-
Thin viscoelastic dewetting films of Jeffreys type subjected to gravity and substrate interactions
Authors:
Valeria Barra,
Shahriar Afkhami,
Lou Kondic
Abstract:
This work presents a study of the interfacial dynamics of thin viscoelastic films subjected to the gravitational force and substrate interactions induced by the disjoining pressure, in two spatial dimensions. The governing equation is derived as a long-wave approximation of the Navier-Stokes equations for incompressible viscoelastic liquids under the effect of gravity, with the Jeffreys model for…
▽ More
This work presents a study of the interfacial dynamics of thin viscoelastic films subjected to the gravitational force and substrate interactions induced by the disjoining pressure, in two spatial dimensions. The governing equation is derived as a long-wave approximation of the Navier-Stokes equations for incompressible viscoelastic liquids under the effect of gravity, with the Jeffreys model for viscoelastic stresses. For the particular cases of horizontal or inverted planes, the linear stability analysis is performed to investigate the influence of the physical parameters involved on the growth rate and length scales of instabilities. Numerical simulations of the nonlinear regime of the dewetting process are presented for the particular case of an inverted plane. Both gravity and the disjoining pressure are found to affect not only the length scale of instabilities, but also the final configuration of dewetting, by favoring the formation of satellite droplets, that are suppressed by the slippage with the solid substrate.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Numerical Simulations of Nearly Incompressible Viscoelastic Membranes
Authors:
Valeria Barra,
Shawn A. Chester,
Shahriar Afkhami
Abstract:
This work presents a novel numerical investigation of the dynamics of free-boundary flows of viscoelastic liquid membranes. The governing equation describes the balance of linear momentum, in which the stresses include the viscoelastic response to deformations of Maxwell type. A penalty method is utilized to enforce near incompressibility of the viscoelastic media, in which the penalty constant is…
▽ More
This work presents a novel numerical investigation of the dynamics of free-boundary flows of viscoelastic liquid membranes. The governing equation describes the balance of linear momentum, in which the stresses include the viscoelastic response to deformations of Maxwell type. A penalty method is utilized to enforce near incompressibility of the viscoelastic media, in which the penalty constant is proportional to the viscosity of the fluid. A finite element method is used, in which the slender geometry representing the liquid membrane, is discretized by linear three-node triangular elements under plane stress conditions. Two applications of interest are considered for the numerical framework provided: shear flow, and extensional flow in drawing processes.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Numerical Simulation of Superparamagnetic Nanoparticle Motion in Blood Vessels for Magnetic Drug Delivery
Authors:
M. Lee,
A. Shelke,
S. Singh,
J. Fan,
P. Zaleski,
S. Afkhami
Abstract:
A numerical model is developed for the motion of superparamagnetic nanoparticles in a non-Newtonian blood flow under the influence of a magnetic field. The rheological properties of blood are modeled by the Carreau flow and viscosity, and the stochastic effects of Brownian motion and red blood cell collisions are considered. The model is validated with existing data and good agreement with experim…
▽ More
A numerical model is developed for the motion of superparamagnetic nanoparticles in a non-Newtonian blood flow under the influence of a magnetic field. The rheological properties of blood are modeled by the Carreau flow and viscosity, and the stochastic effects of Brownian motion and red blood cell collisions are considered. The model is validated with existing data and good agreement with experimental results is shown. The effectiveness of magnetic drug delivery in various blood vessels is assessed and found to be most successful in arterioles and capillaries. A range of magnetic field strengths are modeled using equations for both a bar magnet and a point dipole: it is shown that the bar magnet is effective at capturing nanoparticles in limited cases while the point dipole is highly effective across a range of conditions. A parameter study is conducted to show the effects of changing the dipole moment, the distance from the magnet to the blood vessel, and the initial release point of the nanoparticles. The distance from the magnet to the blood vessel is shown to play a significant role in determining nanoparticle capture rate. The optimal initial release position is found to be located within the tumor radius in capillaries and arterioles to prevent rapid diffusion to the edges of the blood vessel prior to arriving at the tumor, and near the edge of the magnet when a bar magnet is used.
△ Less
Submitted 7 October, 2021; v1 submitted 30 September, 2021;
originally announced October 2021.
