-
Reflectionless propagation of beams through a stratified medium
Authors:
Sounak Sinha Biswas,
Ghanasyam Remesh,
Venu Gopal Achanta,
Ayan Banerjee,
Nirmalya Ghosh,
Subhasish Dutta Gupta
Abstract:
Reflectionless potentials following the prescription of Kay and Moses allow for total transmission of incoming waves of any kinetic energy. The optical analogue of such potentials occur as dielectric stratified media that can offer null reflectivity and near total transmission over a large range of incidence angles and wavelengths. In a previous work (S. Dutta Gupta and G. S. Agarwal, Opt. Express…
▽ More
Reflectionless potentials following the prescription of Kay and Moses allow for total transmission of incoming waves of any kinetic energy. The optical analogue of such potentials occur as dielectric stratified media that can offer null reflectivity and near total transmission over a large range of incidence angles and wavelengths. In a previous work (S. Dutta Gupta and G. S. Agarwal, Opt. Express 15, 9614-9624, 2007), this was demonstrated for linearly polarized plane waves. We extend the earlier work valid for plane waves to structured beams to show near-total transmission of beams across the reflectionless dielectric profile. The analysis is based on the angular spectrum decomposition treating the beam as a collection of plane waves. Gaussian and Laguerre-Gaussian beams are shown to be transmitted through the film with <1% reflection in most scenarios. We also discuss the superlative performance of our proposed profile in preserving the beam shape during transmission comparing these results to a conventional lambda/2 antireflection coating.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Interplay of plasmonics and strain for Hexagonal Boron Nitride emission engineering
Authors:
Anuj Kumar Singh,
Utkarsh,
Pablo Tieben,
Kishor Kumar Mandal,
Brijesh Kumar,
Rishabh Vij,
Amrita Majumder,
Ikshvaku Shyam,
Shagun Kumar,
Kenji Watanabe,
Takashi Taniguchi,
Venu Gopal Achanta,
Andreas Schell,
Anshuman Kumar
Abstract:
In the realm of quantum information and sensing, there has been substantial interest in the single-photon emission associated with defects in hexagonal boron nitride (hBN). With the goal of producing deterministic emission centers, in this work, we present a platform for engineering emission in hBN integrated with gold truncated nanocone structures. Our findings highlights that, the activation of…
▽ More
In the realm of quantum information and sensing, there has been substantial interest in the single-photon emission associated with defects in hexagonal boron nitride (hBN). With the goal of producing deterministic emission centers, in this work, we present a platform for engineering emission in hBN integrated with gold truncated nanocone structures. Our findings highlights that, the activation of emission is due to the truncated gold nanocones. Furthermore, we measure the quantum characteristics of this emission and find that while our system demonstrates support for single-photon emission, the origin of this emission remains ambiguous. Specifically, it is unclear whether the emission arises from defects generated by the induced strain or from alternative defect mechanisms. This uncertainty stems from the fluorescence properties inherent to gold, complicating our definitive attribution of the quantum emission source. To provide a rigorous theoretical foundation, we elucidate the effects of strain via the Kirchhoff-Love theory. Additionally, the enhancements observed due to plasmonic effects are comprehensively explained through the resolution of Maxwell's equations. This study will be useful for the development of deterministic and tunable single photonic sources in two dimensional materials and their integration with plasmonic platforms.
△ Less
Submitted 21 January, 2024;
originally announced January 2024.
