-
Bistatic Radar Observations of Near-Earth Asteroid (163899) 2003 SD220 from the Southern Hemisphere
Authors:
Shinji Horiuchi,
Blake Molyneux,
Jamie B. Stevens,
Graham Baines,
Craig Benson,
Zohair Abu-Shaban,
Jon D. Giorgini,
Lance A. M. Benner,
Shantanu P. Naidu,
Chris J. Phillips,
Philip G. Edwards,
Ed Kruzins,
Nick J. S. Stacy,
Martin A. Slade,
John E. Reynolds,
Joseph Lazio
Abstract:
We report results of Canberra-ATCA Doppler-only continuous wave (CW) radar observations of near-Earth asteroid (163899) 2003 SD220 at a receiving frequency of 7159 MHz (4.19 cm) on 2018 December 20, 21, and 22 during its close approach within 0.019 au (7.4 lunar distances). Echo power spectra provide evidence that the shape is significantly elongated, asymmetric, and has at least one relatively la…
▽ More
We report results of Canberra-ATCA Doppler-only continuous wave (CW) radar observations of near-Earth asteroid (163899) 2003 SD220 at a receiving frequency of 7159 MHz (4.19 cm) on 2018 December 20, 21, and 22 during its close approach within 0.019 au (7.4 lunar distances). Echo power spectra provide evidence that the shape is significantly elongated, asymmetric, and has at least one relatively large concavity. An average spectrum per track yields an OC (opposite sense of circular polarisation) radar cross section of 0.39, 0.27, and 0.25 km$^{2}$, respectively, with an uncertainty of 35 \%. Variations by roughly a factor of two in the limb-to-limb bandwidth over the three days indicate rotation of an elongated object. We obtain a circular polarization ratio of 0.21 $\pm$ 0.07 that is consistent with, but somewhat lower than, the average among other S-class near-Earth asteroids observed by radar.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Near-field Localization with a Reconfigurable Intelligent Surface Acting as Lens
Authors:
Zohair Abu-Shaban,
Kamran Keykhosravi,
Musa Furkan Keskin,
George C. Alexandropoulos,
Gonzalo Seco-Granados,
Henk Wymeersch
Abstract:
Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to…
▽ More
Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to reception radio frequency chain. We perform a Fisher information analysis, evaluate the impact of different lens configurations, and propose a two-stage localization algorithm. Our results indicate that positional beamforming can lead to better performance when a priori location information is available, while random beamforming is preferred when a priori information is lacking. Our simulation results for a moderate size lens operating at 28 GHz showcased that decimeter-level accuracy can be attained within 3 meters to the lens.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Performance Analysis for Autonomous Vehicle 5G-Assisted Positioning in GNSS-Challenged Environments
Authors:
Zohair Abu-Shaban,
Gonzalo Seco-Granados,
Craig R. Benson,
Henk Wymeersch
Abstract:
Standalone Global Navigation Satellite Systems (GNSS) are known to provide positioning accuracy of a few meters in open sky conditions. This accuracy can drop significantly when the line-of-sight (LOS) paths to some GNSS satellites are obstructed, e.g., in urban canyons or underground tunnels. To overcome this issue, the general approach is usually to augment GNSS systems with other dedicated subs…
▽ More
Standalone Global Navigation Satellite Systems (GNSS) are known to provide positioning accuracy of a few meters in open sky conditions. This accuracy can drop significantly when the line-of-sight (LOS) paths to some GNSS satellites are obstructed, e.g., in urban canyons or underground tunnels. To overcome this issue, the general approach is usually to augment GNSS systems with other dedicated subsystems to help cover the gaps arising from obscured LOS. Positioning in 5G has attracted some attention lately, mainly due to the possibility to provide cm-level accuracy using 5G signals and infrastructure, effectively imposing no additional cost. In this paper, we study the hybridization of GNSS and 5G positioning in terms of achievable position and velocity error bounds. We focus on scenarios where satellite visibility is constrained by the environment geometry, and where the GNSS and 5G positioning systems fail to perform individually or provide a prohibitively large error.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Localization Error Bounds For 5G mmWave Systems Under I/Q Imbalance: An Extended Version
Authors:
Fariba Ghaseminajm,
Zohair Abu-Shaban,
Salama S. Ikki,
Henk Wymeersch,
Craig R. Benson
Abstract:
Location awareness is expected to play a significant role in 5G millimeter-wave (mmWave) communication systems. One of the basic elements of these systems is quadrature amplitude modulation (QAM), which has in-phase and quadrature (I/Q) modulators. It is not uncommon for transceiver hardware to exhibit an imbalance in the I/Q components, causing degradation in data rate and signal quality. Under a…
▽ More
Location awareness is expected to play a significant role in 5G millimeter-wave (mmWave) communication systems. One of the basic elements of these systems is quadrature amplitude modulation (QAM), which has in-phase and quadrature (I/Q) modulators. It is not uncommon for transceiver hardware to exhibit an imbalance in the I/Q components, causing degradation in data rate and signal quality. Under an amplitude and phase imbalance model at both the transmitter and receiver, 2D positioning performance in 5G mmWave systems is considered. Towards that, we derive the position and orientation error bounds and study the effects of the I/Q imbalance parameters on the derived bounds. The numerical results reveal that I/Q imbalance impacts the performance similarly, whether it occurs at the transmitter or the receiver, and can cause a degradation up to 12% in position and orientation estimation accuracy.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Single-Anchor Two-Way Localization Bounds for 5G mmWave Systems
