-
An asynchronous discontinuous Galerkin method for massively parallel PDE solvers
Authors:
Shubham Kumar Goswami,
Konduri Aditya
Abstract:
The discontinuous Galerkin (DG) method is widely being used to solve hyperbolic partial differential equations (PDEs) due to its ability to provide high-order accurate solutions in complex geometries, capture discontinuities, and exhibit high arithmetic intensity. However, the scalability of DG-based solvers is impeded by communication bottlenecks arising from the data movement and synchronization…
▽ More
The discontinuous Galerkin (DG) method is widely being used to solve hyperbolic partial differential equations (PDEs) due to its ability to provide high-order accurate solutions in complex geometries, capture discontinuities, and exhibit high arithmetic intensity. However, the scalability of DG-based solvers is impeded by communication bottlenecks arising from the data movement and synchronization requirements at extreme scales. To address these challenges, recent studies have focused on the development of asynchronous computing approaches for PDE solvers. Herein, we introduce the asynchronous DG (ADG) method, which combines the benefits of the DG method with asynchronous computing to overcome communication bottlenecks. The ADG method relaxes the need for data communication and synchronization at a mathematical level, allowing processing elements to operate independently regardless of the communication status, thus potentially improving the scalability of solvers. The proposed ADG method ensures flux conservation and effectively addresses challenges arising from asynchrony. To assess its stability, Fourier-mode analysis is employed to examine the dissipation and dispersion behavior of fully-discrete equations that use the DG and ADG schemes along with the Runge-Kutta (RK) time integration scheme. Furthermore, an error analysis within a statistical framework is presented, which demonstrates that the ADG method with standard numerical fluxes achieves at most first-order accuracy. To recover accuracy, we introduce asynchrony-tolerant (AT) fluxes that utilize data from multiple time levels. Extensive numerical experiments were conducted to validate the performance of the ADG-AT scheme for both linear and nonlinear problems.
△ Less
Submitted 5 April, 2024; v1 submitted 4 April, 2024;
originally announced April 2024.
-
HI 21 cm observations and dynamical models of superthin galaxies
Authors:
K Aditya
Abstract:
The primary objective of this thesis is to identify the key dynamical mechanisms responsible for the superthin stellar discs. We use HI 21cm radio-synthesis observations and stellar photometry to construct detailed dynamical models of a sample of superthin galaxies to determine the primary mechanism responsible for the existence of superthin stellar discs in these galaxies. Our study is based on a…
▽ More
The primary objective of this thesis is to identify the key dynamical mechanisms responsible for the superthin stellar discs. We use HI 21cm radio-synthesis observations and stellar photometry to construct detailed dynamical models of a sample of superthin galaxies to determine the primary mechanism responsible for the existence of superthin stellar discs in these galaxies. Our study is based on a sample of superthin galaxies with $\rm 10< a/b < 16$ for which H1 21cm radio-synthesis data were already available in the literature. In addition, we had the two thinnest galaxies in our sample with $\rm a/b \sim 21$, for which we carried out Giant Meterwave Radio Telescope (GMRT) 21cm radio-synthesis observations. To identify the physical mechanism primarily responsible for the superthin vertical structure, we carry out a Principal Component Analysis of the following dynamical parameters: 1) Dark matter dominance at inner galactocentric radii given by $V_{\rm{rot}}/{(R_{c}/R_{d})}$, 2) the ratio of the vertical-to-radial stellar velocity dispersion $(σ_{z,s}/σ_{R,s})$, 3) Disc dynamical stability against local axisymmetric perturbations $Q_{RW}$, 4) Specific angular momentum of the disc $(j_{*})$, along with $a/b$ for all superthins and the extremely thin galaxies. We note that the first two principal components explain $\sim$ 80$\%$ of the variation in the data, and the major contributions are from $a/b$, $Q_{RW}$ and $V_{\rm{rot}}/{(R_{c}/R_{d})}$. This possibly indicates that high values of the disc dynamical stability and dark matter dominance at inner galactocentric radii are fundamentally responsible for the superthin stellar discs.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
\HI{} 21cm observations and dynamical modelling of the thinnest galaxy: FGC 2366
Authors:
K. Aditya,
Arunima Banerjee,
