Showing 1–50 of 136 results for author: Adachi, S

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

Authors: Nicholas Galitzki, Tran Tsan, Jake Spisak, Michael Randall, Max Silva-Feaver, Joseph Seibert, Jacob Lashner, Shunsuke Adachi, Sean M. Adkins, Thomas Alford, Kam Arnold, Peter C. Ashton, Jason E. Austermann, Carlo Baccigalupi, Andrew Bazarko, James A. Beall, Sanah Bhimani, Bryce Bixler, Gabriele Coppi, Lance Corbett, Kevin D. Crowley, Kevin T. Crowley, Samuel Day-Weiss, Simon Dicker, Peter N. Dow , et al. (55 additional authors not shown)

Abstract: The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT… ▽ More The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz. △ Less

Submitted 10 May, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

The Cost of Entanglement Renormalization on a Fault-Tolerant Quantum Computer

Authors: Joshua Job, Isaac H. Kim, Eric Johnston, Steve Adachi

Abstract: We perform a detailed resource estimate for the prospect of using deep entanglement renormalization ansatz (DMERA) on a fault-tolerant quantum computer, focusing on the regime in which the target system is large. For probing a relatively large system size ($64\times 64$), we observe up to an order of magnitude reduction in the number of qubits, compared to the approaches based on quantum phase est… ▽ More We perform a detailed resource estimate for the prospect of using deep entanglement renormalization ansatz (DMERA) on a fault-tolerant quantum computer, focusing on the regime in which the target system is large. For probing a relatively large system size ($64\times 64$), we observe up to an order of magnitude reduction in the number of qubits, compared to the approaches based on quantum phase estimation (QPE). We discuss two complementary strategies to measure the energy. The first approach is based on a random sampling of the local terms of the Hamiltonian, requiring $\mathcal{O}(1/ε^2)$ invocations of quantum circuits, each of which have depth of at most $\mathcal{O}(\log N)$, where $ε$ is the relative precision in the energy and $N$ is the system size. The second approach is based on a coherent estimation of the expectation value of observables averaged over space, which achieves the Heisenberg scaling while incurring only a logarithmic cost in the system size. For estimating the energy per site of $ε$, $\mathcal{O}\left(\frac{\log N}ε \right)$ $T$ gates and $\mathcal{O}\left(\log N \right)$ qubits suffice. The constant factor of the leading contribution is shown to be determined by the depth of the DMERA circuit, the gates used in the ansatz, and the periodicity of the circuit. We also derive tight bounds on the variance of the energy gradient, assuming the gates are random Pauli rotations. △ Less

Submitted 16 April, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: 21 pages. 12 figures, 2 appendices

Exploration of the polarization angle variability of the Crab Nebula with POLARBEAR and its application to the search for axion-like particles

Authors: Shunsuke Adachi, Tylor Adkins, Carlo Baccigalupi, Yuji Chinone, Kevin T. Crowley, Josquin Errard, Giulio Fabbian, Chang Feng, Takuro Fu**o, Masaya Hasegawa, Masashi Hazumi, Oliver Jeong, Daisuke Kaneko, Brian Keating, Akito Kusaka, Adrian T. Lee, Anto I. Lonappan, Yuto Minami, Masaaki Murata, Lucio Piccirillo, Christian L. Reichardt, Praween Siritanasak, Jake Spisak, Satoru Takakura, Grant P. Teply , et al. (1 additional authors not shown)

Abstract: The Crab Nebula, also known as Tau A, is a polarized astronomical source at millimeter wavelengths. It has been used as a stable light source for polarization angle calibration in millimeter-wave astronomy. However, it is known that its intensity and polarization vary as a function of time at a variety of wavelengths. Thus, it is of interest to verify the stability of the millimeter-wave polarizat… ▽ More The Crab Nebula, also known as Tau A, is a polarized astronomical source at millimeter wavelengths. It has been used as a stable light source for polarization angle calibration in millimeter-wave astronomy. However, it is known that its intensity and polarization vary as a function of time at a variety of wavelengths. Thus, it is of interest to verify the stability of the millimeter-wave polarization. If detected, polarization variability may be used to better understand the dynamics of Tau A, and for understanding the validity of Tau~A as a calibrator. One intriguing application of such observation is to use it for the search of axion-light particles (ALPs). Ultralight ALPs couple to photons through a Chern-Simons term, and induce a temporal oscillation in the polarization angle of linearly polarized sources. After assessing a number of systematic errors and testing for internal consistency, we evaluate the variability of the polarization angle of the Crab Nebula using 2015 and 2016 observations with the 150 GHz POLARBEAR instrument. We place a median 95% upper bound of polarization oscillation amplitude $A < 0.065^\circ$ over the oscillation frequencies from $0.75~\mathrm{year}^{-1}$ to $0.66~\mathrm{hour}^{-1}$. Assuming that no sources other than ALP are causing Tau A's polarization angle variation, that the ALP constitutes all the dark matter, and that the ALP field is a stochastic Gaussian field, this bound translates into a median 95% upper bound of ALP-photon coupling $g_{aγγ} < 2.16\times10^{-12}\,\mathrm{GeV}^{-1}\times(m_a/10^{-21} \mathrm{eV})$ in the mass range from $9.9\times10^{-23} \mathrm{eV}$ to $7.7\times10^{-19} \mathrm{eV}$. This demonstrates that this type of analysis using bright polarized sources is as competitive as those using the polarization of cosmic microwave background in constraining ALPs. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Comments: 24 pages, 19 figures, 5 tables. Submitted to PRD

FineBio: A Fine-Grained Video Dataset of Biological Experiments with Hierarchical Annotation

Authors: Takuma Yagi, Misaki Ohashi, Yifei Huang, Ryosuke Furuta, Shungo Adachi, Toutai Mitsuyama, Yoichi Sato

Abstract: In the development of science, accurate and reproducible documentation of the experimental process is crucial. Automatic recognition of the actions in experiments from videos would help experimenters by complementing the recording of experiments. Towards this goal, we propose FineBio, a new fine-grained video dataset of people performing biological experiments. The dataset consists of multi-view v… ▽ More In the development of science, accurate and reproducible documentation of the experimental process is crucial. Automatic recognition of the actions in experiments from videos would help experimenters by complementing the recording of experiments. Towards this goal, we propose FineBio, a new fine-grained video dataset of people performing biological experiments. The dataset consists of multi-view videos of 32 participants performing mock biological experiments with a total duration of 14.5 hours. One experiment forms a hierarchical structure, where a protocol consists of several steps, each further decomposed into a set of atomic operations. The uniqueness of biological experiments is that while they require strict adherence to steps described in each protocol, there is freedom in the order of atomic operations. We provide hierarchical annotation on protocols, steps, atomic operations, object locations, and their manipulation states, providing new challenges for structured activity understanding and hand-object interaction recognition. To find out challenges on activity understanding in biological experiments, we introduce baseline models and results on four different tasks, including (i) step segmentation, (ii) atomic operation detection (iii) object detection, and (iv) manipulated/affected object detection. Dataset and code are available from https://github.com/aistairc/FineBio. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Search for the 6$α$ condensed state in $^{24}$Mg using the $^{12}\rm{C}+{}^{12}\rm{C}$ scattering

Authors: Y. Fujikawa, T. Kawabata, S. Adachi, S. Enyo, T. Furuno, Y. Hijikata, K. Himi, K. Hirose, Y. Honda, K. Inaba, H. Makii, K. Miyamoto, M. Murata, K. Nishio, S. Okamoto, R. Orlandi, K. Sakanashi, F. Suzaki, S. Tsuji, K. Yahiro, J. Zenihiro

Abstract: We searched for the 6$α$-condensed state in $^{24}$Mg by measuring the $^{12}\rm{C}+{}^{12}\rm{C}$ scattering with the SAKRA Si detector array at $E_\rm{cm}$ = 17.5-25.0 MeV. By using the invariant-mass method for the detected 3$α$ particles, the inclusive cross sections for the $^{12}\rm{C}+{}^{12}\rm{C}\to{}^{12}\rm{C}(0^+_2)+X$ and $^{12}\rm{C}(3^-_1)+X$ reactions were determined. In addition,… ▽ More We searched for the 6$α$-condensed state in $^{24}$Mg by measuring the $^{12}\rm{C}+{}^{12}\rm{C}$ scattering with the SAKRA Si detector array at $E_\rm{cm}$ = 17.5-25.0 MeV. By using the invariant-mass method for the detected 3$α$ particles, the inclusive cross sections for the $^{12}\rm{C}+{}^{12}\rm{C}\to{}^{12}\rm{C}(0^+_2)+X$ and $^{12}\rm{C}(3^-_1)+X$ reactions were determined. In addition, the missing-mass spectroscopy was successfully utilized to determine the excitation energy of the residual $^{12}\rm{C}$ nucleus and the exclusive cross sections for the $^{12}\rm{C}+{}^{12}\rm{C}\to{}^{12}\rm{C}(0^+_2)+{}^{12}\rm{C}(0^+_1)$, $^{12}\rm{C}(0^+_2)+{}^{12}\rm{C}(2^+_1)$, and $^{12}\rm{C}(0^+_2)+{}^{12}\rm{C}(0^+_2)$ reactions. In both the inclusive $^{12}\rm{C}(0^+_2)+X$ channel and the exclusive $^{12}\rm{C}(0^+_2)+{}^{12}\rm{C}(0^+_1)$ channel, the cross section peaked at $E_rm{cm}$ = 19.4 MeV, which correspond to the excitation energy of $E_x$ = 33.3 MeV in $^{24}\rm{Mg}$. This 19.4-MeV state is a candidate for the 6$α$-condensed state because of the agreement of the excitation energy with the theoretical value and its decay property. In the exclusive $^{12}\rm{C}(0^+_2)+{}^{12}\rm{C}(0^+_2)$ channel, a broad state was observed at $E_\rm{cm}$ = 22.5 MeV, which correspond to the excitation energy of $E_x$ = 36.4 MeV in $^{24}\rm{Mg}$. From the angular distribution of the differential cross section, the spin and parity of this 22.5-MeV state was assigned to be $4^+$. In addition, a $2^+$ state was suggested at the low-energy side of the 22.5-MeV state. Because their excitation energies are higher than the theoretical value of the 6$α$-condensed state, these states might be excited states of the 6$α$-condensed state such as the $2^+_2$ and $4^+_1$ states in $^{12}\rm{C}$. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Comments: 8 pages, 6 figures