-
Challenges of Numerical Simulation of Dynamic Wetting Phenomena: A Review
Authors:
Shahriar Afkhami
Abstract:
Wetting is fundamental to many technological applications that involve the motion of the fluid-fluid interface on a solid. While static wetting is well understood in the context of thermodynamic equilibrium, dynamic wetting is more complicated in that liquid interactions with a solid phase, possibly on molecular scales, can strongly influence the macroscopic scale dynamics. The problem with contin…
▽ More
Wetting is fundamental to many technological applications that involve the motion of the fluid-fluid interface on a solid. While static wetting is well understood in the context of thermodynamic equilibrium, dynamic wetting is more complicated in that liquid interactions with a solid phase, possibly on molecular scales, can strongly influence the macroscopic scale dynamics. The problem with continuum models of wetting phenomena is then that they ought to be augmented with microscopic models to describe the molecular neighborhood of the moving contact line. In this review, widely used models for the computation of wetting flows are summarized first, followed by an overview of direct numerical simulations based on the Volume-of-Fluid approach. Recent developments in the Volume-of-Fluid simulations of the wetting are then reviewed, with a particular attention paid on combining macro-scale simulations with the hydrodynamic theory near the moving contact line, as well as including a microscopic description by coupling with the van der Waals interface model. Finally, the extension to modeling the contact line motion on non-flat surfaces is surveyed, followed by hot topics in nucleate boiling.
△ Less
Submitted 12 August, 2021;
originally announced August 2021.
-
Pore-scale direct numerical simulation of Haines jumps in a porous media model
Authors:
Adam O'Brien,
Shahriar Afkhami,
Markus Bussmann
Abstract:
Direct numerical simulations are presented for a porous media model consisting of two immiscible fluids, an invading and defending phase, in a two-dimensional micro-geometry filled with randomly sized and randomly distributed cylinders. First, interface instability and penetration modes are studied when varying the wetting features of a single pore in the porous medium. It is found that the displa…
▽ More
Direct numerical simulations are presented for a porous media model consisting of two immiscible fluids, an invading and defending phase, in a two-dimensional micro-geometry filled with randomly sized and randomly distributed cylinders. First, interface instability and penetration modes are studied when varying the wetting features of a single pore in the porous medium. It is found that the displacement patterns not only change with the capillary number, as previously observed, but also are a function of the contact angle, even for a viscosity ratio of unity. This is an important conclusion suggesting that capillary number and viscosity ratio alone cannot completely describe the pore-scale displacement. Second, rapid pore-scale displacement is considered, where the displacements are accompanied by sudden interface jumps from one site to another, known as Haines jumps. The characteristic time and length scales of a Haines jump are examined to better understand the transient dynamics of the jump. We then focus on analyzing the Haines jump in a simple pore configuration where cylinders of equal size are placed at the vertices of equilateral triangles. We use this geometry to provide more insight into the effect of the contact angle at which the Haines jump is predicted.
△ Less
Submitted 13 May, 2020; v1 submitted 17 May, 2019;
originally announced May 2019.
-
Breakup of finite-size liquid filaments: Transition from no-breakup to breakup including substrate effects
Authors:
A. Dziedzic,
M. Nakrani,
B. Ezra,
M. Syed,
S. Popinet,
S. Afkhami
Abstract:
This work studies the breakup of finite-size liquid filaments, when also including substrate effects, using direct numerical simulations. The study focuses on the effects of three parameters: Ohnesorge number, the ratio of the viscous forces to inertial and surface tension forces, the liquid filament aspect ratio, and where there is a substrate, a measure of the fluid slip on the substrate, i.e. s…
▽ More
This work studies the breakup of finite-size liquid filaments, when also including substrate effects, using direct numerical simulations. The study focuses on the effects of three parameters: Ohnesorge number, the ratio of the viscous forces to inertial and surface tension forces, the liquid filament aspect ratio, and where there is a substrate, a measure of the fluid slip on the substrate, i.e. slip length. Through these parameters, it is determined whether a liquid filament breaks up during the evolution toward its final equilibrium state. Three scenarios are identified: a collapse into a single droplet, the breakup into one or multiple droplets, and recoalescence into a single droplet after the breakup (or even possibly another breakup after recoalescence). The results are compared with the ones available in the literature for free-standing liquid filaments. The findings show that the presence of the substrate promotes breakup of the filament. The effect of the degree of slip on the breakup is also discussed. The parameter domain regions are comprehensively explored when including the slip effects. An experimental case is also carried out to illustrate the collapse and breakup of a finite-size silicon oil filament supported on a substrate, showcasing a critical length of the breakup in a physical configuration. Finally, direct numerical simulations reveal striking new details into the breakup pattern for low Ohnesorge numbers, where the dynamics are fast and the experimental imaging is not available; our results therefore significantly extend the range of Ohnesorge number over which filament breakup has been considered.
