-
Aging effects in the COMPASS hybrid GEM-Micromegas pixelized detectors
Authors:
Damien Neyret,
Philippe Abbon,
Marc Anfreville,
Vincent Andrieux,
Yann Bedfer,
Dominique Durand,
Sébastien Herlant,
Nicole d'Hose,
Fabienne Kunne,
Stephane Platchkov,
Florian Thibaud,
Michel Usseglio,
Maxence Vandenbroucke
Abstract:
Large-size hybrid and pixelized GEM-Micromegas gaseous detectors (40x40 cm$^2$ active area) were developed and installed in 2014 and 2015 for the COMPASS2 physics program which started at the same time. That program involved in particular two full years of Drell-Yan studies using a high-intensity pion beam on a thick polarized target. Although the detectors were placed behind a thick absorber, the…
▽ More
Large-size hybrid and pixelized GEM-Micromegas gaseous detectors (40x40 cm$^2$ active area) were developed and installed in 2014 and 2015 for the COMPASS2 physics program which started at the same time. That program involved in particular two full years of Drell-Yan studies using a high-intensity pion beam on a thick polarized target. Although the detectors were placed behind a thick absorber, they were exposed to an important flux of low energy neutrons and photons. The detectors were designed to drastically reduce the discharge rate, a major issue for non-resistive Micromegas in high hadron flux, by a factor of more than 100 compared to the former ones. A hybrid solution was chosen where a pre-amplifying GEM foil is placed 2 mm above the micromesh electrode. A pixelized readout was also added in the center of the detector, where the beam is going through, in order to track particles scattered at very low angles. The combination of the hybrid structure and the pixelized central readout allowed the detector to be operated in an environment with particle flux above 10 MHz/cm$^2$ with very good detection efficiencies and spatial resolution. The performance has remained stable since 2015 in terms of gain and resolution, showing the interest of hybrid structures associating a GEM foil to a Micromegas board to protect gaseous detectors against discharges and aging effects
△ Less
Submitted 20 June, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
Design, operation and performance of the PAON4 prototype transit interferometer
Authors:
R. Ansari,
J. E Campagne,
D. Charlet,
M. Moniez,
C. Pailler,
O. Perdereau,
M. Taurigna,
J. M. Martin,
F. Rigaud,
P. Colom,
Ph. Abbon,
Ch. Magneville,
J. Pezzani,
C. Viou,
S. A. Torchinsky,
Q. Huang,
J. Zhang
Abstract:
PAON4 is an L-band (1250-1500 MHz) small interferometer operating in transit mode deployed at the Nançay observatory in France, designed as a prototype instrument for Intensity Map**. It features four 5~meter diameter dishes in a compact triangular configuration, with a total geometric collecting area of $\sim75 \mathrm{m^2}$, and equipped with dual polarization receivers. A total of 36 visibili…
▽ More
PAON4 is an L-band (1250-1500 MHz) small interferometer operating in transit mode deployed at the Nançay observatory in France, designed as a prototype instrument for Intensity Map**. It features four 5~meter diameter dishes in a compact triangular configuration, with a total geometric collecting area of $\sim75 \mathrm{m^2}$, and equipped with dual polarization receivers. A total of 36 visibilities are computed from the 8 independent RF signals by the software correlator over the full 250~MHz RF band. The array operates in transit mode, with the dishes pointed toward a fixed declination, while the sky drifts across the instrument. Sky maps for each frequency channel are then reconstructed by combining the time-dependent visibilities from the different baselines observed at different declinations. This paper presents an overview of the PAON4 instrument design and goals, as a prototype for dish arrays to map the Large Scale Structure in radio, using intensity map** of the atomic hydrogen $21~\mathrm{cm}$ line. We operated PAON4 over several years and use data from observations in different periods to assess the array performance. We present preliminary analysis of a large fraction of this data and discuss crucial issues for this type of instrument, such as the calibration strategy, instrument response stability, and noise behaviour.
△ Less
Submitted 8 February, 2020; v1 submitted 17 October, 2019;
originally announced October 2019.