Journal ref: Physics Letters B 848 (2024) 138384

The Simons Observatory: A fully remote controlled calibration system with a sparse wire grid for cosmic microwave background telescopes

Authors: Masaaki Murata, Hironobu Nakata, Kengo Iijima, Shunsuke Adachi, Yudai Seino, Kenji Kiuchi, Frederick Matsuda, Michael J. Randall, Kam Arnold, Nicholas Galitzki, Bradley R. Johnson, Brian Keating, Akito Kusaka, John B. Lloyd, Joseph Seibert, Maximiliano Silva-Feaver, Osamu Tajima, Tomoki Terasaki, Kyohei Yamada

Abstract: For cosmic microwave background (CMB) polarization observations, calibration of detector polarization angles is essential. We have developed a fully remote controlled calibration system with a sparse wire grid that reflects linearly polarized light along the wire direction. The new feature is a remote-controlled system for regular calibration, which has not been possible in sparse wire grid calibr… ▽ More For cosmic microwave background (CMB) polarization observations, calibration of detector polarization angles is essential. We have developed a fully remote controlled calibration system with a sparse wire grid that reflects linearly polarized light along the wire direction. The new feature is a remote-controlled system for regular calibration, which has not been possible in sparse wire grid calibrators in past experiments. The remote control can be achieved by two electric linear actuators that load or unload the sparse wire grid into a position centered on the optical axis of a telescope between the calibration time and CMB observation. Furthermore, the sparse wire grid can be rotated by a motor. A rotary encoder and a gravity sensor are installed on the sparse wire grid to monitor the wire direction. They allow us to achieve detector angle calibration with expected systematic error of $0.08^{\circ}$. The calibration system will be installed in small-aperture telescopes at Simons Observatory. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Journal ref: Rev. Sci. Instrum. 94, 124502 (2023)

Search for Dark Photon Dark Matter in the Mass Range 41--74 $μ\mathrm{eV}$ using Millimeter-Wave Receiver and Radioshielding Box

Authors: S. Adachi, F. Fu**aka, S. Honda, Y. Muto, H. Nakata, Y. Sueno, T. Sumida, J. Suzuki, O. Tajima, H. Takeuchi

Abstract: Dark photons have been considered potential candidates for dark matter. The dark photon dark matter (DPDM) has a mass and interacts with electromagnetic fields via kinetic mixing with a coupling constant of $χ$. Thus, DPDMs are converted into ordinary photons at metal surfaces. Using a millimeter-wave receiver set in a radioshielding box, we performed experiments to detect the conversion photons f… ▽ More Dark photons have been considered potential candidates for dark matter. The dark photon dark matter (DPDM) has a mass and interacts with electromagnetic fields via kinetic mixing with a coupling constant of $χ$. Thus, DPDMs are converted into ordinary photons at metal surfaces. Using a millimeter-wave receiver set in a radioshielding box, we performed experiments to detect the conversion photons from the DPDM in the frequency range 10--18 GHz, which corresponds to a mass range 41--74 $μ\mathrm{eV}$. We found no conversion photon signal in this range and set the upper limits to $χ< (0.5\text{--}3.9) \times 10^{-10}$ at a 95% confidence level. △ Less

Submitted 16 November, 2023; v1 submitted 28 August, 2023; originally announced August 2023.

Comments: 8 pages, 14 figures

Photodisintegration Cross Section of $^4$He in the Giant Dipole Resonance Energy Region

Authors: M. Murata, T. Kawabata, S. Adachi, H. Akimune, S. Amano, Y. Fujikawa, T. Furuno, K. Inaba, Y. Ishii, S. Miyamoto, M. Tsumura, H. Utsunomiya

Abstract: We simultaneously measured the $^4$He($γ, n$)$^3$He and $^4$He($γ, p$)$^3$H reactions in the energy range around the giant dipole resonance. A quasi-monoenergetic photon beam produced via the laser Compton scattering technique was irradiated on the active-target time-projection chamber filled with helium gas, and trajectories of charged decay particles emitted from $^4$He were measured. Our data s… ▽ More We simultaneously measured the $^4$He($γ, n$)$^3$He and $^4$He($γ, p$)$^3$H reactions in the energy range around the giant dipole resonance. A quasi-monoenergetic photon beam produced via the laser Compton scattering technique was irradiated on the active-target time-projection chamber filled with helium gas, and trajectories of charged decay particles emitted from $^4$He were measured. Our data suggest that the $^4$He($γ, n$)$^3$He and $^4$He($γ, p$)$^3$H cross sections peak around 26 MeV. This result contradicts the previous experimental data reported by Shima et al. but is consistent with other experimental results. △ Less

Submitted 6 July, 2023; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: 12 pages, 6 figures

Journal ref: Phys. Rev. C 107, 064317(2023)

Constraints on axion-like polarization oscillations in the cosmic microwave background with POLARBEAR

Authors: The POLARBEAR Collaboration, Shunsuke Adachi, Tylor Adkins, Kam Arnold, Carlo Baccigalupi, Darcy Barron, Kolen Cheung, Yuji Chinone, Kevin T. Crowley, Josquin Errard, Giulio Fabbian, Chang Feng, Raphael Flauger, Takuro Fu**o, Daniel Green, Masaya Hasegawa, Masashi Hazumi, Daisuke Kaneko, Nobuhiko Katayama, Brian Keating, Akito Kusaka, Adrian T. Lee, Yuto Minami, Haruki Nishino, Christian L. Reichardt , et al. (7 additional authors not shown)

Abstract: Very light pseudoscalar fields, often referred to as axions, are compelling dark matter candidates and can potentially be detected through their coupling to the electromagnetic field. Recently a novel detection technique using the cosmic microwave background (CMB) was proposed, which relies on the fact that the axion field oscillates at a frequency equal to its mass in appropriate units, leading t… ▽ More Very light pseudoscalar fields, often referred to as axions, are compelling dark matter candidates and can potentially be detected through their coupling to the electromagnetic field. Recently a novel detection technique using the cosmic microwave background (CMB) was proposed, which relies on the fact that the axion field oscillates at a frequency equal to its mass in appropriate units, leading to a time-dependent birefringence. For appropriate oscillation periods this allows the axion field at the telescope to be detected via the induced sinusoidal oscillation of the CMB linear polarization. We search for this effect in two years of POLARBEAR data. We do not detect a signal, and place a median $95 \%$ upper limit of $0.65 ^\circ$ on the sinusoid amplitude for oscillation frequencies between $0.02\,\text{days}^{-1}$ and $0.45\,\text{days}^{-1}$, which corresponds to axion masses between $9.6 \times 10^{-22} \, \text{eV}$ and $2.2\times 10^{-20} \,\text{eV}$. Under the assumptions that 1) the axion constitutes all the dark matter and 2) the axion field amplitude is a Rayleigh-distributed stochastic variable, this translates to a limit on the axion-photon coupling $g_{φγ} < 2.4 \times 10^{-11} \,\text{GeV}^{-1} \times ({m_φ}/{10^{-21} \, \text{eV}})$. △ Less

Submitted 1 September, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 17 pages, 5 figures, 2 tables. Published in Physical Review D

Journal ref: Phys. Rev. D 108, 043017 (2023)

PANDORA project: photo-nuclear reactions below $A=60$

Authors: A. Tamii, L. Pellegri, P. -A. Söderström, D. Allard, S. Goriely, T. Inakura, E. Khan, E. Kido, M. Kimura, E. Litvinova, S. Nagataki, P. von Neumann-Cosel, N. Pietralla, N. Shimizu, N. Tsoneva, Y. Utsuno, S. Adachi, P. Adsley, A. Bahini, D. Balabanski, B. Baret, J. A. C. Bekker, S. D. Binda, E. Boicu, A. Bracco , et al. (56 additional authors not shown)

Abstract: Photo-nuclear reactions of light nuclei below a mass of $A=60$ are studied experimentally and theoretically by the PANDORA (Photo-Absorption of Nuclei and Decay Observation for Reactions in Astrophysics) project. Two experimental methods, virtual-photon excitation by proton scattering and real-photo absorption by a high-brilliance gamma-ray beam produced by laser Compton scattering, will be applie… ▽ More Photo-nuclear reactions of light nuclei below a mass of $A=60$ are studied experimentally and theoretically by the PANDORA (Photo-Absorption of Nuclei and Decay Observation for Reactions in Astrophysics) project. Two experimental methods, virtual-photon excitation by proton scattering and real-photo absorption by a high-brilliance gamma-ray beam produced by laser Compton scattering, will be applied to measure the photo-absorption cross sections and the decay branching ratio of each decay channel as a function of the photon energy. Several nuclear models, e.g. anti-symmetrized molecular dynamics, mean-field type models, a large-scale shell model, and ab initio models, will be employed to predict the photo-nuclear reactions. The uncertainty in the model predictions will be evaluated from the discrepancies between the model predictions and the experimental data. The data and the predictions will be implemented in a general reaction calculation code TALYS . The results will be applied to the simulation of the photo-disintegration process of ultra-high-energy cosmic rays in inter-galactic propagation. △ Less

Submitted 18 November, 2022; v1 submitted 7 November, 2022; originally announced November 2022.

Unitary monodromies of rank two Fuchsian systems with $(n+1)$ singularities

Authors: Shunya Adachi

Abstract: We study the unitarity of monodromies of rank two Fuchsian systems of SL type with $(n+1)$ regular singularities on the Riemann sphere, namely, we give a sufficient and necessary condition for the monodromy group to be conjugate to a subgroup of a special unitary group $\mathrm{SU}(p,q)$. When $n\ge 3$, the moduli space of irreducible monodromies can be realized as an affine algebraic set in… ▽ More We study the unitarity of monodromies of rank two Fuchsian systems of SL type with $(n+1)$ regular singularities on the Riemann sphere, namely, we give a sufficient and necessary condition for the monodromy group to be conjugate to a subgroup of a special unitary group $\mathrm{SU}(p,q)$. When $n\ge 3$, the moduli space of irreducible monodromies can be realized as an affine algebraic set in $\mathbb{C}^m$ for some $m \in \mathbb{N}$. In this paper, we give a characterization and construction of unitary monodromies in terms of this affine algebraic set. The signatures of unitary monodromies are also classified. △ Less

Submitted 2 October, 2023; v1 submitted 26 October, 2022; originally announced October 2022.

