-
Graphene-based thermopneumatic generator for on-board pressure supply of soft robots
Authors:
Armin Reimers,
Jannik Rank,
Erik Greve,
Morten Möller,
Sören Kaps,
Jörg Bahr,
Rainer Adelung,
Fabian Schütt
Abstract:
Various fields, including medical and human interaction robots, gain advantages from the development of bioinspired soft actuators. Many recently developed grippers are pneumatics that require external pressure supply systems, thereby limiting the autonomy of these robots. This necessitates the development of scalable and efficient on-board pressure generation systems. While conventional air compr…
▽ More
Various fields, including medical and human interaction robots, gain advantages from the development of bioinspired soft actuators. Many recently developed grippers are pneumatics that require external pressure supply systems, thereby limiting the autonomy of these robots. This necessitates the development of scalable and efficient on-board pressure generation systems. While conventional air compression systems are hard to miniaturize, thermopneumatic systems that joule-heat a transducer material to generate pressure present a promising alternative. However, the transducer materials of previously reported thermopneumatic systems demonstrate high heat capacities and limited surface area resulting in long response times and low operation frequencies. This study presents a thermopneumatic pressure generator using aerographene, a highly porous (>99.99 %) network of interconnected graphene microtubes, as lightweight and low heat capacity transducer material. An aerographene pressurizer module (AGPM) can pressurize a reservoir of 4.2 cm3 to about ~140 mbar in 50 ms. Periodic operation of the AGPM for 10 s at 0.66 Hz can further increase the pressure in the reservoir to ~360 mbar. It is demonstrated that multiple AGPMs can be operated parallelly or in series for improved performance. For example, three parallelly operated AGPMs can generate pressure pulses of ~215 mbar. Connecting AGPMs in series increases the maximum pressure achievable by the system. It is shown that three AGPMs working in series can pressurize the reservoir to ~2000 mbar in about 2.5 min. The AGPM's minimalistic design can be easily adapted to circuit boards, making the concept a promising fit for the on-board pressure supply of soft robots.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Functional light diffusers based on hybrid CsPbBr$_3$/SiO$_2$ aero-framework structures for laser light illumination and conversion
Authors:
Lena M. Saure,
Jonas Lumma,
Niklas Kohlmann,
Torge Hartig,
Ercules E. S. Teotonio,
Shwetha Shetty,
Narayanan Ravishankar,
Lorenz Kienle,
Franz Faupel,
Stefan Schröder,
Rainer Adelung,
Huayna Terraschke,
Fabian Schütt
Abstract:
The new generation of laser-based solid-state lighting (SSL) white light sources requires new material systems capable of withstanding, diffusing and converting high intensity laser light. State-of-the-art systems use a blue light emitting diode (LED) or laser diode (LD) in combination with color conversion materials, such as yellow emitting Ce-doped phosphors or red and green emitting quantum dot…
▽ More
The new generation of laser-based solid-state lighting (SSL) white light sources requires new material systems capable of withstanding, diffusing and converting high intensity laser light. State-of-the-art systems use a blue light emitting diode (LED) or laser diode (LD) in combination with color conversion materials, such as yellow emitting Ce-doped phosphors or red and green emitting quantum dots (QD), to produce white light. However, for laser-based high-brightness illumination in particular, thermal management is a major challenge, and in addition, a light diffuser is required to diffuse the highly focused laser beam. Here, we present a hybrid material system that simultaneously enables efficient, uniform light distribution and color conversion of a blue LD, while ensuring good thermal management even at high laser powers of up to 5W. A highly open porous (> 99%) framework structure of hollow SiO$_2$ microtubes is utilized as an efficient light diffuser that can drastically reduce speckle contrast. By further functionalizing the microtubes with halide perovskite QDs (SiO$_2$@CsPbBr$_3$ as model system) color conversion from UV to visible light is achieved. Under laser illumination, the open porous structure prevents heat accumulation and thermal quenching of the QDs. By depositing an ultrathin (~ 5.5 nm) film of poly(ethylene glycol dimethyl acrylate) (pEGDMA) via initiated chemical vapor deposition (iCVD), the luminescent stability of the QDs against moisture is enhanced. The demonstrated hybrid material system paves the way for the design of advanced and functional laser light diffusers and converters that can meet the challenges associated with laser-based SSL applications.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Multifunctional, Self-Cleaning Air Filters Based on Graphene-Enhanced Ceramic Networks