Peter Kamphuis,
Aleksandr Mosenkov,
Dmitry Makarov,
Sviatoslav Borisov
Abstract:
Superthin galaxies are bulgeless low surface brightness galaxies with unusually high major-to-minor axes ratio of the stellar disc, i.e.,$10<a/b<20$. We present Giant Metrewave Radio Telescope (GMRT) \HI{} 21cm radio-synthesis observations of FGC 2366, the thinnest galaxy known with $a/b=21.6$. Employing the 3-D tilted-ring modelling using Fully Automated TiRiFiC (FAT), we determine the structure…
▽ More
Superthin galaxies are bulgeless low surface brightness galaxies with unusually high major-to-minor axes ratio of the stellar disc, i.e.,$10<a/b<20$. We present Giant Metrewave Radio Telescope (GMRT) \HI{} 21cm radio-synthesis observations of FGC 2366, the thinnest galaxy known with $a/b=21.6$. Employing the 3-D tilted-ring modelling using Fully Automated TiRiFiC (FAT), we determine the structure and kinematics of the \HI{} gas disc, obtaining an asymptotic rotational velocity equal to 100 \kms and a total \HI{} mass equal to 10$^9 M_{\odot}$. Using $z$-band stellar photometry, we obtain a central surface brightness of 22.8 mag ${\rm{arcsec}}^{-2}$, a disc scale length of 2.6 kpc, and a scaleheight of 260 pc. Next, we determine the dark matter density profile by constructing a mass model and find that an NFW dark matter halo best fits the steeply-rising rotation curve. With the above mass inventory in place, we finally construct the dynamical model of the stellar disc of FGC 2366 using the stellar dynamical code "AGAMA". To identify the key physical mechanisms responsible for the superthin vertical structure, we carry out a Principal Component Analysis of the data corresponding to all the relevant dynamical parameters and $a/b$ for a sample of superthin and extremely thin galaxies studied so far. We note that the first two principal components explain 80$\%$ of the variation in the data, and the significant contribution is from the compactness of the mass distribution, which is fundamentally responsible for the existence of superthin stellar discs.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
A co-kurtosis PCA based dimensionality reduction with nonlinear reconstruction using neural networks
Authors:
Dibyajyoti Nayak,
Anirudh Jonnalagadda,
Uma Balakrishnan,
Hemanth Kolla,
Konduri Aditya
Abstract:
For turbulent reacting flows, identification of low-dimensional representations of the thermo-chemical state space is vitally important, primarily to significantly reduce the computational cost of device-scale simulations. Principal component analysis (PCA), and its variants, is a widely employed class of methods. Recently, an alternative technique that focuses on higher-order statistical interact…
▽ More
For turbulent reacting flows, identification of low-dimensional representations of the thermo-chemical state space is vitally important, primarily to significantly reduce the computational cost of device-scale simulations. Principal component analysis (PCA), and its variants, is a widely employed class of methods. Recently, an alternative technique that focuses on higher-order statistical interactions, co-kurtosis PCA (CoK-PCA), has been shown to effectively provide a low-dimensional representation by capturing the stiff chemical dynamics associated with spatiotemporally localized reaction zones. While its effectiveness has only been demonstrated based on a priori analysis with linear reconstruction, in this work, we employ nonlinear techniques to reconstruct the full thermo-chemical state and evaluate the efficacy of CoK-PCA compared to PCA. Specifically, we combine a CoK-PCA/PCA based dimensionality reduction (encoding) with an artificial neural network (ANN) based reconstruction (decoding) and examine a priori the reconstruction errors of the thermo-chemical state. In addition, we evaluate the errors in species production rates and heat release rates that are nonlinear functions of the reconstructed state as a measure of the overall accuracy of the dimensionality reduction technique. We employ four datasets to assess CoK-PCA/PCA coupled with ANN-based reconstruction: a homogeneous reactor for autoignition of an ethylene/air mixture that has conventional single-stage ignition kinetics, a dimethyl ether (DME)/air mixture which has two-stage ignition kinetics, a one-dimensional freely propagating premixed ethylene/air laminar flame, and a two-dimensional homogeneous charge compression ignition of ethanol. The analyses demonstrate the robustness of the CoK-PCA based low-dimensional manifold with ANN reconstruction in accurately capturing the data, specifically from the reaction zones.
△ Less
Submitted 6 July, 2023;
originally announced July 2023.