Comments: 22 pages, 1 figure

MSC Class: 34M35; 34M15

Riemannian Levenberg-Marquardt Method with Global and Local Convergence Properties

Authors: Sho Adachi, Takayuki Okuno, Akiko Takeda

Abstract: We extend the Levenberg-Marquardt method on Euclidean spaces to Riemannian manifolds. Although a Riemannian Levenberg-Marquardt (RLM) method was produced by Peeters in 1993, to the best of our knowledge, there has been no analysis of theoretical guarantees for global and local convergence properties. As with the Euclidean LM method, how to update a specific parameter known as the dam** parameter… ▽ More We extend the Levenberg-Marquardt method on Euclidean spaces to Riemannian manifolds. Although a Riemannian Levenberg-Marquardt (RLM) method was produced by Peeters in 1993, to the best of our knowledge, there has been no analysis of theoretical guarantees for global and local convergence properties. As with the Euclidean LM method, how to update a specific parameter known as the dam** parameter has significant effects on its performances. We propose a trust-region-like approach for determining the parameter. We evaluate the worst-case iteration complexity to reach an epsilon-stationary point, and also prove that it has desirable local convergence properties under the local error-bound condition. Finally, we demonstrate the efficiency of our proposed algorithm by numerical experiments. △ Less

Submitted 17 July, 2023; v1 submitted 1 October, 2022; originally announced October 2022.

Metastable structure of photoexcited WO$_{3}$ determined by the pump--probe extended X-ray absorption fine structure spectroscopy and constrained thorough search analysis

Authors: Daiki Kido, Hiromitsu Uehara, Satoru Takakusagi, Jun-ya Hasegawa, Kiyotaka Asakura, Yohei Uemura, Yuki Wakisaka, Akihiro Koide, Toshihiko Yokoyama, Yasuhiro Niwa, Shunsuke Nozawa, Kohei Ichiyanagi, Ryo Fukaya, Shin-ichi Adachi, Harry Jenkins, Tokushi Sato

Abstract: We have determined the local structure of photoexcited metastable WO$_3$ created 150 ps after 400 nm laser irradiation by the pulse pump--probe L$_3$-edge extended X-ray absorption fine structure spectroscopy and the constrained thorough search analysis. We have found a highly distorted octahedral local structure with one of the shortest W=O bonds being further shortened to 1.66 Åwhile the other f… ▽ More We have determined the local structure of photoexcited metastable WO$_3$ created 150 ps after 400 nm laser irradiation by the pulse pump--probe L$_3$-edge extended X-ray absorption fine structure spectroscopy and the constrained thorough search analysis. We have found a highly distorted octahedral local structure with one of the shortest W=O bonds being further shortened to 1.66 Åwhile the other five bonds were elongated even though theoretical calculations predicted the reverse change. We discuss this contradiction and propose a possible structure for the metastable state. △ Less

Submitted 17 June, 2022; v1 submitted 14 May, 2022; originally announced May 2022.

Comments: 9 pages, 3 figures with SI

Search for Dark Photon Dark Matter in the Mass Range $74\mbox{--}110\,μ\mathrm{eV}/c^2$ with a Cryogenic Millimeter-Wave Receiver

Authors: Shumpei Kotaka, Shunsuke Adachi, Ryo Fu**aka, Shunsuke Honda, Hironobu Nakata, Yudai Seino, Yoshinori Sueno, Toshi Sumida, Junya Suzuki, Osamu Tajima, Soichiro Takeichi

Abstract: We search for the dark photon dark matter (DPDM) using a cryogenic millimeter-wave receiver. DPDM has a kinetic coupling with electromagnetic fields with a coupling constant of $χ$, and is converted into ordinary photons at the surface of a metal plate. We search for signal of this conversion in the frequency range $18\text{--}26.5\,\mathrm{GHz}$, which corresponds to the mass range… ▽ More We search for the dark photon dark matter (DPDM) using a cryogenic millimeter-wave receiver. DPDM has a kinetic coupling with electromagnetic fields with a coupling constant of $χ$, and is converted into ordinary photons at the surface of a metal plate. We search for signal of this conversion in the frequency range $18\text{--}26.5\,\mathrm{GHz}$, which corresponds to the mass range $74\text{--}110\,mu\mathrm{eV}/c^2$. We observed no significant signal excess, allowing us to set an upper bound of $χ< (0.3\text{--}2.0)\times 10^{-10}$ at 95\% confidence level. This is the most stringent constraint to date, and tighter than cosmological constraints. Improvements from previous studies are obtained by employing a cryogenic optical path and a fast spectrometer. △ Less

Submitted 19 February, 2023; v1 submitted 7 May, 2022; originally announced May 2022.

Comments: 5 pages, 5 figures

Improved upper limit on degree-scale CMB B-mode polarization power from the 670 square-degree POLARBEAR survey

Authors: The POLARBEAR Collaboration, S. Adachi, T. Adkins, M. A. O. Aguilar Faúndez, K. S. Arnold, C. Baccigalupi, D. Barron, S. Chapman, K. Cheung, Y. Chinone, K. T. Crowley, T. Elleflot, J. Errard, G. Fabbian, C. Feng, T. Fu**o, N. Galitzki, N. W. Halverson, M. Hasegawa, M. Hazumi, H. Hirose, L. Howe, J. Ito, O. Jeong, D. Kaneko , et al. (29 additional authors not shown)

Abstract: We report an improved measurement of the degree-scale cosmic microwave background $B$-mode angular-power spectrum over 670 square-degree sky area at 150 GHz with POLARBEAR. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data… ▽ More We report an improved measurement of the degree-scale cosmic microwave background $B$-mode angular-power spectrum over 670 square-degree sky area at 150 GHz with POLARBEAR. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data volume is increased by a factor of 1.8. We report a new analysis using the larger data set. We find the measured $B$-mode spectrum is consistent with the $Λ$CDM model with Galactic dust foregrounds. We estimate the contamination of the foreground by cross-correlating our data and Planck 143, 217, and 353 GHz measurements, where its spectrum is modeled as a power law in angular scale and a modified blackbody in frequency. We place an upper limit on the tensor-to-scalar ratio $r$ < 0.33 at 95% confidence level after marginalizing over the foreground parameters. △ Less

Submitted 15 June, 2022; v1 submitted 4 March, 2022; originally announced March 2022.

Comments: 16 pages, 9 figures, 8 tables, Published in ApJ

Journal ref: The POLARBEAR Collaboration 2022 ApJ 931 101

High-pressure synthesis of superconducting Sn$_{3}$S$_{4}$ using diamond anvil cell with boron-doped diamond heater

Authors: Ryo Matsumoto, Kensei Terashima, Satoshi Nakano, Kazuki Nakamura, Sayaka Yamamoto, Takafumi D. Yamamoto, Takahiro Ishikawa, Shintaro Adachi, Tetsuo Irifune, Motoharu Imai, Yoshihiko Takano

Abstract: High-pressure techniques open exploration of functional materials in broad research fields. An established diamond anvil cell with a boron-doped diamond heater and transport measurement terminals has performed the high-pressure synthesis of a cubic Sn$_{3}$S$_{4}$ superconductor. X-ray diffraction and Raman spectroscopy reveal that the Sn$_{3}$S$_{4}$ phase is stable in the pressure range of P>5 G… ▽ More High-pressure techniques open exploration of functional materials in broad research fields. An established diamond anvil cell with a boron-doped diamond heater and transport measurement terminals has performed the high-pressure synthesis of a cubic Sn$_{3}$S$_{4}$ superconductor. X-ray diffraction and Raman spectroscopy reveal that the Sn$_{3}$S$_{4}$ phase is stable in the pressure range of P>5 GPa in a decompression process. Transport measurement terminals in the diamond anvil cell detect a metallic nature and superconductivity in the synthesized Sn$_{3}$S$_{4}$ with a maximum onset transition temperature of 13.3 K at 5.6 GPa. The observed pressure-T$_{c}$ relationship is consistent with that from the first-principles calculation. The observation of superconductivity in Sn$_{3}$S$_{4}$ opens further materials exploration under high temperature and pressure conditions. △ Less

Submitted 14 February, 2022; originally announced February 2022.

Existence and asymptotic behavior of positive solutions for a class of locally superlinear Schrödinger equation

Authors: Shinji Adachi, Norihisa Ikoma, Tatsuya Watanabe

Abstract: This paper treats the existence of positive solutions of $-Δu + V(x) u = λf(u)$ in $\mathbb{R}^N$. Here $N \geq 1$, $λ> 0$ is a parameter and $f(u)$ satisfies conditions only in a neighborhood of $u=0$. We shall show the existence of positive solutions with potential of trap** type or $\mathcal{G}$-symmetric potential where $\mathcal{G} \subset O(N)$. Our results extend previous results as well… ▽ More This paper treats the existence of positive solutions of $-Δu + V(x) u = λf(u)$ in $\mathbb{R}^N$. Here $N \geq 1$, $λ> 0$ is a parameter and $f(u)$ satisfies conditions only in a neighborhood of $u=0$. We shall show the existence of positive solutions with potential of trap** type or $\mathcal{G}$-symmetric potential where $\mathcal{G} \subset O(N)$. Our results extend previous results as well as we also study the asymptotic behavior of a family $(u_λ)_{λ\geq λ_0}$ of positive solutions as $λ\to \infty$. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Comments: 29 pages

MSC Class: 35J20; 35B40; 35J61; 58E40

Journal ref: Manuscripta Mathematica 172 (2023), 933-970

Diamond anvil cell with boron-doped diamond heater for high-pressure synthesis and in-situ transport measurements

Authors: Ryo Matsumoto, Sayaka Yamamoto, Shintaro Adachi, Takeshi Sakai, Tetsuo Irifune, Yoshihiko Takano

Abstract: Temperature and pressure are essential parameters in the synthesis, evaluation, and application of functional materials. This study proposes the addition of a heating function to a high-pressure diamond anvil cell (DAC) with in-situ measurement probes. The proposed DAC allows for simultaneous control of temperature and pressure within the sample space and can be used to synthesize functional mater… ▽ More Temperature and pressure are essential parameters in the synthesis, evaluation, and application of functional materials. This study proposes the addition of a heating function to a high-pressure diamond anvil cell (DAC) with in-situ measurement probes. The proposed DAC allows for simultaneous control of temperature and pressure within the sample space and can be used to synthesize functional materials under extreme conditions. The various components, namely the heater, thermometer, and measurement probes, were fabricated with a boron-doped diamond epitaxial film and could be used repeatedly. The developed DAC was used to successfully conduct the high-pressure annealing of La(O,F)BiS$_{2}$ single crystal and the high-pressure synthesis of EuFBiS$_{2}$ superconductors. The proposed technique shows promise for further exploration of superconductors to broaden the research field. △ Less

Submitted 16 June, 2021; originally announced June 2021.