-
Emission engineering in monolithically integrated silicon nitride microring resonators
Authors:
Kishor Kumar Mandal,
Anuj Kumar Singh,
Brijesh Kumar,
Amit P. Shah,
Rishabh Vij,
Amrita Majumder,
Janhavi Jayawant Khunte,
Venu Gopal Achanta,
Anshuman Kumar
Abstract:
Monolithic integration of solid-state color centers with photonic elements of the same material is a promising approach to overcome the constraints of fabrication complexity and coupling losses in traditional hybrid integration approaches. A wide band-gap, low-loss silicon nitride (SiN) platform is a mature technology, having CMOS compatibility, widely used in hybrid integrated photonics and optoe…
▽ More
Monolithic integration of solid-state color centers with photonic elements of the same material is a promising approach to overcome the constraints of fabrication complexity and coupling losses in traditional hybrid integration approaches. A wide band-gap, low-loss silicon nitride (SiN) platform is a mature technology, having CMOS compatibility, widely used in hybrid integrated photonics and optoelectronics. However, it has been shown that certain growth conditions enable the SiN material to host color centers, whose origin is currently under investigation. In this work, we have engineered a novel technique for the efficient coupling of these intrinsic emitters into the whispering gallery modes (WGMs) of the SiN microring cavity -- which has not been explored previously. We have engineered a subwavelength-sized notch into the rim of the SiN microring structure, to optimize the collection efficiency of the cavity-coupled enhanced photoluminescence (PL) spectra at room temperature. The platform presented in this work will enable the development of monolithic integration of color centers with nanophotonic elements for application to quantum photonic technologies.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Enhanced beam shifts mediated by Bound States in Continuum
Authors:
Sounak Sinha Biswas,
Ghanasyam Remesh,
Venu Gopal Achanta,
Ayan Banerjee,
Nirmalya Ghosh,
Subhasish Dutta Gupta
Abstract:
The interaction of light beams with resonant structures has led to the development of various optical platforms for sensing, particle manipulation, and strong light-matter interaction. In the current study, we investigate the manifestations of the bound states in continuum (BIC) on the in plane and out of plane shifts (referred to as Goos-Hanchen (GH) and Imbert-Fedorov (IF) shifts, respectively)…
▽ More
The interaction of light beams with resonant structures has led to the development of various optical platforms for sensing, particle manipulation, and strong light-matter interaction. In the current study, we investigate the manifestations of the bound states in continuum (BIC) on the in plane and out of plane shifts (referred to as Goos-Hanchen (GH) and Imbert-Fedorov (IF) shifts, respectively) of a finite beam with specific polarization incident at an arbitrary angle. Based on the angular spectrum decomposition, we develop a generic formalism for understanding the interaction of the finite beam with an arbitrary stratified medium with isotropic and homogeneous components. it is applied to the case of a Gaussian beam with p and circularly polarized light incident on a symmetric structure containing two polar dielectric layers separated by a spacer layer. For p-polarized plane wave incidence one of the coupled Berreman modes of the structure was recently shown to evolve to the bound state with infinite localization and diverging quality factor coexisting with the other mode with large radiation leakage (Remesh et al. Optics Communications, 498:127223, 2021). A small deviation from the ideal BIC resonance still offers resonances with very high quality factors and these are exploited in this study to report giant GH shifts. A notable enhancement in the IF shift for circularly polarized light is also shown. Moreover, the reflected beam is shown to undergo distortion leading to a satellite spot. The origin of such a splitting of the reflected beam is traced to a destructive interference due to the left and right halves of the corresponding spectra.
△ Less
Submitted 21 May, 2023; v1 submitted 10 March, 2023;
originally announced March 2023.
-
A low cost plasmonic platform for photon emission engineering of two dimensional semiconductors
Authors:
Anuj Kumar Singh,
Kishor K Mandal,
Yashika Gupta,
Abhay Anand VS,
Lekshmi Eswaramoorthy,
Brijesh Kumar,
Abhinav Kala,
Saurabh Dixit,
Venu Gopal Achanta,
Anshuman Kumar
Abstract:
Although the field of 2D materials has democratized materials science by making high quality samples accessible cheaply, due to the atomically thin nature of these systems, an integration with nanostructures is almost always required to obtain a significant optical response. Traditionally, these nanostructures are fabricated via electron beam lithography or focused ion beam milling, which are expe…
▽ More
Although the field of 2D materials has democratized materials science by making high quality samples accessible cheaply, due to the atomically thin nature of these systems, an integration with nanostructures is almost always required to obtain a significant optical response. Traditionally, these nanostructures are fabricated via electron beam lithography or focused ion beam milling, which are expensive and large area fabrication can be further time consuming. In order to overcome this problem, we report the integration of 2D semiconductors on a cost-effective and large area fabricated nanocone platform. We show that the plasmon modes of our nanocone structures lead to photoluminescence (PL) enhancement of monolayer WSe$_2$ by about eight to ten times compared to the non-plasmonic case, consistent with finite-difference time-domain simulations. Excitation power-dependent measurements reveal that our nanocone platform enables a versatile route to engineering the relative exciton trion contributions to the emission.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Exploring the route from leaky Berreman modes to bound states in continuum