-
Stability of galaxies across morphological sequence
Authors:
K. Aditya
Abstract:
We investigate the stability of nearby disc galaxies and galaxies at redshift ($z$) equal to 4.5. We explore the connection between the stability parameter $(Q_{RW})$, star formation rate ($SFR$), gas fraction $(f^{Gas})$, and the time scale for growth of gravitational instabilities $(τ)$. We find that, despite differences in morphology $91$ $\%$ of the nearby galaxies have a minimum value of stab…
▽ More
We investigate the stability of nearby disc galaxies and galaxies at redshift ($z$) equal to 4.5. We explore the connection between the stability parameter $(Q_{RW})$, star formation rate ($SFR$), gas fraction $(f^{Gas})$, and the time scale for growth of gravitational instabilities $(τ)$. We find that, despite differences in morphology $91$ $\%$ of the nearby galaxies have a minimum value of stability parameter ($Q^{Min}_{RW}$) greater than $1$ indicating stability against the growth of axisymmetric instabilities. The spirals in our sample have higher median star formation rate, lower median $Q_{RW}$, a lower $f^{Gas}$ and small time scale for growth of gravitational instabilities than irregular galaxies. We find that the gravitational instabilities in spirals convert a large fraction of gas into stars quickly, depleting the gas reservoirs. On the other hand, star formation occurs more gradually over longer timescales in irregulars with a higher gas fraction. We then compare the stability of the nearby galaxies with galaxies at $z\,=\,4.5$. We find that net stability levels in the nearby galaxies and the galaxies at $z\,=\,4.5$ are primarily driven by the stellar disc suggesting the presence of an inherent mechanism that self-regulates the stability. Finally, upon removing the contribution of the dark matter to the total potential, the median $Q_{RW}$ for the nearby galaxies and galaxies at $z \,= \,4.5$ remains unchanged indicating that the baryons can self-regulate the stability levels, at least in a statistical sense.
△ Less
Submitted 16 April, 2023;
originally announced April 2023.
-
Level Set Restricted Voronoi Tessellation for Large scale Spatial Statistical Analysis
Authors:
Tyson Neuroth,
Martin Rieth,
Konduri Aditya,
Myoungkyu Lee,
Jacqueline H Chen,
Kwan-Liu Ma
Abstract:
Spatial statistical analysis of multivariate volumetric data can be challenging due to scale, complexity, and occlusion. Advances in topological segmentation, feature extraction, and statistical summarization have helped overcome the challenges. This work introduces a new spatial statistical decomposition method based on level sets, connected components, and a novel variation of the restricted cen…
▽ More
Spatial statistical analysis of multivariate volumetric data can be challenging due to scale, complexity, and occlusion. Advances in topological segmentation, feature extraction, and statistical summarization have helped overcome the challenges. This work introduces a new spatial statistical decomposition method based on level sets, connected components, and a novel variation of the restricted centroidal Voronoi tessellation that is better suited for spatial statistical decomposition and parallel efficiency. The resulting data structures organize features into a coherent nested hierarchy to support flexible and efficient out-of-core region-of-interest extraction. Next, we provide an efficient parallel implementation. Finally, an interactive visualization system based on this approach is designed and then applied to turbulent combustion data. The combined approach enables an interactive spatial statistical analysis workflow for large-scale data with a top-down approach through multiple-levels-of-detail that links phase space statistics with spatial features.
△ Less
Submitted 14 August, 2022;
originally announced August 2022.
-
A co-kurtosis based dimensionality reduction method for combustion datasets
Authors:
Anirudh Jonnalagadda,
Shubham P. Kulkarni,
Akash Rodhiya,
Hemanth Kolla,
Konduri Aditya
Abstract:
Principal Component Analysis (PCA) is a dimensionality reduction technique widely used to reduce the computational cost associated with numerical simulations of combustion phenomena. However, PCA, which transforms the thermo-chemical state space based on eigenvectors of co-variance of the data, could fail to capture information regarding important localized chemical dynamics, such as the formation…
▽ More
Principal Component Analysis (PCA) is a dimensionality reduction technique widely used to reduce the computational cost associated with numerical simulations of combustion phenomena. However, PCA, which transforms the thermo-chemical state space based on eigenvectors of co-variance of the data, could fail to capture information regarding important localized chemical dynamics, such as the formation of ignition kernels, appearing as \rev{extreme-valued} samples in a dataset. In this paper, we propose an alternate dimensionality reduction procedure, co-kurtosis PCA (CoK-PCA), wherein the required principal vectors are computed from a high-order joint statistical moment, namely the co-kurtosis tensor, which may better identify directions in the state space that represent stiff dynamics. We first demonstrate the potential of the proposed CoK-PCA method using a synthetically generated dataset that is representative of typical combustion simulations. Thereafter, we characterize and contrast the accuracy of CoK-PCA against PCA for datasets representing spontaneous ignition of premixed ethylene-air in a simple homogeneous reactor and ethanol-fueled homogeneous charged compression ignition (HCCI) engine. Specifically, we compare the low-dimensional manifolds in terms of reconstruction errors of the original thermo-chemical state, and species production and heat release rates computed from the reconstructed state. \rev{The latter -- a comparison of species production and heat release rates -- is a more rigorous assessment of the accuracy of dimensionality reduction.} We find that, even using a simplistic linear reconstruction, the co-kurtosis based reduced manifold represents the original thermo-chemical state more accurately than PCA, especially in the regions where chemical reactions are important.