-
Fast and Efficient Detection of 511 keV Photons using Cherenkov Light in PbF$_2$ Crystal coupled to a MCP-PMT and SAMPIC Digitization Module
Authors:
C. Canot,
M. Alokhina,
P. Abbon,
J. P. Bard,
D. Breton,
E. Delagnes,
J. Maalmi,
G. Tauzin,
D. Yvon,
V. Sharyy
Abstract:
We study the possibility to use the Cherenkov light for the efficient detection of 511 keV photons with the goal to use it in TOF-PET. We designed and tested two detection modules consisting of PbF$_2$ crystals attached to Planacon MCP-PMT XP85012. Amplified PMT signals are digitized by the SAMPIC module with high readout rate, up to $10^5$ events/s, and a negligible contribution to the time resol…
▽ More
We study the possibility to use the Cherenkov light for the efficient detection of 511 keV photons with the goal to use it in TOF-PET. We designed and tested two detection modules consisting of PbF$_2$ crystals attached to Planacon MCP-PMT XP85012. Amplified PMT signals are digitized by the SAMPIC module with high readout rate, up to $10^5$ events/s, and a negligible contribution to the time resolution, below 20 ps (FWHM). We developed a fast 2D scanning system to calibrate the PMT time response and studied in details the timing characteristics of the Planacon PMT. Using a radioactive $^{22}$Na source we measured a detection efficiency of 24% for 511 keV photons in a 10 mm thick crystal and a coincidence resolving time of 280 ps. We analyzed the main factors limiting the time resolution of the large-surface detection module and proposed solutions to improve it, which will be tested in our future project.
△ Less
Submitted 14 November, 2019; v1 submitted 13 September, 2019;
originally announced September 2019.
-
The COMPASS Setup for Physics with Hadron Beams
Authors:
Ph. Abbon,
C. Adolph,
R. Akhunzyanov,
Yu. Alexandrov,
M. G. Alexeev,
G. D. Alexeev,
A. Amoroso,
V. Andrieux,
V. Anosov,
A. Austregesilo,
B. Badelek,
F. Balestra,
J. Barth,
G. Baum,
R. Beck,
Y. Bedfer,
A. Berlin,
J. Bernhard,
K. Bicker,
E. R. Bielert,
J. Bieling,
R. Birsa,
J. Bisplinghoff,
M. Bodlak,
M. Boer
, et al. (207 additional authors not shown)
Abstract:
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well…
▽ More
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successfully used with positive and negative hadron beams and with liquid hydrogen and solid nuclear targets. This article describes the new and upgraded detectors and auxiliary equipment, outlines the reconstruction procedures used, and summarises the general performance of the setup.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
New pixelized Micromegas detector with low discharge rate for the COMPASS experiment
Authors:
Damien Neyret,
Philippe Abbon,
Marc Anfreville,
Yann Bedfer,
Etienne Burtin,
Christophe Coquelet,
Nicole d'Hose,
Daniel Desforge,
Arnaud Giganon,
Didier Jourde,
Fabienne Kunne,
Alain Magnon,
Nour Makke,
Claude Marchand,
Bernard Paul,
Stéphane Platchkov,
Florian Thibaud,
Michel Usseglio,
Maxence Vandenbroucke
Abstract:
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^{2}, 10 times larger than for the present Micr…
▽ More
New Micromegas (Micro-mesh gaseous detectors) are being developed in view of the future physics projects planned by the COMPASS collaboration at CERN. Several major upgrades compared to present detectors are being studied: detectors standing five times higher luminosity with hadron beams, detection of beam particles (flux up to a few hundred of kHz/mm^{2}, 10 times larger than for the present Micromegas detectors) with pixelized read-out in the central part, light and integrated electronics, and improved robustness. Two solutions of reduction of discharge impact have been studied, with Micromegas detectors using resistive layers and using an additional GEM foil. Performance of such detectors has also been measured. A large size prototypes with nominal active area and pixelized read-out has been produced and installed at COMPASS in 2010. In 2011 prototypes featuring an additional GEM foil, as well as an resistive prototype, are installed at COMPASS and preliminary results from those detectors presented very good performance. We present here the project and report on its status, in particular the performance of large size prototypes with an additional GEM foil.
△ Less
Submitted 25 January, 2012; v1 submitted 14 November, 2011;
originally announced November 2011.