Authors:
Ghanasyam Remesh,
Pravin Vaity,
Venu Gopal Achanta,
Subhasish Dutta Gupta
Abstract:
We study coupling of leaky Berreman modes in polar dielectric films (SiO2) through a thin metallic layer (gold) and show the familiar signatures of normal mode splitting. Due to very large negative real part of the dielectric function of gold, the splitting shows up only for extremely thin coupling layers. In contrast, coupling of Berreman modes through a dielectric spacer layer reveals novel poss…
▽ More
We study coupling of leaky Berreman modes in polar dielectric films (SiO2) through a thin metallic layer (gold) and show the familiar signatures of normal mode splitting. Due to very large negative real part of the dielectric function of gold, the splitting shows up only for extremely thin coupling layers. In contrast, coupling of Berreman modes through a dielectric spacer layer reveals novel possibilities of having bound states in continuum, albeit in the limit of vanishing losses. It is shown that the corresponding dispersion branches of the symmetric and antisymmetric modes can cross. BIC is shown to occur on one of these branches which is characterized by lower loss. In fact the BIC corresponds to the point where the radiative losses are minimized. For thicker layers (both spacer and the polar dielectric) BIC is shown to occur on the higher order dispersion branches. The origin of BIC is traced to the Fabry-Perot type mechanism due to the excitation of the leaky guided modes in the central layer.
△ Less
Submitted 12 June, 2021;
originally announced June 2021.
-
Nanophotonic structures with optical surface modes for tunable spin current generation
Authors:
P. V. Shilina,
D. O. Ignatyeva,
P. O. Kapralov,
S. K. Sekatskii,
M. Nur-E-Alam,
M. Vasiliev,
K. Alameh,
V. G. Achanta,
Y. Song,
S. M. Hamidi,
A. K. Zvezdin,
V. I. Belotelov
Abstract:
Heat generated by spin currents in spintronics-based devices is typically much less than that generated by charge current flows in conventional electronic devices. However, the conventional approaches for excitation of spin currents based on spin-pum** and spin Hall effect are limited in efficiency which restricts their application for viable spintronic devices. We propose a novel type of photon…
▽ More
Heat generated by spin currents in spintronics-based devices is typically much less than that generated by charge current flows in conventional electronic devices. However, the conventional approaches for excitation of spin currents based on spin-pum** and spin Hall effect are limited in efficiency which restricts their application for viable spintronic devices. We propose a novel type of photonic-crystal (PC) based structures for efficient and tunable optically-induced spin current generation via the Spin Seebeck and inverse spin Hall effects. It is experimentally demonstrated that optical surface modes localized at the PC surface covered by ferromagnetic layer and materials with giant spin-orbit coupling (SOC) notably increase the efficiency of the optically-induced spin current generation and provides its tunability by modifying light wavelength or angle of incidence. Up to 100% of the incident light power can be transferred to heat within the SOC layer and, therefore, to spin current. Importantly, high efficiency becomes accessible even for ultra-thin SOC layers. Moreover, surface patterning of the PC-based spintronic nanostructure allows local generation of spin currents at the pattern scales rather than diameter of the laser beam.
△ Less
Submitted 7 December, 2020; v1 submitted 5 November, 2020;
originally announced November 2020.
-
Hot carrier dynamics in a dispersionless plasmonic system
Authors:
Banoj Kumar Nayak,
S. S. Prabhu,
Venu Gopal Achanta
Abstract:
Hot carrier dynamics in a dispersionless plasmonic structures over a broad wavelength are studied by pump-probe measurements with 45 fs time resolution. The role of direct excited as well as plasmon generated hot carriers on low energy probe plasmons are studied by simultaneous measurement of differential transmittance and reflectance. While the pump fluence dependence on the decay times is linear…
▽ More
Hot carrier dynamics in a dispersionless plasmonic structures over a broad wavelength are studied by pump-probe measurements with 45 fs time resolution. The role of direct excited as well as plasmon generated hot carriers on low energy probe plasmons are studied by simultaneous measurement of differential transmittance and reflectance. While the pump fluence dependence on the decay times is linear for hot electrons and plasmon generated hot electrons, when pump is near resonant with the X- symmetry point, decay time varied as square of pump fluence. Decay times of 800 nm degenerate pump-probe measurements highlight the difference in surface (reflection) and the bulk (transmission) mechanisms. Decay time corresponding to the hot carrier relaxation is in the 1 -3 ps range for different excitation energies. Rise time, governed by the plasmon to hot carrier conversion and electron - electron scattering processes, is about 200 fs for the hot carrier and hot plasmon excitation cases which increased to about 485 fs for when pump is resonant with interband transition at X- symmetry point.