△ Less
Submitted 28 September, 2022; v1 submitted 21 April, 2022;
originally announced April 2022.
-
Evaluation of finite difference based asynchronous partial differential equations solver for reacting flows
Authors:
Komal Kumari,
Emmet Cleary,
Swapnil Desai,
Diego A. Donzis,
Jacqueline H. Chen,
Konduri Aditya
Abstract:
Next-generation exascale machines with extreme levels of parallelism will provide massive computing resources for large scale numerical simulations of complex physical systems at unprecedented parameter ranges. However, novel numerical methods, scalable algorithms and re-design of current state-of-the art numerical solvers are required for scaling to these machines with minimal overheads. One such…
▽ More
Next-generation exascale machines with extreme levels of parallelism will provide massive computing resources for large scale numerical simulations of complex physical systems at unprecedented parameter ranges. However, novel numerical methods, scalable algorithms and re-design of current state-of-the art numerical solvers are required for scaling to these machines with minimal overheads. One such approach for partial differential equations based solvers involves computation of spatial derivatives with possibly delayed or asynchronous data using high-order asynchrony-tolerant (AT) schemes to facilitate mitigation of communication and synchronization bottlenecks without affecting the numerical accuracy. In the present study, an effective methodology of implementing temporal discretization using a multi-stage Runge-Kutta method with AT schemes is presented. Together these schemes are used to perform asynchronous simulations of canonical reacting flow problems, demonstrated in one-dimension including auto-ignition of a premixture, premixed flame propagation and non-premixed autoignition. Simulation results show that the AT schemes incur very small numerical errors in all key quantities of interest including stiff intermediate species despite delayed data at processing element (PE) boundaries. For simulations of supersonic flows, the degraded numerical accuracy of well-known shock-resolving WENO (weighted essentially non-oscillatory) schemes when used with relaxed synchronization is also discussed. To overcome this loss of accuracy, high-order AT-WENO schemes are derived and tested on linear and non-linear equations. Finally the novel AT-WENO schemes are demonstrated in the propagation of a detonation wave with delays at PE boundaries.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
HI 21 cm observation and mass models of the extremely thin galaxy FGC 1440
Authors:
K. Aditya,
Peter Kamphuis,
Arunima Banerjee,
Sviatoslav Borisov,
Aleksandr Mosenkov,
Aleksandra Antipova,
Dmitry Makarov
Abstract:
We present observations and models of the kinematics and distribution of neutral hydrogen (HI) in the superthin galaxy FGC 1440 with an optical axial ratio $a/b = 20.4$. Using the Giant Meterwave Radio telescope (GMRT), we imaged the galaxy with a spectral resolution of 1.7 $\rm kms^{-1}$ and a spatial resolution of $15" \times 13.5"$. We find that FGC 1440 has an asymptotic rotational velocity of…
▽ More
We present observations and models of the kinematics and distribution of neutral hydrogen (HI) in the superthin galaxy FGC 1440 with an optical axial ratio $a/b = 20.4$. Using the Giant Meterwave Radio telescope (GMRT), we imaged the galaxy with a spectral resolution of 1.7 $\rm kms^{-1}$ and a spatial resolution of $15" \times 13.5"$. We find that FGC 1440 has an asymptotic rotational velocity of 141.8 $\rm kms^{-1}$ . The structure of the HI disc in FGC 1440 is that of a typical thin disc warped along the line of sight, but we can not rule out the presence of a central thick HI disc. We find that the dark matter halo in FGC 1440 could be modeled by a pseudo-isothermal (PIS) profile with $\rm R_{c}/ R_{d} <2$, where $R_{c}$ is the core radius of the PIS halo and $R_{d}$ the exponential stellar disc scale length. We note that in spite of the unusually large axial ratio of FGC 1440, the ratio of the rotational velocity to stellar vertical velocity dispersion, $\frac{V_{Rot}}{σ_{z}} \sim 5 - 8$, which is comparable to other superthins. Interestingly, unlike previously studied superthin galaxies which are outliers in the $log_{10}(j_{*}) - log_{10}(M_{*})$ relation for ordinary bulgeless disc galaxies, FGC 1440 is found to comply with the same. The values of $j$ for the stars, gas and the baryons in FGC 1440 are consistent with those of normal spiral galaxies with similar mass.