Authors:
Armin Reimers,
Ala Bouhanguel,
Erik Greve,
Morten Möller,
Lena Marie Saure,
Sören Kaps,
Lasse Wegner,
Ali Shaygan Nia,
Xinliang Feng,
Fabian Schütt,
Yves Andres,
Rainer Adelung
Abstract:
Particulate air pollution is taking a huge toll on modern society, being associated with more than three million deaths per year. In addition, airborne infectious microorganism can spread dangerous diseases, further elevating the problem. A common way to mitigate the risks of airborne particles is by air filtration. However, conventional air filters usually do not provide any functionality beyond…
▽ More
Particulate air pollution is taking a huge toll on modern society, being associated with more than three million deaths per year. In addition, airborne infectious microorganism can spread dangerous diseases, further elevating the problem. A common way to mitigate the risks of airborne particles is by air filtration. However, conventional air filters usually do not provide any functionality beyond particle removal. They are unable to inactivate accumulated contaminants and therefore need periodic maintenance and replacement to remain operational and safe. This work presents a multifunctional, self-cleaning air filtration system which utilizes a novel graphene-enhanced air filter medium (GeFM). The hybrid network of the GeFM combines the passive structure-based air filtration properties of an underlying ceramic network with additional active features based on the functional properties of a graphene thin film. The GeFM is able to capture >95 % of microorganisms and particles larger than 1 $μ$m and can be repetitively Joule-heated to >300 °C for several hours without signs of degradation. Hereby, built-up organic particulate matter and microbial contaminants are effectively decomposed, regenerating the GeFM. Additionally, the GeFM provides unique options to monitor the filter's air troughput and loading status during operation. The active features of the GeFM can drastically improve filter life-time and safety, offering great potential for the development of safer and more sustainable air filtration solutions to face the future challenges of air pollution and pandemics.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Hybrid aeromaterials for enhanced and rapid volumetric photothermal response
Authors:
Lena M. Saure,
Niklas Kohlmann,
Haoyi Qiu,
Shwetha Shetty,
Ali Shaygan Nia,
Narayanan Ravishankar,
Xinliang Feng,
Alexander Szameit,
Lorenz Kienle,
Rainer Adelung,
Fabian Schütt
Abstract:
Conversion of light into heat is essential for a broad range of technologies such as solar thermal heating, catalysis and desalination. Three-dimensional (3D) carbon nanomaterial-based aerogels have shown to hold great promise as photothermal transducer materials. However, till now, their light-to-heat conversion is limited by surface-near absorption, resulting in a strong heat localization only a…
▽ More
Conversion of light into heat is essential for a broad range of technologies such as solar thermal heating, catalysis and desalination. Three-dimensional (3D) carbon nanomaterial-based aerogels have shown to hold great promise as photothermal transducer materials. However, till now, their light-to-heat conversion is limited by surface-near absorption, resulting in a strong heat localization only at the illuminated surface region, while most of the aerogel volume remains unused. We present an innovative fabrication concept for highly porous (>99.9%) photothermal hybrid aeromaterials, that enable an ultra-rapid and volumetric photothermal response with an enhancement by a factor of around 2.5 compared to the pristine variant. The hybrid aeromaterial is based on strongly light-scattering framework structures composed of interconnected hollow silicon dioxide (SiO${_2}$) microtubes, which are functionalized with extremely low amounts (in order of a few $μ$g cm${^-}$${^3}$) of reduced graphene oxide (rGO) nanosheets, acting as photothermal agents. Tailoring the density of rGO within the framework structure enables us to control both, light scattering and light absorption, and thus the volumetric photothermal response. We further show that by rapid and repeatable gas activation these transducer materials expand the field of photothermal applications, like untethered light-powered and -controlled microfluidic pumps and soft pneumatic actuators.