△ Less
Submitted 22 July, 2019; v1 submitted 3 May, 2019;
originally announced May 2019.
-
Reflection confocal nanoscopy using a super-oscillatory lens
Authors:
Arvind Nagarajan,
L. Pjotr Stoevelaar,
Fabrizio Silvestri,
Marijn Siemons,
Venu Gopal Achanta,
Stefan M. B. Bäumer,
Giampiero Gerini
Abstract:
A Superoscillatory lens (SOL) is known to produce a sub-diffraction hotspot which is useful for high-resolution imaging. However, high-energy rings called sidelobes coexist with the central hotspot. Additionally, SOLs have not yet been directly used to image reflective objects due to low efficiency and poor imaging properties. We propose a novel reflection confocal nanoscope which mitigates these…
▽ More
A Superoscillatory lens (SOL) is known to produce a sub-diffraction hotspot which is useful for high-resolution imaging. However, high-energy rings called sidelobes coexist with the central hotspot. Additionally, SOLs have not yet been directly used to image reflective objects due to low efficiency and poor imaging properties. We propose a novel reflection confocal nanoscope which mitigates these issues by relaying the SOL intensity pattern onto the object and use conventional optics for detection. We experimentally demonstrate super-resolution by imaging double bars with 330 nm separation using a 632.8 nm excitation and a 0.95 NA objective. We also discuss the enhanced contrast properties of the SOL nanoscope against a laser confocal microscope, and the degradation of performance while imaging large objects.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Design, Fabrication and Characterization of nanoplasmonic lattice for trap** of ultracold atoms
Authors:
Sunil Kumar,
Manav Shah,
Ajith P. Ravishankar,
Chetan Vishwakarma,
Arindam Dasgupta,
Jay Mangaonkar,
Venu Gopal Achanta,
Umakant D. Rapol
Abstract:
Ultracold atom-traps on a chip enhances the practical application of atom traps in quantum information processing, sensing, and metrology. Plasmon mediated near-field optical potentials are promising for trap** atoms. The combination of plasmonic nanostructures and ultracold atoms has the potential to create a two dimensional array of neutral atoms with lattice spacing smaller than that of latti…
▽ More
Ultracold atom-traps on a chip enhances the practical application of atom traps in quantum information processing, sensing, and metrology. Plasmon mediated near-field optical potentials are promising for trap** atoms. The combination of plasmonic nanostructures and ultracold atoms has the potential to create a two dimensional array of neutral atoms with lattice spacing smaller than that of lattices created from interfering light fields -- the optical lattices. We report the design, fabrication and characterization of a nano-scale array of near-field optical traps for neutral atoms using plasmonic nanostructures. The building block of the array is a metallic nano-disc fabricated on the surface of an ITO-coated glass substrate. We numerically simulate the electromagnetic field-distribution using Finite Difference Time Domain method around the nanodisc, and calculate the intensity, optical potential and the dipole force for $^{87}$Rb atoms. The optical near-field generated from the fabricated nanostructures is experimentally characterized by using Near-field Scanning Optical Microscopy. We find that the optical potential and dipole force has all the desired characteristics to trap cold atoms when a blue-detuned light-field is used to excite the nanostructures. This trap can be used for effective trap** and manipulation of isolated atoms and also for creating a lattice of neutral atoms having sub-optical wavelength lattice spacing. Near-field measurements are affected by the influence of tip on the sub-wavelength structure. We present a deconvolution method to extract the actual near-field profile from the measured data.
△ Less
Submitted 24 October, 2018;
originally announced October 2018.