Material survey for millimeter-wave absorber using 3-D printed mold

Authors: T. Otsuka, S. Adachi, M. Hattori, Y. Sakurai, O. Tajima

Abstract: Radio absorptive materials (RAMs) are key elements for receivers in the millimeter-wave range. For astronomical applications, cryogenic receivers are widely used to achieve a high-sensitivity. These cryogenic receivers, in particular the receivers for the cosmic microwave background, require that the RAM has low surface reflectance ($\lesssim 1\%$) in a wide frequency range (20--300 GHz) to minimi… ▽ More Radio absorptive materials (RAMs) are key elements for receivers in the millimeter-wave range. For astronomical applications, cryogenic receivers are widely used to achieve a high-sensitivity. These cryogenic receivers, in particular the receivers for the cosmic microwave background, require that the RAM has low surface reflectance ($\lesssim 1\%$) in a wide frequency range (20--300 GHz) to minimize the undesired stray light to detectors. We develop a RAM that satisfies this requirement based on a production technology using a 3D-printed mold (named as RAM-3pm). This method allows us to shape periodic surface structures to achieve a low reflectance. A wide range of choices for the absorptive materials is an advantage. We survey the best material for the RAM-3pm. We measure the index of refraction ($n$) and the extinction coefficient ($κ$) at liquid nitrogen temperature as well as at room temperature of 17 materials. We also measure the reflectance at the room temperature for the selected materials. The mixture of an epoxy adhesive (STYCAST-2850FT) and a carbon fiber (K223HE) achieves the best performance. We estimate the optical performance at the liquid nitrogen temperature by a simulation based on the measured $n$ and $κ$. The RAM-3pm made with this material satisfies the requirement except at the lower edge of the frequency range ($\sim$20 GHz). We also estimate the reflectance of a larger pyramidal structure on the surface. We find a design to satisfy our requirement. △ Less

Submitted 29 May, 2021; originally announced May 2021.

Comments: 8 pages, 10 figures

Pressure-induced superconductivity in TiGeTe$_{6}$

Authors: Sayaka Yamamoto, Ryo Matsumoto, Shintaro Adachi, Kensei Terashima, Hiromi Tanaka, Tetsuo Irifune, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Layered ternary transition-metal chalcogenides have been focused as a vein of exploration for superconductors. In this study, TiGeTe$_{6}$ single crystals were synthesized and characterized by structural and valence state analyses and electrical transport measurements. The transport properties were measured under various pressures up to 71 GPa. The activation energy gets smaller as the applied pre… ▽ More Layered ternary transition-metal chalcogenides have been focused as a vein of exploration for superconductors. In this study, TiGeTe$_{6}$ single crystals were synthesized and characterized by structural and valence state analyses and electrical transport measurements. The transport properties were measured under various pressures up to 71 GPa. The activation energy gets smaller as the applied pressure increases, and a signature of a pressure-induced metallization was observed under around 8.4 GPa. Under 13 GPa, pressure-induced superconductivity was discovered in this compound for the first time, with successive drops at 3 K and 6 K in the resistance, indicating the presence of multiple superconducting transitions. The superconducting transition temperature kept increasing as we further applied the pressure to the TiGeTe$_{6}$ single crystal in the performed pressure range, reaching as high as 8.1 K under 71 GPa. △ Less

Submitted 11 May, 2021; originally announced May 2021.

The Simons Observatory: the Large Aperture Telescope (LAT)

Authors: Zhilei Xu, Shunsuke Adachi, Peter Ade, J. A. Beall, Tanay Bhandarkar, J. Richard Bond, Grace E. Chesmore, Yuji Chinone, Steve K. Choi, Jake A. Connors, Gabriele Coppi, Nicholas F. Cothard, Kevin D. Crowley, Mark Devlin, Simon Dicker, Bradley Dober, Shannon M. Duff, Nicholas Galitzki, Patricio A. Gallardo, Joseph E. Golec, Jon E. Gudmundsson, Saianeesh K. Haridas, Kathleen Harrington, Carlos Hervias-Caimapo, Shuay-Pwu Patty Ho , et al. (35 additional authors not shown)

Abstract: The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its… ▽ More The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline. △ Less

Submitted 29 April, 2021; v1 submitted 19 April, 2021; originally announced April 2021.

Comments: 4 pages, 1 figure

Journal ref: Research Notes AAS, 5, 100 (2021)

High pressure effects on La(O,F)BiS$_{\mathrm{2}}$ single crystal using diamond anvil cell with dual-probe diamond electrodes

Authors: Sayaka Yamamoto, Ryo Matsumoto, Shintaro Adachi, Yoshihiko Takano

Abstract: The high-pressure phase of La(O,F)BiS$_{\mathrm{2}}$ exhibits the highest transition temperature among all the BiS$_{\mathrm{2}}$-based superconductors. Various studies, such as investigation of isotope effects, have been conducted to explain its superconducting mechanism. However, there are very few reports on the electrical transport properties and vibration modes of single crystalline La(O,F)Bi… ▽ More The high-pressure phase of La(O,F)BiS$_{\mathrm{2}}$ exhibits the highest transition temperature among all the BiS$_{\mathrm{2}}$-based superconductors. Various studies, such as investigation of isotope effects, have been conducted to explain its superconducting mechanism. However, there are very few reports on the electrical transport properties and vibration modes of single crystalline La(O,F)BiS$_{\mathrm{2}}$ under high pressure. In this study, we developed a diamond anvil cell with dual-probe diamond electrodes to measure the electrical transport properties of La(O,F)BiS$_{\mathrm{2}}$ single crystal and Pb as a manometer at low temperature. Using the developed system, a linear decrease in the transition temperature and phonon hardening was observed under the application of pressure on La(O,F)BiS$_{\mathrm{2}}$ single crystal. △ Less

Submitted 8 March, 2021; originally announced March 2021.

Journal ref: Appl. Phys. Express 14, 043001 (2021)

The Simons Observatory Large Aperture Telescope Receiver

Authors: Ningfeng Zhu, Tanay Bhandarkar, Gabriele Coppi, Anna M. Kofman, John L. Orlowski-Scherer, Zhilei Xu, Shunsuke Adachi, Peter Ade, Simone Aiola, Jason Austermann, Andrew O. Bazarko, James A. Beall, Sanah Bhimani, J. Richard Bond, Grace E. Chesmore, Steve K. Choi, Jake Connors, Nicholas F. Cothard, Mark Devlin, Simon Dicker, Bradley Dober, Cody J. Duell, Shannon M. Duff, Rolando Dünner, Giulio Fabbian , et al. (46 additional authors not shown)

Abstract: The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m an… ▽ More The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be coupled to the Large Aperture Telescope located at an elevation of 5,200 m on Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution millimeter-wave maps of half the sky with unprecedented precision. The LATR is the largest cryogenic millimeter-wave camera built to date with a diameter of 2.4 m and a length of 2.6 m. It cools 1200 kg of material to 4 K and 200 kg to 100 mk, the operating temperature of the bolometric detectors with bands centered around 27, 39, 93, 145, 225, and 280 GHz. Ultimately, the LATR will accommodate 13 40 cm diameter optics tubes, each with three detector wafers and a total of 62,000 detectors. The LATR design must simultaneously maintain the optical alignment of the system, control stray light, provide cryogenic isolation, limit thermal gradients, and minimize the time to cool the system from room temperature to 100 mK. The interplay between these competing factors poses unique challenges. We discuss the trade studies involved with the design, the final optimization, the construction, and ultimate performance of the system. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Simons Observatory Small Aperture Telescope overview

Authors: Kenji Kiuchi, Shunsuke Adachi, Aamir M. Ali, Kam Arnold, Peter Ashton, Jason E. Austermann, Andrew Bazako, James A. Beall, Yuji Chinone, Gabriele Coppi, Kevin D. Crowley, Kevin T. Crowley, Simon Dicker, Bradley Dober, Shannon M. Duff, Giulio Fabbian, Nicholas Galitzki, Joseph E. Golec, Jon E. Gudmundsson, Kathleen Harrington, Masaya Hasegawa, Makoto Hattori, Charles A. Hill, Shuay-Pwu Patty Ho, Johannes Hubmayr , et al. (29 additional authors not shown)

Abstract: The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain… ▽ More The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment from the Atacama Desert in Chile comprising three small-aperture telescopes (SATs) and one large-aperture telescope (LAT). In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities. In this work, we focus on the SATs which are optimized to search for primordial gravitational waves that are detected as parity-odd polarization patterns called a B-modes on degree scales in the CMB. Each SAT employs a single optics tube with TES arrays operating at 100 mK. The high throughput optics system has a 42 cm aperture and a 35-degree field of view coupled to a 36 cm diameter focal plane. The optics consist of three metamaterial anti-re ection coated silicon lenses. Cryogenic ring baffles with engineered blackbody absorbers are installed in the optics tube to minimize the stray light. The entire optics tube is cooled to 1 K. A cryogenic continuously rotating half-wave plate near the sky side of the aperture stop helps to minimize the effect of atmospheric uctuations. The telescope warm baffling consists of a forebaffle, an elevation stage mounted co-moving shield, and a fixed ground shield that together control the far side-lobes and mitigates ground-synchronous systematics. We present the status of the SAT development. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 8 pages, 6 figures

Journal ref: Proc. SPIE 11445, Ground-based and Airborne Telescopes VIII, 114457L (18 December 2020)

THz emission from a Bi2Sr2CaCu2O8+δ cross-whisker junction

Authors: Yoshito Saito, Shintaro Adachi, Ryo Matsumoto, Masanori Nagao, Shuma Fujita, Ken Hayama, Kensei Terashima, Hiroyuki Takeya, Itsuhiro Kakeya, Yoshihiko Takano

Abstract: Cuprate superconductor Bi2Sr2CaCu2O8+δ (BSCCO) has been a promising candidate of a coherent, continuous, and compact THz light source owing to its intrinsic Josephson junction inside the crystal structure. In this paper, we utilized BSCCO cross-whisker junctions to produce THz emitter device using the whisker crystals which can be easily obtained compared with single crystals. As a result, we have… ▽ More Cuprate superconductor Bi2Sr2CaCu2O8+δ (BSCCO) has been a promising candidate of a coherent, continuous, and compact THz light source owing to its intrinsic Josephson junction inside the crystal structure. In this paper, we utilized BSCCO cross-whisker junctions to produce THz emitter device using the whisker crystals which can be easily obtained compared with single crystals. As a result, we have successfully observed the emission from the cross-whisker intrinsic Josephson junction, with frequency of ~0.7 THz. Our findings might enlarge the applicability of BSCCO superconductors for the THz emission source. △ Less

Submitted 7 December, 2020; v1 submitted 2 December, 2020; originally announced December 2020.