△ Less
Submitted 28 October, 2021;
originally announced October 2021.
-
Dynamical modelling of disc vertical structure in superthin galaxy `UGC 7321' in braneworld gravity: An MCMC study
Authors:
K. Aditya,
Indrani Banerjee,
Arunima Banerjee,
Soumitra SenGupta
Abstract:
Low surface brightness (LSBs) superthins constitute classic examples of very late-type galaxies, with their disc dynamics strongly regulated by their dark matter halos. In this work we consider a gravitational origin of dark matter in the brane world scenario, where the higher dimensional Weyl stress term projected onto the 3-brane acts as the source of dark matter. In the context of the braneworl…
▽ More
Low surface brightness (LSBs) superthins constitute classic examples of very late-type galaxies, with their disc dynamics strongly regulated by their dark matter halos. In this work we consider a gravitational origin of dark matter in the brane world scenario, where the higher dimensional Weyl stress term projected onto the 3-brane acts as the source of dark matter. In the context of the braneworld model, this dark matter is referred to as the \emph{`dark mass'}.This model has been successful in reproducing the rotation curves of several low surface brightness and high surface brightness galaxies. Therefore it is interesting to study the prospect of this model in explaining the vertical structure of galaxies which has not been explored in the literature so far. Using our 2-component model of gravitationally-coupled stars and gas in the external force field of this \emph{dark mass}, we fit the observed scale heights of stellar and atomic hydrogen (HI) gas of superthin galaxy `UGC7321' using the Markov Chain Monte Carlo approach. We find that the observed scaleheights of `UGC7321' can be successfully modelled in the context of the braneworld scenario. In addition, the model predicted rotation curve also matches the observed one. The implications on the model parameters are discussed.
△ Less
Submitted 27 September, 2020; v1 submitted 12 April, 2020;
originally announced April 2020.
-
How "cold" are the stellar discs of superthin galaxies?
Authors:
K. Aditya,
Arunima Banerjee
Abstract:
Superthin galaxies are a class of bulgeless, low surface brightness galaxies with strikingly high values of planar-to-vertical axes ratio $\rm(b/a> 10 - 20)$, possibly indicating the presence of an ultra-cold stellar disc. Using the multi-component galactic disc model of gravitationally-coupled stars and gas in the force field of the dark matter halo as well as the stellar dynamical code AGAMA (Ac…
▽ More
Superthin galaxies are a class of bulgeless, low surface brightness galaxies with strikingly high values of planar-to-vertical axes ratio $\rm(b/a> 10 - 20)$, possibly indicating the presence of an ultra-cold stellar disc. Using the multi-component galactic disc model of gravitationally-coupled stars and gas in the force field of the dark matter halo as well as the stellar dynamical code AGAMA (Action-based Galaxy Modelling Architecture), we determine the vertical velocity dispersion of stars and gas as a function of galacto-centric radius for five superthin galaxies (UGC 7321, IC 5249, FGC 1540, IC2233 and UGC00711) using observed stellar and atomic hydrogen (HI) scale heights as constraints, using a Markov Chain Monte Carlo Method. We find that the central vertical velocity dispersion for the stellar disc in the optical band varies between $σ_{0s}$ $\sim$ $10.2 - 18.4$ $\rm{kms}^{-1}$ and falls off with an exponential scale length of $2.6$ to $3.2$ $R_{d}$ where $R_{d}$ is the exponential stellar disc scale length. Interestingly, in the 3.6 $μ$m, the same, averaged over the two components of the stellar disc, varies between $5.9$ to $11.8$ $\rm{kms}^{-1}$, both of which confirm the presence of "ultra-cold" stellar discs in superthin galaxies. Interestingly, the global median of the multi-component disc dynamical stability parameter $Q_N$ of our sample superthins is found to be 5 $\pm$ 1.5, which higher than the global median value of 2.2 $\pm$ 0.6 for a sample of spiral galaxies.