-
Microscopic Characterisation of Photo Detectors from CMS Hadron Calorimeter
Authors:
R A Shukla,
V G Achanta,
P D Barbaro,
S R Dugad,
A Heering,
S K Gupta,
I Mirza,
S S Prabhu,
P Rumerio
Abstract:
The CMS hadron Calorimeter is made of alternating layers of scintillating tiles and metals, such as brass or iron. The original photo detectors were hybrid units with a single accelerating gap called Hybrid Photo Diodes (HPD). Scintillating light was transmitted to the HPDs by means of optical fibers. During data taking at the Large Hadron Collider (LHC), the signal strength of scintillator tiles…
▽ More
The CMS hadron Calorimeter is made of alternating layers of scintillating tiles and metals, such as brass or iron. The original photo detectors were hybrid units with a single accelerating gap called Hybrid Photo Diodes (HPD). Scintillating light was transmitted to the HPDs by means of optical fibers. During data taking at the Large Hadron Collider (LHC), the signal strength of scintillator tiles of detector units in the forward region degraded significantly due to the damage related to the amount of radiation to which the scintillator was exposed to. Scintillators suffer damage when exposed to radiation, however, the amount of damage observed was more than originally estimated. Several HPDs were removed during a detector shut down period. Microscopic scans of relative quantum efficiencies for few of these HPDs were made. The damage of the photocathode was determined to vary with the amount of optical signal transmitted by optical fibers to the HPD. Imprints of each fiber (1 mm) on the photocathode with varying damage within the same pixel were observed. Most of the observed reduction of the calorimeter signal can be attributed to localised damage of the photocathode.
△ Less
Submitted 26 June, 2018;
originally announced June 2018.
-
A Broadband Superabsorber at Optical Frequencies: Design and Demonstration
Authors:
Arvind Nagarajan,
Kumar Vivek,
Manav Shah,
Venu Gopal Achanta,
Giampiero Gerini
Abstract:
Metasurface based super absorbers exhibit near unity absorbance. While the absorption peak can be tuned by the geometry/size of the sub-wavelength resonator, broadband absorption can be obtained by placing multiple resonators of various size or shapes in a unit cell. Metal dispersion hinders high performance broadband absorption at optical frequencies and careful designing is essential to achieve…
▽ More
Metasurface based super absorbers exhibit near unity absorbance. While the absorption peak can be tuned by the geometry/size of the sub-wavelength resonator, broadband absorption can be obtained by placing multiple resonators of various size or shapes in a unit cell. Metal dispersion hinders high performance broadband absorption at optical frequencies and careful designing is essential to achieve good structures. We propose a novel analytical framework for designing a broadband super absorber which is much faster than the time consuming full wave simulations that are employed so far. Analytical expressions are derived for the wavelength dependency of the design parameters, which are then used in the optimization of broadband absorption. Numerical simulations report an average polarization-independent absorption of ~97 in the 450 to 950 nm spectral region with a near unity absorption (99.36) in the 500 to 850 nm region. Experimentally, we demonstrate an average absorption over 98 in the 450 to 950 nm spectral region at 20 degree incident angle The designed super absorber is polarization insensitive and has a weak launch angle dependency. The proposed framework simplifies the design process and provides a quicker optimal solution for high performance broadband super absorbers.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
-
Magnetoplasmonic Quasicrystals
Authors:
Andrey N. Kalish,
Roman S. Komarov,
Mikhail A. Kozhaev,
Venu Gopal Achanta,
Sarkis A. Dagesyan,
Alexander N. Shaposhnikov,
Anatoly R. Prokopov,
Vladimir N. Berzhansky,
Anatoly K. Zvezdin,
Vladimir I. Belotelov
Abstract:
Nanostructured magneto-optical materials sustaining optical resonances open very efficient way for light control via magnetic field, which is of prime importance for telecommunication and sensing applications. However, usually their response is narrowband due to its resonance character. Here we demonstrate and investigate a novel type of the magnetoplasmonic structure, the magnetoplasmonic quasicr…
▽ More
