous carbon (hydrogenated \textit{a}-C:H, or hydrogen-free \textit{a}-C) using magnetron co-sputtering. The Gd acted as a magnetic as well as an electrical dopant, resulting in an enormous negative magnetoresistance below a temperature ($T'$). Hydrogen was introduced to control the amorphous carbon bonding structur…
▽ More
The magnetic rare earth element gadolinium (Gd) was doped into thin films of amorphous carbon (hydrogenated \textit{a}-C:H, or hydrogen-free \textit{a}-C) using magnetron co-sputtering. The Gd acted as a magnetic as well as an electrical dopant, resulting in an enormous negative magnetoresistance below a temperature ($T'$). Hydrogen was introduced to control the amorphous carbon bonding structure. High-resolution electron microscopy, ion-beam analysis and Raman spectroscopy were used to characterize the influence of Gd do** on the \textit{a-}Gd$_x$C$_{1-x}$(:H$_y$) film morphology, composition, density and bonding. The films were largely amorphous and homogeneous up to $x$=22.0 at.%. As the Gd do** increased, the $sp^{2}$-bonded carbon atoms evolved from carbon chains to 6-member graphitic rings. Incorporation of H opened up the graphitic rings and stabilized a $sp^{2}$-rich carbon-chain random network. The transport properties not only depended on Gd do**, but were also very sensitive to the $sp^{2}$ ordering. Magnetic properties, such as the spin-glass freezing temperature and susceptibility, scaled with the Gd concentration.
△ Less
Submitted 26 January, 2007;
originally announced January 2007.
-
Coherence of Spin Qubits in Silicon
Authors:
A. M. Tyryshkin,
J. J. L. Morton,
S. C. Benjamin,
A. Ardavan,
G. A. D. Briggs,
J. W. Ager,
S. A. Lyon
Abstract:
Given the effectiveness of semiconductor devices for classical computation one is naturally led to consider semiconductor systems for solid state quantum information processing. Semiconductors are particularly suitable where local control of electric fields and charge transport are required. Conventional semiconductor electronics is built upon these capabilities and has demonstrated scaling to l…
▽ More
Given the effectiveness of semiconductor devices for classical computation one is naturally led to consider semiconductor systems for solid state quantum information processing. Semiconductors are particularly suitable where local control of electric fields and charge transport are required. Conventional semiconductor electronics is built upon these capabilities and has demonstrated scaling to large complicated arrays of interconnected devices. However, the requirements for a quantum computer are very different from those for classical computation, and it is not immediately obvious how best to build one in a semiconductor. One possible approach is to use spins as qubits: of nuclei, of electrons, or both in combination. Long qubit coherence times are a prerequisite for quantum computing, and in this paper we will discuss measurements of spin coherence in silicon. The results are encouraging - both electrons bound to donors and the donor nuclei exhibit low decoherence under the right circumstances. Doped silicon thus appears to pass the first test on the road to a quantum computer.
△ Less
Submitted 29 December, 2005;
originally announced December 2005.
-
Effect of Native Defects on Optical Properties of InxGa1-xN Alloys
Authors:
S. X. Li,
E. E. Haller,
K. M. Yu,
W. Walukiewicz,
J. W. Ager III,
J. Wu,
W. Shan,
Hai Lu,
William J. Schaff
Abstract:
The energy position of the optical absorption edge and the free carrier populations in InxGa1-xN ternary alloys can be controlled using high energy 4He+ irradiation. The blue shift of the absorption edge after irradiation in In-rich material (x > 0.34) is attributed to the band-filling effect (Burstein-Moss shift) due to the native donors introduced by the irradiation. In Ga-rich material, optic…
▽ More
The energy position of the optical absorption edge and the free carrier populations in InxGa1-xN ternary alloys can be controlled using high energy 4He+ irradiation. The blue shift of the absorption edge after irradiation in In-rich material (x > 0.34) is attributed to the band-filling effect (Burstein-Moss shift) due to the native donors introduced by the irradiation. In Ga-rich material, optical absorption measurements show that the irradiation-introduced native defects are inside the bandgap, where they are incorporated as acceptors. The observed irradiation-produced changes in the optical absorption edge and the carrier populations in InxGa1-xN are in excellent agreement with the predictions of the amphoteric defect model.
△ Less
Submitted 4 August, 2005;
originally announced August 2005.
-
Structural and Electronic Properties of Amorphous and Polycrystalline In2Se3 Films
Authors:
A. Chaiken,
K. Nauka,
G. A. Gibson,
Heon Lee,
C. C. Yang,
J. Wu,
J. W. Ager,
K. M. Yu,
W. Walukiewicz
Abstract:
Structural and electronic properties of amorphous and single-phase polycrystalline films of gamma- and kappa-In2Se3 have been measured. The stable gamma phase nucleates homogeneously in the film bulk and has a high resistivity, while the metastable kappa phase nucleates at the film surface and has a moderate resistivity. The microstructures of hot-deposited and post-annealed cold-deposited gamma…
▽ More
Structural and electronic properties of amorphous and single-phase polycrystalline films of gamma- and kappa-In2Se3 have been measured. The stable gamma phase nucleates homogeneously in the film bulk and has a high resistivity, while the metastable kappa phase nucleates at the film surface and has a moderate resistivity. The microstructures of hot-deposited and post-annealed cold-deposited gamma films are quite different but the electronic properties are similar. The increase in the resistivity of amorphous In2Se3 films upon annealing is interpreted in terms of the replacement of In-In bonds with In-Se bonds during crystallization. Great care must be taken in the preparation of In2Se3 films for electrical measurements as the presence of excess chalcogen or surface oxidation may greatly affect the film properties.
△ Less
Submitted 19 March, 2003;
originally announced March 2003.