Journal ref: Applied Physics Express 14, 033003 (2021)

Enhancement of giant refrigerant capacity in Ho$_{1-x}$Gd$_{x}$B$_{2}$ alloys (0.1 $\leq$ x $\leq$ 0.4)

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D Yamamoto, Suguru Iwasaki, Akiko T. Saito, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Mohammed ElMassalami, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperatu… ▽ More Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperature, a reduction in peak value of the magnetic entropy change while still being relatively high, and a broadening of the magnetic entropy change curves. The overall influence is a relatively high refrigerant capacity and relative cooling power, and an extension of the thermal working range to higher temperatures; thus, electing Ho$_{1-x}$Gd$_{x}$B$_{2}$(as potential candidates for cryogenic refrigeration applications. △ Less

Submitted 25 November, 2020; originally announced November 2020.

Comments: 12 pages, 4 figures and 1 table

The Simons Observatory: Metamaterial Microwave Absorber (MMA) and its Cryogenic Applications

Authors: Zhilei Xu, Grace E. Chesmore, Shunsuke Adachi, Aamir M. Ali, Andrew Bazarko, Gabriele Coppi, Mark Devlin, Tom Devlin, Simon R. Dicker, Patricio A. Gallardo, Joseph E. Golec, Jon E. Gudmundsson, Kathleen Harrington, Makoto Hattori, Anna Kofman, Kenji Kiuchi, Akito Kusaka, Michele Limon, Frederick Matsuda, Jeff McMahon, Federico Nati, Michael D. Niemack, Shreya Sutariya, Aritoki Suzuki, Grant P. Teply , et al. (4 additional authors not shown)

Abstract: Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as… ▽ More Controlling stray light at millimeter wavelengths requires special optical design and selection of absorptive materials that should be compatible with cryogenic operating environments. While a wide selection of absorptive materials exists, these typically exhibit high indices of refraction and reflect/scatter a significant fraction of light before absorption. For many lower index materials such as commercial microwave absorbers, their applications in cryogenic environments are challenging. In this paper, we present a new tool to control stray light: metamaterial microwave absorber tiles. These tiles comprise an outer metamaterial layer that approximates a lossy gradient index anti-reflection coating. They are fabricated via injection molding commercially available carbon-loaded polyurethane (25\% by mass). The injection molding technology enables mass production at low cost. The design of these tiles is presented, along with thermal tests to 1 K. Room temperature optical measurements verify their control of reflectance to less than 1\% up to 65$\circ$ angles of incidence, and control of wide angle scattering below 0.01\%. The dielectric properties of the bulk carbon-loaded material used in the tiles is also measured at different temperatures, confirming that the material maintains similar dielectric properties down to 3 K. △ Less

Submitted 22 February, 2021; v1 submitted 5 October, 2020; originally announced October 2020.

Comments: 10 pages, 11 figures, published in Applied Optics, selected as "Editor's pick"

Journal ref: Applied Optics, Vol. 60, Issue 4, pp. 864-874 (2021)

Systematic comparison of deep belief network training using quantum annealing vs. classical techniques

Authors: Joshua Job, Steve Adachi

Abstract: In this work we revisit and expand on a 2015 study that used a D-Wave quantum annealer as a sampling engine to assist in the training of a Deep Neural Network. The original 2015 results were reproduced using more recent D-Wave hardware. We systematically compare this quantum-assisted training method to a wider range of classical techniques, including: Contrastive Divergence with a different choice… ▽ More In this work we revisit and expand on a 2015 study that used a D-Wave quantum annealer as a sampling engine to assist in the training of a Deep Neural Network. The original 2015 results were reproduced using more recent D-Wave hardware. We systematically compare this quantum-assisted training method to a wider range of classical techniques, including: Contrastive Divergence with a different choice of optimizer; Contrastive Divergence with an increased number of steps (CD-k); and Simulated Annealing (SA). We find that quantum-assisted training still outperforms the CD with Gibbs sampling-based techniques; however, SA is able to match the performance of quantum-assisted training trivially using a quench-like schedule with a single sweep at high temperature followed by one at the target temperature. △ Less

Submitted 31 August, 2020; originally announced September 2020.

Comments: 11 pages, 11 figures

Report number: SSS2020004034

Observation of small Fermi pockets protected by clean CuO2 sheets of a high-Tc superconductor

Authors: So Kunisada, Shunsuke Isono, Yoshimitsu Kohama, Shiro Sakai, Cedric Bareille, Shunsuke Sakuragi, Ryo Noguchi, Kifu Kurokawa, Kenta Kuroda, Yukiaki Ishida, Shintaro Adachi, Ryotaro Sekine, Timur K. Kim, Cephise Cacho, Shik Shin, Takami Tohyama, Kazuyasu Tokiwa, Takeshi Kondo

Abstract: The superconductivity of high transition temperature (Tc) occurs in copper oxides with carrier-do** to an antiferromagnetic (AF) Mott insulator. This discovery more than thirty years ago immediately led to a prediction about the formation of a small Fermi pocket. This structure, however, has not yet been detected, while it could be a key element in relating high-Tc superconductivity to Mott phys… ▽ More The superconductivity of high transition temperature (Tc) occurs in copper oxides with carrier-do** to an antiferromagnetic (AF) Mott insulator. This discovery more than thirty years ago immediately led to a prediction about the formation of a small Fermi pocket. This structure, however, has not yet been detected, while it could be a key element in relating high-Tc superconductivity to Mott physics. To address this long-standing issue, we investigate the electronic structure of a five-layered Ba2Ca4Cu5O10(F,O)2 with inner CuO2 planes demonstrated to be cleanest ever in cuprates. Most surprisingly, we find small Fermi surface (FS) pockets closed around (pi/2,pi/2) consistently by angle-resolved photoemission spectroscopy (ARPES) and quantum oscillation measurements. The d-wave superconducting gap opens along the pocket, revealing the coexistence between the superconductivity and AF order in the same CuO2 sheet. Our data further indicate that the superconductivity can occur without contribution from the states near the antinodal region, which are shared by other competing excitations such as the charge density wave (CDW) and pseudogap states. This will have significant implications for understanding the superconductivity and puzzling Fermi arc phenomena in cuprates. △ Less

Submitted 18 August, 2020; originally announced August 2020.

Journal ref: Science 369, 833 (2020)

On a Connection Problem for the Generalized Hypergeometric Equation

Authors: Shunya Adachi

Abstract: We study a connection problem between the fundamental systems of solutions at singular points $0$ and $1$ for the generalized hypergeometric equation which is satisfied by the generalized hypergeometric series ${}_nF_{n-1}$. In general, the local solution space around $x=1$ consists of one dimensional singular solution space and $n-1$ dimensional holomorphic solution space. Therefore in the case o… ▽ More We study a connection problem between the fundamental systems of solutions at singular points $0$ and $1$ for the generalized hypergeometric equation which is satisfied by the generalized hypergeometric series ${}_nF_{n-1}$. In general, the local solution space around $x=1$ consists of one dimensional singular solution space and $n-1$ dimensional holomorphic solution space. Therefore in the case of $n\ge3$, the expression of connection matrix depends on the choice of the fundamental system of solutions at $x=1$. On the connection problem for ordinary differential equations, Schäfke and Schmidt (LNM 810, Springer, 1980) gave an impressive idea which focuses on the series expansion of fundamental system of solutions. We apply their idea to solve the connection problem for the generalized hypergeometric equation and derive the connection matrix. △ Less

Submitted 24 August, 2020; v1 submitted 9 August, 2020; originally announced August 2020.

Comments: 16 pages

MSC Class: 34M40; 33C20; 41A58

Candidates for the 5$α$ condensed state in ${}^{20}$Ne

Authors: S. Adachi, Y. Fujikawa, T. Kawabata, H. Akimune, T. Doi, T. Furuno, T. Harada, K. Inaba, S. Ishida, M. Itoh, C. Iwamoto, N. Kobayashi, Y. Maeda, Y. Matsuda, M. Murata, S. Okamoto, A. Sakaue, R. Sekiya, A. Tamii, M. Tsumura

Abstract: We conducted the coincidence measurement of $α$ particles inelastically scattered from ${}^{20}$Ne at $0^{\circ}$ and decay charged particles in order to search for the alpha-particle condensed state. We compared the measured excitation-energy spectrum and decay branching ratio with the statistical-decay-model calculations, and found that the newly observed states at $E_x$ = 23.6, 21.8, and 21.2 M… ▽ More We conducted the coincidence measurement of $α$ particles inelastically scattered from ${}^{20}$Ne at $0^{\circ}$ and decay charged particles in order to search for the alpha-particle condensed state. We compared the measured excitation-energy spectrum and decay branching ratio with the statistical-decay-model calculations, and found that the newly observed states at $E_x$ = 23.6, 21.8, and 21.2 MeV in ${}^{20}$Ne are strongly coupled to a candidate for the 4$α$ condensed state in ${}^{16}$O. This result presents the first strong evidence that these states are the candidates for the 5$α$ condensed state. △ Less

Submitted 7 May, 2021; v1 submitted 4 August, 2020; originally announced August 2020.