Nanostructured magneto-optical materials sustaining optical resonances open very efficient way for light control via magnetic field, which is of prime importance for telecommunication and sensing applications. However, usually their response is narrowband due to its resonance character. Here we demonstrate and investigate a novel type of the magnetoplasmonic structure, the magnetoplasmonic quasicrystal, which demonstrates unique magneto-optical response. It consists of the magnetic dielectric film covered by a thin gold layer perforated by slits forming a Fibonacci-like binary sequence. The transverse magneto-optical Kerr effect (TMOKE) acquires controllable multiple plasmon-related resonances resulting in a magneto-optical response in a wide frequency range. The broadband TMOKE is valuable for numerous nanophotonics applications including optical sensing, control of light, all-optical control of magnetization etc. On the other hand, TMOKE spectroscopy is an efficient tool for investigation of the peculiarities of plasmonic quasicrystals.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Observation of Spin Nernst effect in Platinum
Authors:
Arnab Bose,
Swapnil Bhuktare,
Hanuman Singh,
Venu Gopal Achanta,
Ashwin Tulapurkar
Abstract:
Central focus of spintronics is concentrated on generation of pure spin current and associated spin torque. Pure spin current can be generated by spin Hall effect in heavy metals by passing charge current. By spin Seebeck effect pure spin current can also be generated in ferromagnet. In this work we experimentally demonstrate that if heavy metals like Platinum with high spin orbit coupling carry h…
▽ More
Central focus of spintronics is concentrated on generation of pure spin current and associated spin torque. Pure spin current can be generated by spin Hall effect in heavy metals by passing charge current. By spin Seebeck effect pure spin current can also be generated in ferromagnet. In this work we experimentally demonstrate that if heavy metals like Platinum with high spin orbit coupling carry heat current it can convert it into spin current due to relativistic spin orbit interaction. This conversion of heat current into spin current in non magnet is equivalent of thermally driven spin Hall effect or it is known as spin Nernst effect. We observed spin Nernst effect in Ni/Pt bi-layer experimentally and we confirm that when Pt is replaced by low spin orbit material like Al spin Nernst effect significantly reduces. So we have detected spin Nernst effect unambiguously and compare its strength with electrical spin Hall effect.
△ Less
Submitted 22 April, 2017;
originally announced April 2017.
-
Enhancement of electron hot spot relaxation in photoexcited plasmonic structures by thermal diffusion
Authors:
F. Spitzer,
B. A. Glavin,
V. I. Belotelov,
J. Vondran,
I. A. Akimov,
S. Kasture,
V. G. Achanta,
D. R. Yakovlev,
M. Bayer
Abstract:
We demonstrate that in confined plasmonic metal structures subject to ultra-fast laser excitation electron thermal diffusion can provide relaxation faster than the energy transfer to the lattice. This relaxation occurs due to excitation of nanometer-sized hot spots in the confined structure and the sensitivity of its optical parameters to the perturbation in these regions. Both factors become esse…
▽ More
We demonstrate that in confined plasmonic metal structures subject to ultra-fast laser excitation electron thermal diffusion can provide relaxation faster than the energy transfer to the lattice. This relaxation occurs due to excitation of nanometer-sized hot spots in the confined structure and the sensitivity of its optical parameters to the perturbation in these regions. Both factors become essential when the plasmonic resonance condition is met for both excitation and detection. A pump-probe experiment on plasmonic gold lattices shows sub-picosecond relaxation with the characteristic times well-described by a two-temperature model. The results suggest that dynamical optical response in plasmonic structures can be tuned by selection of the structural geometry as well as the choice of wavelength and polarization of the excitation and detection light.
△ Less
Submitted 13 May, 2016;
originally announced May 2016.
-
Metasurfaces for suppressing reflection over broadband
Authors:
Anuradha Patra,
Ajith P. Ravishankar,
Arvind Nagarajan,
Venu Gopal Achanta
Abstract:
Surfaces patterned with arrays of quasi-periodic air holes having conical depth profile have been studied for their effectiveness in suppressing air-substrate reflection in the wavelength range of 450-1350 nm (limited by our measurement). The role of quasi-periodic air-hole pattern, depth of holes and launch angle on the observed antireflection behavior are investigated. The average optical transm…
▽ More
Surfaces patterned with arrays of quasi-periodic air holes having conical depth profile have been studied for their effectiveness in suppressing air-substrate reflection in the wavelength range of 450-1350 nm (limited by our measurement). The role of quasi-periodic air-hole pattern, depth of holes and launch angle on the observed antireflection behavior are investigated. The average optical transmittance of the patterned quartz substrate at near normal incidence is more than 97% and reflectance is less than 2%. Patterned quartz surfaces with 450 nm thin graded rarefaction region maintain the antireflective property up to 30° (limited by our measurements) angle of incidence.