Authors:
Zohair Abu-Shaban,
Henk Wymeersch,
Thushara Abhayapala,
Gonzalo Seco-Granados
Abstract:
Recently, millimeter-wave (mmWave) 5G localization has been shown to be to provide centimeter-level accuracy, lending itself to many location-aware applications, e.g., connected autonomous vehicles (CAVs). One assumption usually made in the investigation of localization methods is that the user equipment (UE), i.e., a CAV, and the base station (BS) are {time} synchronized. In this paper, we remove…
▽ More
Recently, millimeter-wave (mmWave) 5G localization has been shown to be to provide centimeter-level accuracy, lending itself to many location-aware applications, e.g., connected autonomous vehicles (CAVs). One assumption usually made in the investigation of localization methods is that the user equipment (UE), i.e., a CAV, and the base station (BS) are {time} synchronized. In this paper, we remove this assumption and investigate two two-way localization protocols: (i) a round-trip localization protocol (RLP), whereby the BS and UE exchange signals in two rounds of transmission and then localization is achieved using the signal received in the second round; (ii) a collaborative localization protocol (CLP), whereby localization is achieved using the signals received in the two rounds. We derive the position and orientation error bounds applying beamforming at both ends and compare them to the traditional one-way localization. Our results show that mmWave localization is mainly limited by the angular rather than the temporal estimation and that CLP significantly outperforms RLP. Our simulations also show that it is more beneficial to have more antennas at the BS than at the UE.
△ Less
Submitted 6 April, 2020; v1 submitted 6 May, 2018;
originally announced May 2018.
-
Harnessing NLOS Components for Position and Orientation Estimation in 5G mmWave MIMO
Authors:
Rico Mendrzik,
Henk Wymeersch,
Gerhard Bauch,
Zohair Abu-Shaban
Abstract:
In the past, NLOS propagation was shown to be a source of distortion for radio-based positioning systems. Every NLOS component was perceived as a perturbation which resulted from the lack of temporal and spatial resolution of previous cellular systems. Even though 5G is not yet standardized, a strong proposal, which has the potential to overcome the problem of limited temporal and spatial resoluti…
▽ More
In the past, NLOS propagation was shown to be a source of distortion for radio-based positioning systems. Every NLOS component was perceived as a perturbation which resulted from the lack of temporal and spatial resolution of previous cellular systems. Even though 5G is not yet standardized, a strong proposal, which has the potential to overcome the problem of limited temporal and spatial resolution, is the massive MIMO millimeter wave technology. Based on this proposal, we reconsider the role of NLOS components for 5G position and orientation estimation purposes. Our analysis is based on the concept of Fisher information. We show that, for sufficiently high temporal and spatial resolution, NLOS components always provide position and orientation information which consequently increases position and orientation estimation accuracy. We show that the information gain of NLOS components depends on the actual location of the reflector or scatter. Our numerical examples suggest that NLOS components are most informative about the position and orientation of a mobile terminal when corresponding reflectors or scatterers are illuminated with narrow beams.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Error Bounds for Uplink and Downlink 3D Localization in 5G mmWave Systems
Authors:
Zohair Abu-Shaban,
Xiangyun Zhou,
Thushara Abhayapala,
Gonzalo Seco-Granados,
Henk Wymeersch
Abstract:
Location-aware communication systems are expected to play a pivotal part in the next generation of mobile communication networks. Therefore, there is a need to understand the localization limits in these networks, particularly, using millimeter-wave technology (mmWave). Towards that, we address the uplink and downlink localization limits in terms of 3D position and orientation error bounds for mmW…
▽ More
Location-aware communication systems are expected to play a pivotal part in the next generation of mobile communication networks. Therefore, there is a need to understand the localization limits in these networks, particularly, using millimeter-wave technology (mmWave). Towards that, we address the uplink and downlink localization limits in terms of 3D position and orientation error bounds for mmWave multipath channels. We also carry out a detailed analysis of the dependence of the bounds of different systems parameters. Our key findings indicate that the uplink and downlink behave differently in two distinct ways. First of all, the error bounds have different scaling factors with respect to the number of antennas in the uplink and downlink. Secondly, uplink localization is sensitive to the orientation angle of the user equipment (UE), whereas downlink is not. Moreover, in the considered outdoor scenarios, the non-line-of-sight paths generally improve localization when a line-of-sight path exists. Finally, our numerical results show that mmWave systems are capable of localizing a UE with sub-meter position error, and sub-degree orientation error.