△ Less
Submitted 1 August, 2018; v1 submitted 3 May, 2018;
originally announced May 2018.
-
Influence of thermal effects on stability of nanoscale films and filaments on thermally conductive substrates
Authors:
Ivana Seric,
Shahriar Afkhami,
Lou Kondic
Abstract:
We consider films and filaments of nanoscale thickness on thermally conductive substrates exposed to external heating. Particular focus is on metal films exposed to laser irradiation. Due to short length scales involved, the absorption of heat in the metal is directly coupled to the film evolution, since the absorption length and the film thickness are comparable. Such a setup requires self-consis…
▽ More
We consider films and filaments of nanoscale thickness on thermally conductive substrates exposed to external heating. Particular focus is on metal films exposed to laser irradiation. Due to short length scales involved, the absorption of heat in the metal is directly coupled to the film evolution, since the absorption length and the film thickness are comparable. Such a setup requires self-consistent consideration of fluid mechanical and thermal effects. We approach the problem via Volume-of-Fluid based simulations that include destabilizing liquid metal-solid substrate interaction potentials. These simulations couple fluid dynamics directly with the spatio-temporal evolution of the temperature field both in the fluid and in the substrate. We focus on the influence of the temperature variation of material parameters, in particular of surface tension and viscosity. Regarding variation of surface tension with temperature, the main finding is that while Marangoni effect may not play a significant role in the considered setting, the temporal variation of surface tension (modifying normal stress balance) is significant and could lead to complex evolution including oscillatory evolution of the liquid metal-air interface. Temperature variation of film viscosity is also found to be relevant. Therefore, the variations of surface tensions and viscosity could both influence the emerging wavelengths in experiments. In contrast, the filament geometry is found to be much less sensitive to a variation of material parameters with temperature.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Ferrofluids and magnetically guided superparamagnetic particles in flows: A review of simulations and modeling
Authors:
S. Afkhami,
Y. Renardy
Abstract:
Ferrofluids are typically suspensions of magnetite nanoparticles, and behave as a homogeneous continuum. The production of nanoparticles with a narrow size distribution and the achievement of colloidal stability are important technological issues. The ability of the ferrofluid to respond to an external magnetic field in a controllable manner has made it emerge as a smart material in a variety of a…
▽ More
Ferrofluids are typically suspensions of magnetite nanoparticles, and behave as a homogeneous continuum. The production of nanoparticles with a narrow size distribution and the achievement of colloidal stability are important technological issues. The ability of the ferrofluid to respond to an external magnetic field in a controllable manner has made it emerge as a smart material in a variety of applications, such as seals, lubricants, electronics cooling, shock absorbers and adaptive optics. Magnetic nanoparticle suspensions have also gained attraction recently in a range of biomedical applications, such as cell separation, hyperthermia, MRI, drug targeting and cancer diagnosis. In this review, we provide an introduction to mathematical modeling of three problems: motion of superparamagnetic nanoparticles in magnetic drug targeting, the motion of a ferrofluid drop consisting of chemically bound nanoparticles without a carrier fluid, and the breakage of a thin film of a ferrofluid.
△ Less
Submitted 31 March, 2017;
originally announced April 2017.
-
Transition in a numerical model of contact line dynamics and forced dewetting
Authors:
S. Afkhami,
J. Buongiorno,
A. Guion,
S. Popinet,
Y. Saade,
R. Scardovelli,
S. Zaleski
Abstract:
We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, d…
▽ More
We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, dynamic simulations can proceed without any explicit additional numerical procedure. We investigate angles from $15^\circ$ to $110^\circ$ and capillary numbers from $0.00085$ to $0.2$ where the mesh size $Δ$ is varied in the range of $0.0035$ to $0.06$ of the capillary length $l_c$. To interpret the results, we use Cox's theory which involves a microscopic distance $r_m$ and a microscopic angle $θ_e$. In the numerical case, the equivalent of $θ_e$ is the angle $θ_Δ$ and we find that Cox's theory also applies. We introduce the scaling factor or gauge function $φ$ so that $r_m = Δ/φ$ and estimate this gauge function by comparing our numerics to Cox's theory. The comparison provides a direct assessment of the agreement of the numerics with Cox's theory and reveals a critical feature of the numerical treatment of contact line dynamics: agreement is poor at small angles while it is better at large angles. This scaling factor is shown to depend only on $θ_Δ$ and the viscosity ratio $q$. In the case of small $θ_e$, we use the prediction by Eggers [Phys. Rev. Lett., vol. 93, pp 094502, 2004] of the critical capillary number for the Landau-Levich-Derjaguin forced dewetting transition. We generalize this prediction to large $θ_e$ and arbitrary $q$ and express the critical capillary number as a function of $θ_e$ and $r_m$. An analogy can be drawn between $r_m$ and the numerical slip length.