△ Less
Submitted 1 March, 2015;
originally announced March 2015.
-
Physical, optical and nonlinear properties of InS single crystal
Authors:
Pallavi Kushwaha,
Anuradha Patra,
E. Anjali,
Harshad Surdi,
C. Gurada,
S. Ramakrishnan,
S. S. Prabhu,
Venu Gopal Achanta,
A. Thamizhavel
Abstract:
Indium Sulphide (InS) single crystals are successfully grown by In flux. Single crystal X-ray diffraction shows orthorhombic structure of Pnnm space group. Ellipsometry measurements performed on the (010) oriented crystal exhibit low anisotropy in the 300-1000 nm wavelength range and consequently negligible THz emission is observed. Optical band gap of $2.09 eV$ is deduced from linear optical meas…
▽ More
Indium Sulphide (InS) single crystals are successfully grown by In flux. Single crystal X-ray diffraction shows orthorhombic structure of Pnnm space group. Ellipsometry measurements performed on the (010) oriented crystal exhibit low anisotropy in the 300-1000 nm wavelength range and consequently negligible THz emission is observed. Optical band gap of $2.09 eV$ is deduced from linear optical measurements. Nonlinear optical properties are studied by single beam Z-scan measurements at 800 nm, where two-photon absorption is present. Nonlinear refractive index and absorption coefficient are estimated to be $η_2$ = $2.3 10^{-11} cm^2/W$ and $β$= $62.4 cm/ GW$, respectively for excitation intensity of $0.32 GW/cm^2$. The origin of nonlinearity in InS crystal is accounted to be due to the third-order anharmonic motion of the bound electrons.
△ Less
Submitted 28 September, 2013;
originally announced September 2013.
-
Strong coupling of in-plane plasmon modes and their control
Authors:
Sachin Kasture,
Prasanta Mandal,
S. Dutta Gupta,
Venu Gopal Achanta
Abstract:
We show anti-crossings due to strong in-plane coupling of plasmon modes in dielectric-metal-dielectric structure with top 2D dielectric pattern. Experimentally measured anti-crossing widths are compared with those calculated by coupled mode theory. It is shown that the coupling strength of the plasmon modes can be controlled by the orientation of the sample.
We show anti-crossings due to strong in-plane coupling of plasmon modes in dielectric-metal-dielectric structure with top 2D dielectric pattern. Experimentally measured anti-crossing widths are compared with those calculated by coupled mode theory. It is shown that the coupling strength of the plasmon modes can be controlled by the orientation of the sample.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Assembling of three-dimensional crystals by large nonequilibrium depletion force
Authors:
Hai-Dong Deng,
Ting Sun,
Zhi-Cheng Fu,
Hai-Ying Liu,
Qiao-Feng Dai,
Li-Jun Wu,
Sheng Lan,
Venu Gopal Achanta
Abstract:
We propose and demonstrate a method to achieve large effective Soret coefficient in colloids by suitably mixing two different particles, e.g., silica beads and Fe3O4 nanoparticles. It is shown that the thermophoretic motion of Fe3O4 nanoparticles out of the heating region results in a large nonequlibrium depletion force for silica beads. Consequently, silica beads are driven quickly to the heating…
▽ More
We propose and demonstrate a method to achieve large effective Soret coefficient in colloids by suitably mixing two different particles, e.g., silica beads and Fe3O4 nanoparticles. It is shown that the thermophoretic motion of Fe3O4 nanoparticles out of the heating region results in a large nonequlibrium depletion force for silica beads. Consequently, silica beads are driven quickly to the heating region, forming a three-dimensional crystal with few defects and dislocations. The binding of silica beads is so tight that a colloidal photonic crystal can be achieved after the complete evaporation of solvent, water. Thus, for fabrication of defect free colloidal PCs, periodic structures for molecular sieves, among others, the proposed technique could be a low cost alternative. In addition as we use biocompatible materials, this technique could be a tool for biophysics studies where the potential of large effective Soret coefficient could be useful.
△ Less
Submitted 14 December, 2010;
originally announced December 2010.