△ Less
Submitted 4 March, 2018; v1 submitted 11 April, 2017;
originally announced April 2017.
-
Interference Mitigating Satellite Broadcast Receiver using Reduced Complexity List-Based Detection in Correlated Noise
Authors:
Zohair Abu-Shaban,
Hani Mehrpouyan,
Bhavani Shankar M. R.,
Bjorn Ottersten
Abstract:
The recent commercial trends towards using smaller dish antennas for satellite receivers, and the growing density of broadcasting satellites, necessitate the application of robust adjacent satellite interference (ASI) cancellation schemes. This orbital density growth along with the wider beamwidth of a smaller dish have imposed an overloaded scenario at the satellite receiver, where the number of…
▽ More
The recent commercial trends towards using smaller dish antennas for satellite receivers, and the growing density of broadcasting satellites, necessitate the application of robust adjacent satellite interference (ASI) cancellation schemes. This orbital density growth along with the wider beamwidth of a smaller dish have imposed an overloaded scenario at the satellite receiver, where the number of transmitting satellites exceeds the number of receiving elements at the dish antenna. To ensure successful operation in this practical scenario, we propose a satellite receiver that enhances signal detection from the desired satellite by mitigating the interference from neighboring satellites. Towards this objective, we propose a reduced complexity list-based group-wise search detection (RC-LGSD) receiver under the assumption of spatially correlated additive noise. To further enhance detection performance, the proposed satellite receiver utilizes a newly designed whitening filter to remove the spatial correlation amongst the noise parameters, while also applying a preprocessor that maximizes the signal-to-interference-plus-noise ratio (SINR). Extensive simulations under practical scenarios show that the proposed receiver enhances the performance of satellite broadcast systems in the presence of ASI compared to existing methods.
△ Less
Submitted 25 April, 2014;
originally announced April 2014.
-
Overloaded Satellite Receiver Using SIC with Hybrid Beamforming and ML Detection
Authors:
Zohair Abu-Shaban,
Hani Mehrpouyan,
Joel Grotz,
Bjorn Ottersten
Abstract:
In this paper, a new receiver structure that is intended to detect the signals from multiple adjacent satellites in the presence of other interfering satellites is proposed. We tackle the worst case interference conditions, i.e., it is assumed that uncoded signals that fully overlap in frequency arrive at a multiple-element small-size parabolic antenna in a spatially correlated noise environment.…
▽ More
In this paper, a new receiver structure that is intended to detect the signals from multiple adjacent satellites in the presence of other interfering satellites is proposed. We tackle the worst case interference conditions, i.e., it is assumed that uncoded signals that fully overlap in frequency arrive at a multiple-element small-size parabolic antenna in a spatially correlated noise environment. The proposed successive interference cancellation (SIC) receiver, denoted by SIC Hy/ML, employs hybrid beamforming and disjoint maximum likelihood (ML) detection. Depending on the individual signals spatial position, the proposed SIC Hy/ML scheme takes advantage of two types of beamformers: a maximum ratio combining (MRC) beamformer and a compromised array response (CAR) beamformer. The performance of the proposed receiver is compared to an SIC receiver that uses only MRC beamforming scheme with ML detection for all signals, a joint ML detector, and a minimum mean square error detector. It is found that SIC Hy/ML outperforms the other schemes by a large margin.
△ Less
Submitted 17 April, 2014;
originally announced April 2014.
-
Enhanced List-Based Group-Wise Overloaded Receiver with Application to Satellite Reception
Authors:
Zohair Abu-Shaban,
Bhavani Shankar M. R,
Hani Mehrpouyan,
Bjorn Ottersten
Abstract:
The market trends towards the use of smaller dish antennas for TV satellite receivers, as well as the growing density of broadcasting satellites in orbit require the application of robust adjacent satellite interference (ASI) cancellation algorithms at the receivers. The wider beamwidth of a small size dish and the growing number of satellites in orbit impose an overloaded scenario, i.e., a scenar…
▽ More
The market trends towards the use of smaller dish antennas for TV satellite receivers, as well as the growing density of broadcasting satellites in orbit require the application of robust adjacent satellite interference (ASI) cancellation algorithms at the receivers. The wider beamwidth of a small size dish and the growing number of satellites in orbit impose an overloaded scenario, i.e., a scenario where the number of transmitting satellites exceeds the number of receiving antennas. For such a scenario, we present a two stage receiver to enhance signal detection from the satellite of interest, i.e., the satellite that the dish is pointing to, while reducing interference from neighboring satellites. Towards this objective, we propose an enhanced List-based Group-wise Search Detection (LGSD) receiver architecture that takes into account the spatially correlated additive noise and uses the signal-to-interference-plus noise ratio (SINR) maximization criterion to improve detection performance. Simulations show that the proposed receiver structure enhances the performance of satellite systems in the presence of ASI when compared to existing methods.
△ Less
Submitted 17 April, 2014;
originally announced April 2014.