△ Less
Submitted 27 October, 2018; v1 submitted 20 March, 2017;
originally announced March 2017.
-
Direct numerical simulation of variable surface tension flows using a Volume-of-Fluid method
Authors:
Ivana Seric,
Shahriar Afkhami,
Lou Kondic
Abstract:
We develop a general methodology for the inclusion of variable surface tension into a Volume-of-Fluid based Navier-Stokes solver. This new numerical model provides a robust and accurate method for computing the surface gradients directly by finding the tangent directions on the interface using height functions. The implementation is applicable to both temperature and concentration dependent surfac…
▽ More
We develop a general methodology for the inclusion of variable surface tension into a Volume-of-Fluid based Navier-Stokes solver. This new numerical model provides a robust and accurate method for computing the surface gradients directly by finding the tangent directions on the interface using height functions. The implementation is applicable to both temperature and concentration dependent surface tension, along with the setups involving a large jump in the temperature between the fluid and its surrounding, as well as the situations where the concentration should be strictly confined to the fluid domain, such as the mixing of fluids with different surface tension coefficients. We demonstrate the applicability of our method to thermocapillary migration of bubbles and coalescence of drops characterized by different surface tension.
△ Less
Submitted 1 March, 2017;
originally announced March 2017.
-
On the capillary self-focusing in a microfluidic system
Authors:
M. Hein,
R. Seemann,
S. Afkhami
Abstract:
A computational framework is developed to address capillary self-focusing in Step Emulsification. The microfluidic system consists of a single shallow and wide microchannel that merges into a deep reservoir. A continuum approach coupled with a volume of fluid method is used to model the capillary self-focusing effect. The original governing equations are reduced using the Hele-Shaw approximation.…
▽ More
A computational framework is developed to address capillary self-focusing in Step Emulsification. The microfluidic system consists of a single shallow and wide microchannel that merges into a deep reservoir. A continuum approach coupled with a volume of fluid method is used to model the capillary self-focusing effect. The original governing equations are reduced using the Hele-Shaw approximation. We show that the interface between the two fluids takes the shape of a neck narrowing in the flow direction just before entering the reservoir, in agreement with our experimental observations. Our computational model relies on the assumption that the pressure at the boundary, where the fluid exits into the reservoir, is the uniform pressure in the reservoir. We investigate this hypothesis by comparing the numerical results with experimental data. We conjecture that the pressure boundary condition becomes important when the width of the neck is comparable to the depth of the microchannel. A correction to the exit pressure boundary condition is then proposed, which is determined by comparison with experimental data. We also present the experimental observations and the numerical results of the transitions of breakup regimes.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
Interfacial Dynamics of Thin Viscoelastic Films and Drops
Authors:
Valeria Barra,
Shahriar Afkhami,
Lou Kondic
Abstract:
We present a computational investigation of thin viscoelastic films and drops on a solid substrate subject to the van der Waals interaction force, in two spatial dimensions. The governing equations are obtained within a long-wave approximation of the Navier-Stokes equations with Jeffreys model for viscoelastic stresses. We investigate the effects of viscoelasticity, Newtonian viscosity, and the su…
▽ More
We present a computational investigation of thin viscoelastic films and drops on a solid substrate subject to the van der Waals interaction force, in two spatial dimensions. The governing equations are obtained within a long-wave approximation of the Navier-Stokes equations with Jeffreys model for viscoelastic stresses. We investigate the effects of viscoelasticity, Newtonian viscosity, and the substrate slippage on the dynamics of thin viscoelastic films. We also study the effects of viscoelasticity on drops that spread or recede on a prewetted substrate. For dewetting films, the numerical results show the presence of multiple secondary droplets for higher values of elasticity, consistently with experimental findings. For drops, we find that elastic effects lead to deviations from the Cox-Voinov law for partially wetting fluids. In general, elastic effects enhance spreading, and suppress retraction, compared to Newtonian ones.
△ Less
Submitted 8 October, 2016; v1 submitted 23 February, 2016;
originally announced February 2016.