Comments: 6 pages, 5 figures. The part of the analysis is updated, and some discussions are added

Electric and magnetic dipole strength in 112,114,116,118,120,124Sn

Authors: S. Bassauer, P. von Neumann-Cosel, P. -G. Reinhard, A. Tamii, S. Adachi, C. A. Bertulani, P. Y. Chan, A. D'Alessio, H. Fujioka, H. Fujita, Y. Fujita, G. Gey, M. Hilcker, T. H. Hoang, A. Inoue, J. Isaak, C. Iwamoto, T. Klaus, N. Kobayashi, Y. Maeda, M. Matsuda, N. Nakatsuka, S. Noji, H. J. Ong, I. Ou , et al. (11 additional authors not shown)

Abstract: Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295 MeV beam covering laboratory angles 0°-6° and excitation energies 6-22 MeV. Cross sections due to E1 and M1 excitations were extracted with a multipole decomposition analysis and then converted to reduced transition probabilities with the "virtual photon method" for E1 and the "unit… ▽ More Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295 MeV beam covering laboratory angles 0°-6° and excitation energies 6-22 MeV. Cross sections due to E1 and M1 excitations were extracted with a multipole decomposition analysis and then converted to reduced transition probabilities with the "virtual photon method" for E1 and the "unit cross section method" for M1 excitations, respectively. Including a theory-aided correction for the high excitation energy region not covered experimentally, the electric dipole polarizability was determined from the E1 strength distributions. Total photoabsorption cross sections derived from the E1 and M1 strength distributions show significant differences compared to those from previous ($γ$,xn) experiments in the energy region of the isocvector giant dipole resonance (IVGDR). The widths of the IVGDR deduced from the present data with a Lorentz parameterization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The E1 strengths below neutron threshold show fair agreement with results from ($γ$,$γ$') experiments on 112,116,120,124Sn in the energy region between 6 and 7 MeV. At higher excitation energies large differences are observed pointing to a different nature of the excited states with small ground state branching ratios. The isovector spin-M1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei. △ Less

Submitted 12 July, 2020; originally announced July 2020.

Comments: 32 pages, 23 figures, submitted to Phys. Rev. C

Journal ref: Phys. Rev. C 102, 034327 (2020)

Pressure-Induced Superconductivity in Layered Transition-metal Chalcogenides (Zr,Hf)GeTe$_{4}$ Explored by Data-driven Approach

Authors: Ryo Matsumoto, Zhufeng Hou, Shintaro Adachi, Sayaka Yamamoto, Hiromi Tanaka, Hiroyuki Takeya, Tetsuo Irifune, Kiyoyuki Terakura, Yoshihiko Takano

Abstract: Layered transition-metal chalcogenides (Zr,Hf)GeTe$_{4}$ were screened out from database of Atomwork as a candidate for pressure-induced superconductivity due to their narrow band gap and high density of state near the Fermi level. The (Zr,Hf)GeTe$_{4}$ samples were synthesized in single crystal and then the compositional ratio, crystal structures, and valence states were investigated via energy d… ▽ More Layered transition-metal chalcogenides (Zr,Hf)GeTe$_{4}$ were screened out from database of Atomwork as a candidate for pressure-induced superconductivity due to their narrow band gap and high density of state near the Fermi level. The (Zr,Hf)GeTe$_{4}$ samples were synthesized in single crystal and then the compositional ratio, crystal structures, and valence states were investigated via energy dispersive spectrometry, single crystal X-ray diffraction, and X-ray photoelectron spectroscopy, respectively. The pressure-induced superconductivity in both crystals were first time reported by using a diamond anvil cell with a boron-doped diamond electrode and an undoped diamond insulating layer. The maximum superconducting transition temperatures of ZrGeTe$_{4}$ and HfGeTe$_{4}$ were 6.5 K under 57 GPa and 6.6 K under 60 GPa, respectively. △ Less

Submitted 30 June, 2020; originally announced June 2020.

Electrical transport measurements for superconducting sulfur hydrides using boron-doped diamond electrodes on beveled diamond anvil

Authors: Ryo Matsumoto, Mari Einaga, Shintaro Adachi, Sayaka Yamamoto, Tetsuo Irifune, Kensei Terashima, Hiroyuki Takeya, Yuki Nakamoto, Katsuya Shimizu, Yoshihiko Takano

Abstract: A diamond anvil cell (DAC) which can generate extremely high pressure of multi-megabar is promising tool to develop a further physics such a high-transition temperature superconductivity. However, electrical transport measurements, which is one of the most important properties of such functional materials, using the DAC is quite difficult because the sample space is very small and a deformation of… ▽ More A diamond anvil cell (DAC) which can generate extremely high pressure of multi-megabar is promising tool to develop a further physics such a high-transition temperature superconductivity. However, electrical transport measurements, which is one of the most important properties of such functional materials, using the DAC is quite difficult because the sample space is very small and a deformation of electrodes under extreme condition. In this study, we fabricated a boron-doped diamond micro-electrode and an undoped diamond insulation on a beveled culet surface of the diamond anvil. By using the developed DAC, we demonstrated the electrical transport measurements for sulfur hydride H$_2$S which known as a pressure-induced high-transition temperature superconducting H$_3$S at high pressure. The measurements were successfully conducted under high pressure up to 192 GPa, and then a multi-step superconducting transition composed from pure sulfur and some kinds of surfer hydrides, which is possible HS$_2$, was observed with zero resistance. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Electronic phase diagram of Fe$_{1+y}$Te$_{1-x}$Se$_{x}$ revealed by magnetotransport measurements

Authors: Takao Watanabe, Takumi Otsuka, Shotaro Hagisawa, Yuta Koshika, Shintaro Adachi, Tomohiro Usui, Nae Sasaki, Seya Sasaki, Shunpei Yamaguchi, Yu Uezono, Yoshiki Nakanishi, Masahito Yoshizawa, Shojiro Kimura

Abstract: Among the Fe-based superconductors, Fe$_{1+y}$Te$_{1-x}$Se$_{x}$ is unique in that its crystal structure is the simplest and the electron correlation level is the strongest, and thus it is important to investigate the do**($x$)-temperature ($T$) phase diagram of this system. However, inevitably incorporated excess Fe currently prevents the establishment of the true phase diagram. We overcome the… ▽ More Among the Fe-based superconductors, Fe$_{1+y}$Te$_{1-x}$Se$_{x}$ is unique in that its crystal structure is the simplest and the electron correlation level is the strongest, and thus it is important to investigate the do**($x$)-temperature ($T$) phase diagram of this system. However, inevitably incorporated excess Fe currently prevents the establishment of the true phase diagram. We overcome the aforementioned significant problem via develo** a new annealing method termed as "Te-annealing" wherein single crystals are annealed under Te vapor. Specifically, we conducted various magnetotransport measurements on Te-annealed superconducting Fe$_{1+y}$Te$_{1-x}$Se$_{x}$. We observed that crossover from the incoherent to the coherent electronic state and opening of the pseudogap occurs at high temperatures ($\approx$ 150 K for $x$ = 0.2). This is accompanied by a more substantial pseudogap and the emergence of a phase with a multi-band nature at lower temperatures (below $\approx$ 50 K for $x$ = 0.2) before superconductivity sets in. Based on the results, the third type electronic phase diagram in Fe-based high-$T_c$ superconductors is revealed. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Comments: 10 pages, 5 figures, Proceedings of the International conference for ECSN-2019, Odessa, Ukraine

Journal ref: Modern Physics Letters B Vol. 34, Nos. 19 & 20 (2020) 2040051

Effect of Dy substitution in the giant magnetocaloric properties of HoB$_{2}$

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D. Yamamoto, Suguru Iwasaki, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitut… ▽ More Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitution, while the magnitude of the magnetic entropy change |$Δ\textit{S}_{M}$| at $\textit{T}$ = $\textit{T}_{C}$ decreases from 0.35 to 0.15 J cm$^{-3}$ K$^{-1}$ for a field change of 5 T. Due to the presence of two magnetic transitions in these alloys, despite the change in the peak magnitude of |$Δ\textit{S}_{M}$|, the refrigerant capacity ($\textit{RC}$) and refrigerant cooling power ($\textit{RCP}$) remains almost constant in all do** range, which as large as 5.5 J cm$^{-3}$ and 7.0 J cm$^{-3}$ for a field change of 5 T. These results imply that this series of alloys could be an exciting candidate for magnetic refrigeration in the temperature range between 10-50 K. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Comments: 19 pages, 5 figures, 2 tables

Journal ref: Science and Technology of Advanced Materials 2020

A measurement of the CMB E-mode angular power spectrum at subdegree scales from 670 square degrees of POLARBEAR data

Authors: S. Adachi, M. A. O. Aguilar Faúndez, K. Arnold, C. Baccigalupi, D. Barron, D. Beck, F. Bianchini, S. Chapman, K. Cheung, Y. Chinone, K. Crowley, M. Dobbs, H. El Bouhargani, T. Elleflot, J. Errard, G. Fabbian, C. Feng, T. Fu**o, N. Galitzki, N. Goeckner-Wald, J. Groh, G. Hall, M. Hasegawa, M. Hazumi, H. Hirose , et al. (31 additional authors not shown)

Abstract: We report a measurement of the E-mode polarization power spectrum of the cosmic microwave background (CMB) using 150 GHz data taken from July 2014 to December 2016 with the POLARBEAR experiment. We reach an effective polarization map noise level of $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ across an observation area of 670 square degrees. We measure the EE power spectrum over the angular multipole range… ▽ More We report a measurement of the E-mode polarization power spectrum of the cosmic microwave background (CMB) using 150 GHz data taken from July 2014 to December 2016 with the POLARBEAR experiment. We reach an effective polarization map noise level of $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ across an observation area of 670 square degrees. We measure the EE power spectrum over the angular multipole range $500 \leq \ell <3000$, tracing the third to seventh acoustic peaks with high sensitivity. The statistical uncertainty on E-mode bandpowers is $\sim 2.3 μ{\rm K}^2$ at $\ell \sim 1000$ with a systematic uncertainty of 0.5$μ{\rm K}^2$. The data are consistent with the standard $Λ$CDM cosmological model with a probability-to-exceed of 0.38. We combine recent CMB E-mode measurements and make inferences about cosmological parameters in $Λ$CDM as well as in extensions to $Λ$CDM. Adding the ground-based CMB polarization measurements to the Planck dataset reduces the uncertainty on the Hubble constant by a factor of 1.2 to $H_0 = 67.20 \pm 0.57 {\rm km\,s^{-1} \,Mpc^{-1}}$. When allowing the number of relativistic species ($N_{eff}$) to vary, we find $N_{eff} = 2.94 \pm 0.16$, which is in good agreement with the standard value of 3.046. Instead allowing the primordial helium abundance ($Y_{He}$) to vary, the data favor $Y_{He} = 0.248 \pm 0.012$. This is very close to the expectation of 0.2467 from Big Bang Nucleosynthesis. When varying both $Y_{He}$ and $N_{eff}$, we find $N_{eff} = 2.70 \pm 0.26$ and $Y_{He} = 0.262 \pm 0.015$. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Comments: 15 pages, 5 figures, submitted to ApJ