△ Less
Submitted 12 June, 2023; v1 submitted 24 March, 2023;
originally announced March 2023.
-
Overcoming water diffusion limitations in hydrogels via microtubular graphene networks for soft actuators
Authors:
Margarethe Hauck,
Lena M. Saure,
Berit Zeller-Plumhoff,
Sören Kaps,
Jörg Hammel,
Caprice Mohr,
Lena Rieck,
Ali Shaygan Nia,
Xinliang Feng,
Nicola M. Pugno,
Rainer Adelung,
Fabian Schütt
Abstract:
Hydrogel-based soft actuators can operate in sensitive environments, bridging the gap of rigid machines interacting with soft matter. However, while stimuli-responsive hydrogels can undergo extreme reversible volume changes of up to ~90%, water transport in hydrogel actuators is in general limited by their poroelastic behavior. For poly(N-isopropylacrylamide) (PNIPAM) the actuation performance is…
▽ More
Hydrogel-based soft actuators can operate in sensitive environments, bridging the gap of rigid machines interacting with soft matter. However, while stimuli-responsive hydrogels can undergo extreme reversible volume changes of up to ~90%, water transport in hydrogel actuators is in general limited by their poroelastic behavior. For poly(N-isopropylacrylamide) (PNIPAM) the actuation performance is even further compromised by the formation of a dense skin layer. Here we show, that incorporating a bioinspired microtube graphene network into a PNIPAM matrix with a total porosity of only 5.4 % dramatically enhances actuation dynamics by up to ~400 % and actuation stress by ~4000 % without sacrificing the mechanical stability, overcoming the water transport limitations. The graphene network provides both untethered light-controlled and electrically-powered actuation. We anticipate that the concept provides a versatile platform for enhancing the functionality of soft matter by combining responsive and two-dimensional materials, paving the way towards designing soft intelligent matter.
△ Less
Submitted 24 March, 2023;
originally announced March 2023.
-
Strain-invariant, highly water stable all-organic soft conductors based on ultralight multi-layered foam-like framework structures
Authors:
Igor Barg,
Niklas Kohlmann,
Florian Rasch,
Thomas Strunskus,
Rainer Adelung,
Lorenz Kienle,
Franz Faupel,
Stefan Schröder,
Fabian Schütt
Abstract:
Soft and flexible conductors are essential in the development of soft robots, wearable electronics, as well as electronic tissue and implants. However, conventional soft conductors are inherently characterized by a large change in conductance upon mechanical deformation or under alternating environmental conditions, e.g., humidity, drastically limiting their application potential and performance.…
▽ More
Soft and flexible conductors are essential in the development of soft robots, wearable electronics, as well as electronic tissue and implants. However, conventional soft conductors are inherently characterized by a large change in conductance upon mechanical deformation or under alternating environmental conditions, e.g., humidity, drastically limiting their application potential and performance. Here, we demonstrate a novel concept for the development of strain-invariant, fatigue resistant and highly water stable soft conductor. By combining different thin film technologies in a three-dimensional fashion, we develop nano- and micro-engineered, multi-layered (< 50 nm), ultra-lightweight (< 15 mg/cm$^3$) foam-like composite framework structures based on PEDOT:PSS and PTFE. The all-organic composite framework structures are characterized by conductivities of up to 184 S/m, remaining strain-invariant between 80 % compressive and 25 % tensile strain. We further show, that the multi-layered composites are characterized by properties that surpass that of framework structures based on the individual materials. Both, the initial electrical and mechanical properties of the composite framework structures are retained during long-term cycling, even after 2000 cycles at 50 % compression. Furthermore, the PTFE functionalization renders the framework structure highly hydrophobic, resulting in stable electrical properties, even when immersed in water for up to 30 days. The here presented concept overcomes the previous limitations of strain-invariant soft conductors and demonstrates for the first time a versatile approach for the development of innovative multi-scaled and multi-layered functional materials, for applications in soft electronics, energy storage and conversion, sensing, catalysis, water and air purification, as well as biomedicine.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Microbiome and metabolome insights into the role of the gastrointestinal-brain axis in neurodegenerative diseases: unveiling potential therapeutic targets