△ Less
Submitted 28 January, 2021; v1 submitted 21 February, 2020;
originally announced February 2020.
-
Diva: A Declarative and Reactive Language for In-Situ Visualization
Authors:
Qi Wu,
Tyson Neuroth,
Oleg Igouchkine,
Konduri Aditya,
Jacqueline H. Chen,
Kwan-Liu Ma
Abstract:
The use of adaptive workflow management for in situ visualization and analysis has been a growing trend in large-scale scientific simulations. However, coordinating adaptive workflows with traditional procedural programming languages can be difficult because system flow is determined by unpredictable scientific phenomena, which often appear in an unknown order and can evade event handling. This ma…
▽ More
The use of adaptive workflow management for in situ visualization and analysis has been a growing trend in large-scale scientific simulations. However, coordinating adaptive workflows with traditional procedural programming languages can be difficult because system flow is determined by unpredictable scientific phenomena, which often appear in an unknown order and can evade event handling. This makes the implementation of adaptive workflows tedious and error-prone. Recently, reactive and declarative programming paradigms have been recognized as well-suited solutions to similar problems in other domains. However, there is a dearth of research on adapting these approaches to in situ visualization and analysis. With this paper, we present a language design and runtime system for develo** adaptive systems through a declarative and reactive programming paradigm. We illustrate how an adaptive workflow programming system is implemented using our approach and demonstrate it with a use case from a combustion simulation.
△ Less
Submitted 6 September, 2020; v1 submitted 30 January, 2020;
originally announced January 2020.
-
A scalable weakly-synchronous algorithm for solving partial differential equations
Authors:
Konduri Aditya,
Tobias Gysi,
Grzegorz Kwasniewski,
Torsten Hoefler,
Diego A. Donzis,
Jacqueline H. Chen
Abstract:
Synchronization overheads pose a major challenge as applications advance towards extreme scales. In current large-scale algorithms, synchronization as well as data communication delay the parallel computations at each time step in a time-dependent partial differential equation (PDE) solver. This creates a new scaling wall when moving towards exascale. We present a weakly-synchronous algorithm base…
▽ More
Synchronization overheads pose a major challenge as applications advance towards extreme scales. In current large-scale algorithms, synchronization as well as data communication delay the parallel computations at each time step in a time-dependent partial differential equation (PDE) solver. This creates a new scaling wall when moving towards exascale. We present a weakly-synchronous algorithm based on novel asynchrony-tolerant (AT) finite-difference schemes that relax synchronization at a mathematical level. We utilize remote memory access programming schemes that have been shown to provide significant speedup on modern supercomputers, to efficiently implement communications suitable for AT schemes, and compare to two-sided communications that are state-of-practice. We present results from simulations of Burgers' equation as a model of multi-scale strongly non-linear dynamical systems. Our algorithm demonstrate excellent scalability of the new AT schemes for large-scale computing, with a speedup of up to $3.3$x in communication time and $2.19$x in total runtime. We expect that such schemes can form the basis for exascale PDE algorithms.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Stability of two-fluid galactic disc under the influence of an external tidal field
Authors:
K. Aditya
Abstract:
We consider the dynamics of rotationally supported thin galactic disc composed of stars and gas under the influence of external tidal field and derive the coupled differential equations governing the evolution of instabilities. Further linearising the governing equation a modified dispersion relation and stability criterion for appraising the stability of the two fluid galactic disc under the infl…
▽ More
We consider the dynamics of rotationally supported thin galactic disc composed of stars and gas under the influence of external tidal field and derive the coupled differential equations governing the evolution of instabilities. Further linearising the governing equation a modified dispersion relation and stability criterion for appraising the stability of the two fluid galactic disc under the influence of external tidal field is obtained. Possible applications and method for the same are discussed.
△ Less
Submitted 26 May, 2019;
originally announced May 2019.