Journal ref: ApJ 904, 65 (2020)

Machine Learning Guided Discovery of Gigantic Magnetocaloric Effect in HoB$_{2}$ Near Hydrogen Liquefaction Temperature

Authors: Pedro Baptista de Castro, Kensei Terashima, Takafumi D Yamamoto, Zhufeng Hou, Suguru Iwasaki, Ryo Matsumoto, Shintaro Adachi, Yoshito Saito, Peng Song, Hiroyuki Takeya, Yoshihiko Takano

Abstract: Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compound… ▽ More Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compounds still remain unknown. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials which could exhibit large magnetocaloric effect. By this approach, HoB$_{2}$ is singled out, synthesized and its magnetocaloric properties are evaluated, leading to the experimental discovery of gigantic magnetic entropy change 40.1 J kg$^{-1}$ K$^{-1}$ (0.35 J cm$^{-3}$ K$^{-1}$) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to our knowledge, near the hydrogen liquefaction temperature thus it is a highly suitable material for hydrogen liquefaction and low temperature magnetic cooling applications. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Comments: 12 pages including 3 figures and 1 table + 11 pages of supplementary information. Published version available at: https://rdcu.be/b36ep

Journal ref: NPG Asia Materials 12:35 (2020)

Evolution of the dipole polarizability in the stable tin isotope chain

Authors: S. Bassauer, P. von Neumann-Cosel, P. -G. Reinhard, A. Tamii, S. Adachi, C. A. Bertulani, P. Y. Chan, G. Colò, A. D'Alessio, H. Fujioka, H. Fujita, Y. Fujita, G. Gey, M. Hilcker, T. H. Hoang, A. Inoue, J. Isaak, C. Iwamoto, T. Klaus, N. Kobayashi, Y. Maeda, M. Matsuda, N. Nakatsuka, S. Noji, H. J. Ong , et al. (14 additional authors not shown)

Abstract: The dipole polarizability of stable even-mass tin isotopes 112,114,116,118,120,124 was extracted from inelastic proton scattering experiments at 295 MeV under very forward angles performed at RCNP. Predictions from energy density functionals cannot account for the present data and the polarizability of 208Pb simultaneously. The evolution of the polarizabilities in neighboring isotopes indicates a… ▽ More The dipole polarizability of stable even-mass tin isotopes 112,114,116,118,120,124 was extracted from inelastic proton scattering experiments at 295 MeV under very forward angles performed at RCNP. Predictions from energy density functionals cannot account for the present data and the polarizability of 208Pb simultaneously. The evolution of the polarizabilities in neighboring isotopes indicates a kink at 120Sn while all model results show a nearly linear increase with mass number after inclusion of pairing corrections. △ Less

Submitted 20 July, 2020; v1 submitted 8 May, 2020; originally announced May 2020.

Comments: 10 pages, 6 figures, submitted to Phys. Lett. B

Journal ref: Phys. Lett. B 810, 135804 (2020)

$^{31}$P NMR studies of an iron-based superconductor Ba$_{0.5}$Sr$_{0.5}$Fe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$ with $T_\mathrm{c}$ = 29 K

Authors: Y. Itoh, S. Adachi

Abstract: We report $^{31}$P NMR studies of an oriented polycrystalline superconductor of Ba$_{0.5}$Sr$_{0.5}$Fe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$ with $x\sim$ 0.4 ($T_\mathrm{c}$ = 29 K) at $T$ = 14$-$325 K and $B_{0}$ = 1 and 5 T. The $^{31}$P Knight shift $K_{ab}$ at $B_{0}\perp c$ shows a nearly $T$-independent uniform spin susceptibility above $T_\mathrm{c}$ and a spin singlet decrease below… ▽ More We report $^{31}$P NMR studies of an oriented polycrystalline superconductor of Ba$_{0.5}$Sr$_{0.5}$Fe$_{2}$(As$_{1-x}$P$_{x}$)$_{2}$ with $x\sim$ 0.4 ($T_\mathrm{c}$ = 29 K) at $T$ = 14$-$325 K and $B_{0}$ = 1 and 5 T. The $^{31}$P Knight shift $K_{ab}$ at $B_{0}\perp c$ shows a nearly $T$-independent uniform spin susceptibility above $T_\mathrm{c}$ and a spin singlet decrease below $T_\mathrm{c}$. The $^{31}$P nuclear spin-lattice relaxation rate 1/$T_{1}$ shows an asymptotic behavior of $a+bT$ ($a$ and $b$ are constants) at $T >$ 100 K and the minimum at 40 K with an upturn toward $T_\mathrm{c}$. The $a$ term in 1/$T_{1}$ indicates the presence of two-dimensional antiferromagnetic spin fluctuations. The negative $θ$ = $-$15 K of the Curie-Weiss-type antiferromagnetic spin susceptibility $χ$($Q$) $\propto$ 1/($T$+$θ$) in the analysis of 1/$T_{1}T$ suggests antiferromagnetic instability in the superconducting state. Discussions are made from the self-consistent renormalization (SCR) theory for the spin fluctuations with interlayer correlation. △ Less

Submitted 24 March, 2020; originally announced March 2020.

Comments: 8 pages, 6 figures, accepted for publication in Journal of Physics: Conf. Series 2020

Journal ref: Journal of Physics: Conference Series 1590 (2020) 012011

Third Stable Branch and Tristability of Nuclear Spin Polarization in Single Quantum Dot System

Authors: Sota Yamamoto, Reina Kaji, Hirotaka Sasakura, Satoru Adachi

Abstract: Semiconductor quantum dots provide a spin-coupled system of an electron and nuclei via enhanced hyperfine interaction. We showed that the nuclear spin polarization in single quantum dots can have three stable branches under a longitudinal magnetic field. The states were accompanied by hysteresis loops around the boundaries of each branch with a change in the excitation condition. To explain these… ▽ More Semiconductor quantum dots provide a spin-coupled system of an electron and nuclei via enhanced hyperfine interaction. We showed that the nuclear spin polarization in single quantum dots can have three stable branches under a longitudinal magnetic field. The states were accompanied by hysteresis loops around the boundaries of each branch with a change in the excitation condition. To explain these findings, we incorporated the electron spin relaxation caused by the nuclear spin fluctuation into the previously-studied dynamic nuclear spin polarization mechanism. The model reproduces the new features of nuclear spin polarization and the associated strong reduction in the observed electron spin polarization, and can refer to the tristability of nuclear spin polarization. △ Less

Submitted 23 March, 2020; originally announced March 2020.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. B 101, 245424 (2020)

Demonstration of Electric Double Layer Gating under High Pressure by the Development of Field-Effect Diamond Anvil Cell

Authors: Shintaro Adachi, Ryo Matsumoto, Sayaka Yamamoto, Takafumi D. Yamamoto, Kensei Terashima, Yoshito Saito, Miren Esparza Echevarria, Pedro Baptista de Castro, Peng Song, Suguru Iwasaki, Hiroyuki Takeya, Yoshihiko Takano

Abstract: We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical ph… ▽ More We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical phenomena such as high transition-temperature superconductivity (HTS). △ Less

Submitted 23 May, 2020; v1 submitted 23 February, 2020; originally announced February 2020.

Comments: 10 pages, 4 figures

Journal ref: Appl. Phys. Lett. (2020)

Small Aperture Telescopes for the Simons Observatory

Authors: Aamir M. Ali, Shunsuke Adachi, Kam Arnold, Peter Ashton, Andrew Bazarko, Yuji Chinone, Gabriele Coppi, Lance Corbett, Kevin D Crowley, Kevin T Crowley, Mark Devlin, Simon Dicker, Shannon Duff, Chris Ellis, Nicholas Galitzki, Neil Goeckner-Wald, Kathleen Harrington, Erin Healy, Charles A Hill, Shuay-Pwu Patty Ho, Johannes Hubmayr, Brian Keating, Kenji Kiuchi, Akito Kusaka, Adrian T Lee , et al. (27 additional authors not shown)

Abstract: The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an… ▽ More The Simons Observatory (SO) is an upcoming cosmic microwave background (CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding $\sim$30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over angular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF: 225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map $\sim$10% of the sky to a noise level of 2 $μ$K-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, $r$, at a target level of $σ\left(r\right) \approx 0.003$. △ Less

Submitted 23 January, 2020; v1 submitted 21 January, 2020; originally announced January 2020.

Production Method of Millimeter-Wave Absorber with 3D-Printed Mold

Authors: S. Adachi, M. Hattori, F. Kanno, K. Kiuchi, T. Okada, O. Tajima

Abstract: We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The 3D-printed mold is made from a transparent material in the millimeter-wave range. Therefore, unmolding is not necessary. A significant benefit of this production me… ▽ More We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The 3D-printed mold is made from a transparent material in the millimeter-wave range. Therefore, unmolding is not necessary. A significant benefit of this production method is easy prototy** with various shapes and various absorptive materials. We produced a test model and used a two-component epoxy encapsulant as the absorptive material. The test model achieved a low reflectance: $\sim 1\%$ at 100 GHz. The absorber is sometimes maintained at a low temperature condition for cases in which superconducting detectors are used. Therefore, cryogenic performance is required in terms of a mechanical strength for the thermal cycles, an adhesive strength, and a sufficient thermal conductivity. We confirmed the test-model strength by immersing the model into a liquid-nitrogen bath. △ Less

Submitted 2 January, 2020; originally announced January 2020.