-
A numerical approach for the direct computation of flows including fluid-solid interaction: modeling contact angle, film rupture, and dewetting
Authors:
K. Mahady,
S. Afkhami,
L. Kondic
Abstract:
In this paper, we present a computationally efficient method for including fluid-solid interactions into direct numerical simulations of the Navier-Stokes equations. This method is found to be as powerful as our earlier formulation [J. Comp. Phys., vol. 249: 243 (2015)], while outperforming the earlier method in terms of computational efficiency. The performance and efficacy of the presented metho…
▽ More
In this paper, we present a computationally efficient method for including fluid-solid interactions into direct numerical simulations of the Navier-Stokes equations. This method is found to be as powerful as our earlier formulation [J. Comp. Phys., vol. 249: 243 (2015)], while outperforming the earlier method in terms of computational efficiency. The performance and efficacy of the presented method are demonstrated by computing contact angles of droplets at equilibrium. Furthermore, we study the instability of films due to destabilizing fluid-solid interactions, and discuss the influence of contact angle and inertial effects on film breakup. In particular, direct simulation results show an increase in the final characteristic length scales when compared to the predictions of a linear stability analysis, suggesting significant influence of nonlinear effects. Our results also show that emerging length scales differ, depending on a number of physical dimensions considered.
△ Less
Submitted 12 April, 2016; v1 submitted 25 September, 2015;
originally announced September 2015.
-
Interfacial deformation and jetting of a magnetic fluid
Authors:
Shahriar Afkhami,
Linda J. Cummings,
Ian M. Griffiths
Abstract:
An attractive technique for forming and collecting aggregates of magnetic material at a liquid--air interface by an applied magnetic field gradient was recently addressed theoretically and experimentally [Soft Matter, (9) 2013, 8600-8608]: when the magnetic field is weak, the deflection of the liquid--air interface has a steady shape, while for sufficiently strong fields, the interface destabilize…
▽ More
An attractive technique for forming and collecting aggregates of magnetic material at a liquid--air interface by an applied magnetic field gradient was recently addressed theoretically and experimentally [Soft Matter, (9) 2013, 8600-8608]: when the magnetic field is weak, the deflection of the liquid--air interface has a steady shape, while for sufficiently strong fields, the interface destabilizes and forms a jet that extracts magnetic material. Motivated by this work, we develop a numerical model for the closely related problem of solving two-phase Navier--Stokes equations coupled with the static Maxwell equations. We computationally model the forces generated by a magnetic field gradient produced by a permanent magnet and so determine the interfacial deflection of a magnetic fluid (a pure ferrofluid system) and the transition into a jet. We analyze the shape of the liquid--air interface during the deformation stage and the critical magnet distance for which the static interface transitions into a jet. We draw conclusions on the ability of our numerical model to predict the large interfacial deformation and the consequent jetting, free of any fitting parameter.
△ Less
Submitted 5 January, 2015;
originally announced January 2015.
-
A volume of fluid method for simulating fluid/fluid interfaces in contact with solid boundaries
Authors:
Kyle Mahady,
Shahriar Afkhami,
Lou Kondic
Abstract:
In this paper, we present a novel approach to model the fluid/solid interaction forces in a direct solver of the Navier-Stokes equations based on the volume of fluid interface tracking method. The key ingredient of the model is the explicit inclusion of the fluid/solid interaction forces into the governing equations. We show that the interaction forces lead to a partial wetting condition and in pa…
▽ More
In this paper, we present a novel approach to model the fluid/solid interaction forces in a direct solver of the Navier-Stokes equations based on the volume of fluid interface tracking method. The key ingredient of the model is the explicit inclusion of the fluid/solid interaction forces into the governing equations. We show that the interaction forces lead to a partial wetting condition and in particular to a natural definition of the equilibrium contact angle. We present two numerical methods to discretize the interaction forces that enter the model; these two approaches differ in complexity and convergence. To validate the computational framework, we consider the application of these models to simulate two-dimensional drops at equilibrium, as well as drop spreading. We demonstrate that the model, by including the underlying physics, captures contact line dynamics for arbitrary contact angles. More generally, the approach permits novel means to study contact lines, as well as a diverse range of phenomena that previously could not be addressed in direct simulations.
△ Less
Submitted 13 June, 2015; v1 submitted 3 September, 2014;
originally announced September 2014.