-
A User-centered Design Study in Scientific Visualization Targeting Domain Experts
Authors:
Yucong,
Ye,
Franz Sauer,
Kwan-Liu Ma,
Konduri Aditya,
Jacqueline Chen
Abstract:
The development and design of visualization solutions that are truly usable is essential for ensuring both their adoption and effectiveness. User-centered design principles, which focus on involving users throughout the entire development process, are well suited for visualization and have been shown to be effective in numerous information visualization endeavors. In this paper, we report a two ye…
▽ More
The development and design of visualization solutions that are truly usable is essential for ensuring both their adoption and effectiveness. User-centered design principles, which focus on involving users throughout the entire development process, are well suited for visualization and have been shown to be effective in numerous information visualization endeavors. In this paper, we report a two year long collaboration with combustion scientists that, by applying these design principles, generated multiple results including an in situ visualization technique and a post hoc probability distribution function (PDF) exploration tool. Furthermore, we examine the importance of user-centered design principles and describe lessons learned over the design process in an effort to aid others who also seek to work with scientists for develo** effective and usable scientific visualization solutions.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Anomaly detection in scientific data using joint statistical moments
Authors:
Konduri Aditya,
Hemanth Kolla,
W. Philip Kegelmeyer,
Timothy M. Shead,
Julia Ling,
Warren L. Davis IV
Abstract:
We propose an anomaly detection method for multi-variate scientific data based on analysis of high-order joint moments. Using kurtosis as a reliable measure of outliers, we suggest that principal kurtosis vectors, by analogy to principal component analysis (PCA) vectors, signify the principal directions along which outliers appear. The inception of an anomaly, then, manifests as a change in the pr…
▽ More
We propose an anomaly detection method for multi-variate scientific data based on analysis of high-order joint moments. Using kurtosis as a reliable measure of outliers, we suggest that principal kurtosis vectors, by analogy to principal component analysis (PCA) vectors, signify the principal directions along which outliers appear. The inception of an anomaly, then, manifests as a change in the principal values and vectors of kurtosis. Obtaining the principal kurtosis vectors requires decomposing a fourth order joint cumulant tensor for which we use a simple, computationally less expensive approach that involves performing a singular value decomposition (SVD) over the matricized tensor. We demonstrate the efficacy of this approach on synthetic data, and develop an algorithm to identify the occurrence of a spatial and/or temporal anomalous event in scientific phenomena. The algorithm decomposes the data into several spatial sub-domains and time steps to identify regions with such events. Feature moment metrics, based on the alignments of the principal kurtosis vectors, are computed at each sub-domain and time step for all features to quantify their relative importance towards the overall kurtosis in the data. Accordingly, spatial and temporal anomaly metrics for each sub-domain are proposed using the Hellinger distance of the feature moment metric distribution from a suitable nominal distribution. We apply the algorithm to a one-dimensional turbulent auto-ignition combustion case and demonstrate that the anomaly metrics reliably capture the occurrence of auto-ignition in relevant spatial sub-domains at the right time steps.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
High-order asynchrony-tolerant finite difference schemes for partial differential equations
Authors:
Konduri Aditya,
Diego A. Donzis
Abstract:
Synchronizations of processing elements (PEs) in massively parallel simulations, which arise due to communication or load imbalances between PEs, significantly affect the scalability of scientific applications. We have recently proposed a method based on finite-difference schemes to solve partial differential equations in an asynchronous fashion -- synchronization between PEs is relaxed at a mathe…
▽ More
Synchronizations of processing elements (PEs) in massively parallel simulations, which arise due to communication or load imbalances between PEs, significantly affect the scalability of scientific applications. We have recently proposed a method based on finite-difference schemes to solve partial differential equations in an asynchronous fashion -- synchronization between PEs is relaxed at a mathematical level. While standard schemes can maintain their stability in the presence of asynchrony, their accuracy is drastically affected. In this work, we present a general methodology to derive asynchrony-tolerant (AT) finite difference schemes of arbitrary order of accuracy, which can maintain their accuracy when synchronizations are relaxed. We show that there are several choices available in selecting a stencil to derive these schemes and discuss their effect on numerical and computational performance. We provide a simple classification of schemes based on the stencil and derive schemes that are representative of different classes. Their numerical error is rigorously analyzed within a statistical framework to obtain the overall accuracy of the solution. Results from numerical experiments are used to validate the performance of the schemes.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