Comments: 3 pages, 8 figures

Restricted Boltzmann Machines for galaxy morphology classification with a quantum annealer

Authors: João Caldeira, Joshua Job, Steven H. Adachi, Brian Nord, Gabriel N. Perdue

Abstract: We present the application of Restricted Boltzmann Machines (RBMs) to the task of astronomical image classification using a quantum annealer built by D-Wave Systems. Morphological analysis of galaxies provides critical information for studying their formation and evolution across cosmic time scales. We compress galaxy images using principal component analysis to fit a representation on the quantum… ▽ More We present the application of Restricted Boltzmann Machines (RBMs) to the task of astronomical image classification using a quantum annealer built by D-Wave Systems. Morphological analysis of galaxies provides critical information for studying their formation and evolution across cosmic time scales. We compress galaxy images using principal component analysis to fit a representation on the quantum hardware. Then, we train RBMs with discriminative and generative algorithms, including contrastive divergence and hybrid generative-discriminative approaches, to classify different galaxy morphologies. The methods we compare include Quantum Annealing (QA), Markov Chain Monte Carlo (MCMC) Gibbs Sampling, and Simulated Annealing (SA) as well as machine learning algorithms like gradient boosted decision trees. We find that RBMs implemented on D-Wave hardware perform well, and that they show some classification performance advantages on small datasets, but they don't offer a broadly strategic advantage for this task. During this exploration, we analyzed the steps required for Boltzmann sampling with the D-Wave 2000Q, including a study of temperature estimation, and examined the impact of qubit noise by comparing and contrasting the original D-Wave 2000Q to the lower-noise version recently made available. While these analyses ultimately had minimal impact on the performance of the RBMs, we include them for reference. △ Less

Submitted 13 February, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Comments: 15 pages; LaTeX; 14 figures

Report number: FERMILAB-PUB-19-546-QIS-SCD

Crystal Size Improvement of Bi-based Superconducting Whiskers under Stress-controlled Condition

Authors: Sayaka Yamamoto, Ryo Matsumoto, Shintaro Adachi, Yoshihiko Takano, Hiroyuki Muto, Hiromi Tanaka

Abstract: Using stress-controlled amorphous precursors, we have successfully grown large $Bi_{2}$$Sr_{2}$$Ca_{\textit{n}-1}$$Cu_{\textit{n}}$$O_{\textit{y}}$ (Bi-based) high-transition temperature superconducting whiskers. Especially, under a high compressive stress attained by 1 GPa pelletizing, the crystal size of a whisker was significantly enhanced up to 9.5 mm length (growth period: 96 h) which is 2.4… ▽ More Using stress-controlled amorphous precursors, we have successfully grown large $Bi_{2}$$Sr_{2}$$Ca_{\textit{n}-1}$$Cu_{\textit{n}}$$O_{\textit{y}}$ (Bi-based) high-transition temperature superconducting whiskers. Especially, under a high compressive stress attained by 1 GPa pelletizing, the crystal size of a whisker was significantly enhanced up to 9.5 mm length (growth period: 96 h) which is 2.4 times larger than that of the conventional amorphous-precursors method. In addition, by using the stress-controlled precursors, the number of the obtained Bi-based whiskers were also increased by a factor of 1.8. △ Less

Submitted 1 November, 2019; originally announced November 2019.

A Measurement of the Degree Scale CMB B-mode Angular Power Spectrum with POLARBEAR

Authors: S. Adachi, M. A. O. Aguilar Faúndez, K. Arnold, C. Baccigalupi, D. Barron, D. Beck, S. Beckman, F. Bianchini, D. Boettger, J. Borrill, J. Carron, S. Chapman, K. Cheung, Y. Chinone, K. Crowley, A. Cukierman, M. Dobbs, H. El Bouhargani, T. Elleflot, J. Errard, G. Fabbian, C. Feng, T. Fu**o, N. Galitzki, N. Goeckner-Wald , et al. (47 additional authors not shown)

Abstract: We present a measurement of the $B$-mode polarization power spectrum of the cosmic microwave background (CMB) using taken from July 2014 to December 2016 with the POLARBEAR experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of $\mathrm{NET}_\mathrm{array}=23\, μ\mathrm{K} \sqrt{\mathrm{s}}$ on a 670 square degree patch of sky center… ▽ More We present a measurement of the $B$-mode polarization power spectrum of the cosmic microwave background (CMB) using taken from July 2014 to December 2016 with the POLARBEAR experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of $\mathrm{NET}_\mathrm{array}=23\, μ\mathrm{K} \sqrt{\mathrm{s}}$ on a 670 square degree patch of sky centered at (RA, Dec)=($+0^\mathrm{h}12^\mathrm{m}0^\mathrm{s},-59^\circ18^\prime$). A continuously rotating half-wave plate is used to modulate polarization and to suppress low-frequency noise. We achieve $32\,μ\mathrm{K}$-$\mathrm{arcmin}$ effective polarization map noise with a knee in sensitivity of $\ell = 90$, where the inflationary gravitational wave signal is expected to peak. The measured $B$-mode power spectrum is consistent with a $Λ$CDM lensing and single dust component foreground model over a range of multipoles $50 \leq \ell \leq 600$. The data disfavor zero $C_\ell^{BB}$ at $2.2σ$ using this $\ell$ range of POLARBEAR data alone. We cross-correlate our data with Planck high frequency maps and find the low-$\ell$ $B$-mode power in the combined dataset to be consistent with thermal dust emission. We place an upper limit on the tensor-to-scalar ratio $r < 0.90$ at 95% confidence level after marginalizing over foregrounds. △ Less

Submitted 7 October, 2019; originally announced October 2019.

Journal ref: ApJ 897, 55 (2020)

Internal delensing of Cosmic Microwave Background polarization B-modes with the POLARBEAR experiment

Authors: S. Adachi, M. A. O. Aguilar Faúndez, Y. Akiba, A. Ali, K. Arnold, C. Baccigalupi, D. Barron, D. Beck, F. Bianchini, J. Borrill, J. Carron, K. Cheung, Y. Chinone, K. Crowley, H. El Bouhargani, T. Elleflot, J. Errard, G. Fabbian, C. Feng, T. Fu**o, N. Goeckner-Wald, M. Hasegawa, M. Hazumi, C. A. Hill, L. Howe , et al. (29 additional authors not shown)

Abstract: Using only cosmic microwave background polarization data from the POLARBEAR experiment, we measure $B$-mode polarization delensing on subdegree scales at more than $5σ$ significance. We achieve a 14% $B$-mode power variance reduction, the highest to date for internal delensing, and improve this result to 2% by applying for the first time an iterative maximum a posteriori delensing method. Our anal… ▽ More Using only cosmic microwave background polarization data from the POLARBEAR experiment, we measure $B$-mode polarization delensing on subdegree scales at more than $5σ$ significance. We achieve a 14% $B$-mode power variance reduction, the highest to date for internal delensing, and improve this result to 2% by applying for the first time an iterative maximum a posteriori delensing method. Our analysis demonstrates the capability of internal delensing as a means of improving constraints on inflationary models, paving the way for the optimal analysis of next-generation primordial $B$-mode experiments. △ Less

Submitted 1 April, 2020; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: Matches version published in Physical Review Letters

Journal ref: Phys. Rev. Lett. 124, 131301 (2020)

Role of the inner copper-oxide plane in interlayer Josephson effects in multi-layered cuprate superconductors

Authors: Y. Nomura, R. Okamoto, T. Mizuno, S. Adachi, T. Watanabe, M. Suzuki, I. Kakeya

Abstract: We find systematic signatures suggesting a different superconducting nature for a triple-layered cuprate Bi$_2$Sr$_2$Ca$_2$Cu$_3$O$_{10+δ}$ with respect to a double-layer through the properties of intrinsic Josephson junctions (IJJs). Our measurements on the current-voltage characteristics reveal that the $c$-axis maximum Josephson current density is sensitive to the superfluid density in outer pl… ▽ More We find systematic signatures suggesting a different superconducting nature for a triple-layered cuprate Bi$_2$Sr$_2$Ca$_2$Cu$_3$O$_{10+δ}$ with respect to a double-layer through the properties of intrinsic Josephson junctions (IJJs). Our measurements on the current-voltage characteristics reveal that the $c$-axis maximum Josephson current density is sensitive to the superfluid density in outer planes while the critical temperature and the superconducting gap remain unaffected. Switching dynamics of stacked IJJs exhibit that the fluctuation in gauge-invariant phase difference of an IJJ implies that the inner plane completely shields the capacitive coupling between adjacent IJJs, which is essential for mono- and bilayered cuprates. △ Less

Submitted 27 September, 2019; originally announced September 2019.

Comments: 10 pages, 2 figures

Journal ref: Phys. Rev. B 100, 144515 (2019)

Absum: Simple Regularization Method for Reducing Structural Sensitivity of Convolutional Neural Networks

Authors: Sekitoshi Kanai, Yasutoshi Ida, Yasuhiro Fujiwara, Masanori Yamada, Shuichi Adachi

Abstract: We propose Absum, which is a regularization method for improving adversarial robustness of convolutional neural networks (CNNs). Although CNNs can accurately recognize images, recent studies have shown that the convolution operations in CNNs commonly have structural sensitivity to specific noise composed of Fourier basis functions. By exploiting this sensitivity, they proposed a simple black-box a… ▽ More We propose Absum, which is a regularization method for improving adversarial robustness of convolutional neural networks (CNNs). Although CNNs can accurately recognize images, recent studies have shown that the convolution operations in CNNs commonly have structural sensitivity to specific noise composed of Fourier basis functions. By exploiting this sensitivity, they proposed a simple black-box adversarial attack: Single Fourier attack. To reduce structural sensitivity, we can use regularization of convolution filter weights since the sensitivity of linear transform can be assessed by the norm of the weights. However, standard regularization methods can prevent minimization of the loss function because they impose a tight constraint for obtaining high robustness. To solve this problem, Absum imposes a loose constraint; it penalizes the absolute values of the summation of the parameters in the convolution layers. Absum can improve robustness against single Fourier attack while being as simple and efficient as standard regularization methods (e.g., weight decay and L1 regularization). Our experiments demonstrate that Absum improves robustness against single Fourier attack more than standard regularization methods. Furthermore, we reveal that robust CNNs with Absum are more robust against transferred attacks due to decreasing the common sensitivity and against high-frequency noise than standard regularization methods. We also reveal that Absum can improve robustness against gradient-based attacks (projected gradient descent) when used with adversarial training. △ Less

Submitted 19 September, 2019; originally announced September 2019.

Comments: 16 pages, 39 figures