Authors:
Helena U. Zacharias,
Christoph Kaleta,
Francois Cossais,
Eva Schaeffer,
Henry Berndt,
Lena Best,
Thomas Dost,
Svea Glüsing,
Mathieu Groussin,
Mathilde Poyet,
Sebastian Heinzel,
Corinna Bang,
Leonard Siebert,
Tobias Demetrowitsch,
Frank Leypoldt,
Rainer Adelung,
Thorsten Bartsch,
Anja Bosy-Westphal,
Karin Schwarz,
Daniela Berg
Abstract:
Due to the aging of the world population and westernization of lifestyles, the prevalence of neurodegenerative diseases such as Alzheimer's disease (AD) and Parkinson's disease (PD) is rapidly rising and is expected to put a strong socioeconomic burden on health systems worldwide. Due to the limited success of clinical trials of therapies against neurodegenerative diseases, research has extended i…
▽ More
Due to the aging of the world population and westernization of lifestyles, the prevalence of neurodegenerative diseases such as Alzheimer's disease (AD) and Parkinson's disease (PD) is rapidly rising and is expected to put a strong socioeconomic burden on health systems worldwide. Due to the limited success of clinical trials of therapies against neurodegenerative diseases, research has extended its scope to a systems medicine point of view, with a particular focus on the gastrointestinal-brain axis as a potential main actor in disease development and progression. Microbiome as well as metabolome studies along the gastrointestinal-brain axis have already revealed important insights into disease pathomechanisms. Both the microbiome and metabolome can be easily manipulated by dietary and lifestyle interventions, and might thus offer novel, readily available therapeutic options to prevent the onset as well as the progression of PD and AD. This review summarizes our current knowledge on the association between microbiota, metabolites, and neurodegeneration in light of the gastrointestinal-brain axis. In this context, we also illustrate state-of-the art methods of microbiome and metabolome research as well as metabolic modeling that facilitate the identification of disease pathomechanisms. We conclude our review with therapeutic options to modulate microbiome composition to prevent or delay neurodegeneration and illustrate potential future research directions to fight PD and AD.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Wetting Properties of Graphene Aerogels
Authors:
Francesco De Nicola,
Ilenia Viola,
Lorenzo Donato Tenuzzo,
Florian Rasch,
Martin R. Lohe,
Ali Shaygan Nia,
Fabian Schütt,
Xinliang Feng,
Rainer Adelung,
Stefano Lupi
Abstract:
Graphene hydrophobic coatings paved the way towards a new generation of optoelectronic and fluidic devices. Nevertheless, such hydrophobic thin films rely only on graphene non-polar surface, rather than taking advantage of its surface roughness. Furthermore, graphene is typically not self-standing. Differently, carbon aerogels have high porosity, large effective surface area due to their surface r…
▽ More
Graphene hydrophobic coatings paved the way towards a new generation of optoelectronic and fluidic devices. Nevertheless, such hydrophobic thin films rely only on graphene non-polar surface, rather than taking advantage of its surface roughness. Furthermore, graphene is typically not self-standing. Differently, carbon aerogels have high porosity, large effective surface area due to their surface roughness, and very low mass density, which make them a promising candidate as a super-hydrophobic material for novel technological applications. However, despite a few works reporting the general super-hydrophobic and lipophilic behavior of the carbon aerogels, a detailed characterization of their wetting properties is still missing, to date. Here, the wetting properties of graphene aerogels are demonstrated in detail. Without any chemical functionalization or patterning of their surface, the samples exhibit a super-lipophilic state and a stationary super-hydrophobic state with a contact angle up to $150\pm15^°$ and low contact angle hysteresis $\approx15^°$, owing to the fakir effect. In addition, the adhesion force of the graphene aerogels in contact with the water droplets and their surface tension are evaluated. For instance, the unique wettability and enhanced liquid absorption of the graphene aerogels can be exploited for reducing contamination from oil spills and chemical leakage accidents.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Determining superhydrophobic surfaces from an expanded Cassie Baxter equation describing simple wettability experiments
Authors:
Soeren Kaps,
Rainer Adelung,
Michael Scharnberg,
Franz Faupel,
Srdjan Milenkovic,
Achim Walter Hassel