-
Pattern recognition and PID for COMPASS RICH-1
Authors:
P. Abbon,
M. Alexeev,
H. Angerer,
R. Birsa,
P. Bordalo,
F. Bradamante,
A. Bressan,
M. Chiosso,
P. Ciliberti,
M. L. Colantoni,
T. Dafni,
S. Dalla Torre,
E. Delagnes,
O. Denisov,
H. Deschamps,
V. Diaz,
N. Dibiase,
V. Duic,
W. Eyrich,
A. Ferrero,
M. Finger,
M. Finger Jr,
H. Fischer,
S. Gerassimov,
M. Giorgi
, et al. (44 additional authors not shown)
Abstract:
A package for pattern recognition and PID by COMPASS RICH-1 has been developed and used for the analysis of COMPASS data collected in the years 2002 to 2004, and 2006-2007 with the upgraded RICH-1 photon detectors. It has allowed the full characterization of the detector in the starting version and in the upgraded one, as well as the PID for physics results. We report about the package structure…
▽ More
A package for pattern recognition and PID by COMPASS RICH-1 has been developed and used for the analysis of COMPASS data collected in the years 2002 to 2004, and 2006-2007 with the upgraded RICH-1 photon detectors. It has allowed the full characterization of the detector in the starting version and in the upgraded one, as well as the PID for physics results. We report about the package structure and algorithms, and the detector characterization and PID results.
△ Less
Submitted 3 February, 2009;
originally announced February 2009.
-
The COMPASS Experiment at CERN
Authors:
COMPASS Collaboration,
P. Abbon
Abstract:
The COMPASS experiment makes use of the CERN SPS high-intensitymuon and hadron beams for the investigation of the nucleon spin structure and the spectroscopy of hadrons. One or more outgoing particles are detected in coincidence with the incoming muon or hadron. A large polarized target inside a superconducting solenoid is used for the measurements with the muon beam. Outgoing particles are dete…
▽ More
The COMPASS experiment makes use of the CERN SPS high-intensitymuon and hadron beams for the investigation of the nucleon spin structure and the spectroscopy of hadrons. One or more outgoing particles are detected in coincidence with the incoming muon or hadron. A large polarized target inside a superconducting solenoid is used for the measurements with the muon beam. Outgoing particles are detected by a two-stage, large angle and large momentum range spectrometer. The setup is built using several types of tracking detectors, according to the expected incident rate, required space resolution and the solid angle to be covered. Particle identification is achieved using a RICH counter and both hadron and electromagnetic calorimeters. The setup has been successfully operated from 2002 onwards using a muon beam. Data with a hadron beam were also collected in 2004. This article describes the main features and performances of the spectrometer in 2004; a short summary of the 2006 upgrade is also given.
△ Less
Submitted 30 March, 2007;
originally announced March 2007.
-
The Micromegas detector of the CAST experiment
Authors:
P. Abbon,
S. Andriamonje,
S. Aune,
T. Dafni,
M. Davenport,
E. Delagnes,
R. de Oliveira,
G. Fanourakis,
E. Ferrer Ribas,
J. Franz,
T. Geralis,
M. Gros,
Y. Giomataris,
I. G. Irastorza,
K. Kousouris,
J. Morales,
T. Papaevangelou,
J. Ruz,
K. Zachariadou,
K. Zioutas
Abstract:
A low background Micromegas detector has been operating in the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector, made out of low radioactivity materials, operated efficiently and achieved a very low level of background rejection (5 x 10^-5 counts/keV/cm^2/s) without shielding.
A low background Micromegas detector has been operating in the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector, made out of low radioactivity materials, operated efficiently and achieved a very low level of background rejection (5 x 10^-5 counts/keV/cm^2/s) without shielding.
△ Less
Submitted 22 February, 2007;
originally announced February 2007.
-
A low background Micromegas detector for the CAST experiment
Authors:
P. Abbon,
S. Andriamonje,
S. Aune,
D. Besin,
S. Cazaux,
P. Contrepois,
T. Dafni,
T. Decker,
N. Duportail,
G. Fanourakis,
E. Ferrer Ribas,
T. Geralis,
A. Giganon,
I. Giomataris,
M. Gros,
R. Hill,
I. G. Irastorza,
K. Kousouris,
J. Morales,
M. Pivovaroff,
M. Riallot,
R. Soufli,
K. Zachariadou,
G. Zaffanela
Abstract:
A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity m…
▽ More
A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity materials used in the construction of the detector. For the second phase of the experiment (2005-2007), the detector will be upgraded by adding a shielding and including focusing optics. These improvements should allow for a background rejection better than two orders of magnitude.
△ Less
Submitted 28 October, 2005;
originally announced October 2005.