-
Capillary focusing close to a topographic step: Shape and instability of confined liquid filaments
Authors:
M. Hein,
S. Afkhami,
R. Seemann,
L. Kondic
Abstract:
Step-emulsification is a microfluidic technique for droplet generation which relies on the abrupt decrease of confinement of a liquid filament surrounded by a continuous phase. A striking feature of this geometry is the transition between two distinct droplet breakup regimes, the "step-regime" and "jet-regime", at a critical capillary number. In the step-regime, small and monodisperse droplets bre…
▽ More
Step-emulsification is a microfluidic technique for droplet generation which relies on the abrupt decrease of confinement of a liquid filament surrounded by a continuous phase. A striking feature of this geometry is the transition between two distinct droplet breakup regimes, the "step-regime" and "jet-regime", at a critical capillary number. In the step-regime, small and monodisperse droplets break off from the filament directly at a topographic step, while in the jet-regime a jet protrudes into the larger channel region and large plug-like droplets are produced. We characterize the breakup behavior as a function of the filament geometry and the capillary number and present experimental results on the shape and evolution of the filament for a wide range of capillary numbers in the jet-regime. We compare the experimental results with numerical simulations. Assumptions based on the smallness of the depth of the microfluidic channel allow to reduce the governing equations to the Hele-Shaw problem with surface tension. The full nonlinear equations are then solved numerically using a volume-of-fluid based algorithm. The computational framework also captures the transition between both regimes, offering a deeper understanding of the underlying breakup mechanism.
△ Less
Submitted 3 September, 2014; v1 submitted 20 May, 2014;
originally announced May 2014.
-
A volume-of-fluid formulation for the study of co-flowing fluids governed by the Hele-Shaw equations
Authors:
Shahriar Afkhami,
Yuriko Renardy
Abstract:
We present a computational framework to address the flow of two immiscible viscous liquids which co-flow into a shallow rectangular container at one side, and flow out into a holding container at the opposite side. Assumptions based on the shallow depth of the domain are used to reduce the governing equations to one of Hele-Shaw type. The distinctive feature of the numerical method is the accurate…
▽ More
We present a computational framework to address the flow of two immiscible viscous liquids which co-flow into a shallow rectangular container at one side, and flow out into a holding container at the opposite side. Assumptions based on the shallow depth of the domain are used to reduce the governing equations to one of Hele-Shaw type. The distinctive feature of the numerical method is the accurate modeling of the capillary effects. A continuum approach coupled with a volume-of-fluid formulation for computing the interface motion and for modeling the interfacial tension in Hele-Shaw flows is formulated and implemented. The interface is reconstructed with a height-function algorithm. The combination of these algorithms is a novel development for the investigation of Hele-Shaw flows. The order of accuracy and convergence properties of the method are discussed with benchmark simulations. A microfluidic flow of a ribbon of fluid which co-flows with a second liquid is simulated. We show that for small capillary numbers of O(0.01), there is an abrupt change in interface curvature and focusing occurs close to the exit.
△ Less
Submitted 29 August, 2013;
originally announced August 2013.
-
Numerical simulation of ejected molten metal-nanoparticles liquefied by laser irradiation: Interplay of geometry and dewetting
Authors:
S. Afkhami,
L. Kondic
Abstract:
Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approa…
▽ More
Metallic nanoparticles, liquefied by fast laser irradiation, go through a rapid change of shape attempting to minimize their surface energy. The resulting nanodrops may be ejected from the substrate when the mechanisms leading to dewetting are sufficiently strong, as in the experiments involving gold nanoparticles [Habenicht et al., Science 309, 2043 (2005)]. We use a direct continuum-level approach to accurately model the process of liquid nanodrop formation and the subsequent ejection from the substrate. Our computations show a significant role of inertial effects and an elaborate interplay of initial geometry and wetting properties: e.g., we can control the direction of ejection by prescribing appropriate initial shape and/or wetting properties. The basic insight regarding ejection itself can be reached by considering a simple effective model based on an energy balance. We validate our computations by comparing directly with the experiments specified above involving the length scales measured in hundreds of nanometers, and with molecular dynamics simulations on much shorter scales measured in tens of atomic diameters, as in [M. Fuentes-Cabrera et al., Phys. Rev. E 83, 041603 (2011)]. The quantitative agreement, in addition to illustrating how to controlling particle ejection, shows utility of continuum-based simulation in describing dynamics on nanoscale quantitatively, even in a complex setting as considered here.
△ Less
Submitted 28 June, 2013; v1 submitted 6 March, 2013;
originally announced March 2013.