Abstract:
The characterization of the wetting on superhydrophobic surfaces is rather complex. Usual contact angle experiments are difficult to perform and the lateral movement of droplets as well as the pinning at point defects on the surface can disturb the measurements. Even if precise contact angle measurements can be performed the information gain is limited if the surface is heterogeneously wetted. Thi…
▽ More
The characterization of the wetting on superhydrophobic surfaces is rather complex. Usual contact angle experiments are difficult to perform and the lateral movement of droplets as well as the pinning at point defects on the surface can disturb the measurements. Even if precise contact angle measurements can be performed the information gain is limited if the surface is heterogeneously wetted. This results in the possibility of two surfaces with different roughness, different surface energy and thus different underlying wetting mechanisms exhibiting the same contact angle. We introduce the utilization of dynamic wetting experiments as an additional surface probe which allows a better characterization of superhydrophobic surfaces. A theoretical model is presented which describes the spreading of water jets on a superhydrophobic surface and allows the determination of the wetted fraction of a heterogeneously wetted superhydrophobic surface. The determined values for the wetted fraction identify a common problem when building artificial super hydrophobic surfaces and can fundamentally improve their understanding.
△ Less
Submitted 22 August, 2014;
originally announced August 2014.
-
Direct comparison between potential landscape and local density of states in a disordered two-dimensional electron system
Authors:
M. Morgenstern,
J. Klijn,
Chr. Meyer,
M. Getzlaff,
R. Adelung,
R. A. Roemer,
K. Rossnagel,
L. Kipp,
M. Skibowski,
R. Wiesendanger
Abstract:
The local density of states (LDOS) of the adsorbate induced two-dimensional electron system (2DES) on n-InAs(110) is studied by low-temperature scanning tunneling spectroscopy. The LDOS exhibits irregular structures with fluctuation lengths decreasing with increasing energy. Fourier transformation reveals that the k-values of the unperturbed 2DES dominate the LDOS, but additional lower k-values…
▽ More
The local density of states (LDOS) of the adsorbate induced two-dimensional electron system (2DES) on n-InAs(110) is studied by low-temperature scanning tunneling spectroscopy. The LDOS exhibits irregular structures with fluctuation lengths decreasing with increasing energy. Fourier transformation reveals that the k-values of the unperturbed 2DES dominate the LDOS, but additional lower k-values contribute significantly. To clarify the origin of the additional k-space intensity, we measure the potential landscape of the same 2DES area with the help of the tip induced quantum dot. This allows to calculate the expected LDOS from the single particle Schroedinger equation and to directly compare it with the measured one. Reasonable correspondance between calculated and measured LDOS is found.
△ Less
Submitted 14 February, 2002;
originally announced February 2002.
-
Electronic structure of quasi free 2 dimensional HfS_2 clusters
Authors:
M. Traving,
C. Kreis,
R. Adelung,
L. Kipp,
M. Skibowski
Abstract:
Cluster research so far only dealt with either 3D free clusters or clusters on substrates with strong electronic coupling at the interface. Preparation of free and orientated 2D clusters is usually not possible because one of these conditions generally excludes the other. We demonstrate a new way to grow 2D clusters of transition metal dichalcogenides which are only weakly bound to the substrate…
▽ More
Cluster research so far only dealt with either 3D free clusters or clusters on substrates with strong electronic coupling at the interface. Preparation of free and orientated 2D clusters is usually not possible because one of these conditions generally excludes the other. We demonstrate a new way to grow 2D clusters of transition metal dichalcogenides which are only weakly bound to the substrate, i.e. quasi free, but all show the same orientation thus allowing angle resolved photoemission experiments. In combination with scanning tunneling microscopy this provides for the first time the possibility to investigate the correlation between the size of quasi free 2D clusters and its associated electronic structure. For 2D HfS_2 clusters grown by van der Waals epitaxy we demonstrate that k_parallel-dispersion of electronic states already occurs for cluster diameters above ~100 nm.
△ Less
Submitted 29 September, 1999;
originally announced September 1999.
