-
Thermophoresis and its effect on particle impaction on a cylinder for low and moderate Reynolds numbers
Authors:
Nils Erland L. Haugen,
Jonas Krüger,
Jørgen R. Aarnes,
Ewa Karchniwy,
Adam Klimanek
Abstract:
The effect of thermophoresis on the impaction of particles on a cylinder is investigated for different particle sizes, particle conductivities, temperature gradients and for Reynolds numbers between 100 and 1600. Simulations are performed using the Pencil Code, a high-order finite difference code. An overset-grid method is used to precisely simulate the flow around the cylinder. The ratio of parti…
▽ More
The effect of thermophoresis on the impaction of particles on a cylinder is investigated for different particle sizes, particle conductivities, temperature gradients and for Reynolds numbers between 100 and 1600. Simulations are performed using the Pencil Code, a high-order finite difference code. An overset-grid method is used to precisely simulate the flow around the cylinder. The ratio of particles impacting the cylinder and the number of particles inserted upstream of the cylinder is used to calculate an impaction efficiency. It is found that both the particle conductivity and the temperature gradient have a close to linear influence on the particle impaction efficiency for small particles. Higher Reynolds numbers result in higher impaction efficiency for middle-sized particles, while the impaction efficiency is smaller for smaller particles. In general, it is found that thermophoresis only has an effect on the small particles, while for larger particles the impaction efficiency is controlled by inertial impaction.
Finally, an algebraic model, developed based on fundamental principles, which describes the effect of thermophoresis is presented. The model is found to accurately predict the DNS results. As such, this model can be used to understand the mechanisms behind particle deposition due to the thermophoretic force, and, more importantly, to identify means by which the deposition rate can be reduced.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
The Pencil Code, a modular MPI code for partial differential equations and particles: multipurpose and multiuser-maintained
Authors:
A. Brandenburg,
A. Johansen,
P. A. Bourdin,
W. Dobler,
W. Lyra,
M. Rheinhardt,
S. Bingert,
N. E. L. Haugen,
A. Mee,
F. Gent,
N. Babkovskaia,
C. -C. Yang,
T. Heinemann,
B. Dintrans,
D. Mitra,
S. Candelaresi,
J. Warnecke,
P. J. Käpylä,
A. Schreiber,
P. Chatterjee,
M. J. Käpylä,
X. -Y. Li,
J. Krüger,
J. R. Aarnes,
G. R. Sarson
, et al. (12 additional authors not shown)
Abstract:
The Pencil Code is a highly modular physics-oriented simulation code that can be adapted to a wide range of applications. It is primarily designed to solve partial differential equations (PDEs) of compressible hydrodynamics and has lots of add-ons ranging from astrophysical magnetohydrodynamics (MHD) to meteorological cloud microphysics and engineering applications in combustion. Nevertheless, the…
▽ More
The Pencil Code is a highly modular physics-oriented simulation code that can be adapted to a wide range of applications. It is primarily designed to solve partial differential equations (PDEs) of compressible hydrodynamics and has lots of add-ons ranging from astrophysical magnetohydrodynamics (MHD) to meteorological cloud microphysics and engineering applications in combustion. Nevertheless, the framework is general and can also be applied to situations not related to hydrodynamics or even PDEs, for example when just the message passing interface or input/output strategies of the code are to be used. The code can also evolve Lagrangian (inertial and noninertial) particles, their coagulation and condensation, as well as their interaction with the fluid.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Treatment of solid objects in the Pencil Code using an immersed boundary method and overset grids
Authors:
Jørgen R. Aarnes,
Tai **,
Chaoli Mao,
Nils E. L. Haugen,
Kun Luo,
Helge I. Andersson
Abstract:
Two methods for solid body representation in flow simulations available in the Pencil Code are the immersed boundary method and overset grids. These methods are quite different in terms of computational cost, flexibility and numerical accuracy. We present here an investigation of the use of the different methods with the purpose of assessing their strengths and weaknesses. At present, the overset…
▽ More
Two methods for solid body representation in flow simulations available in the Pencil Code are the immersed boundary method and overset grids. These methods are quite different in terms of computational cost, flexibility and numerical accuracy. We present here an investigation of the use of the different methods with the purpose of assessing their strengths and weaknesses. At present, the overset grid method in the Pencil Code can only be used for representing cylinders in the flow. For this task it surpasses the immersed boundary method in yielding highly accurate solutions at moderate computational costs. This is partly due to local grid stretching and a body-conformal grid, and partly due to the possibility of working with local time step restrictions on different grids. The immersed boundary method makes up the lack of computational efficiency with flexibility in regards to application to complex geometries, due to a recent extension of the method that allows our implementation of it to represent arbitrarily shaped objects in the flow.
△ Less
Submitted 18 June, 2018;
originally announced June 2018.
-
High-order overset grid method for detecting particle impaction on a cylinder in a cross flow
Authors:
J. R. Aarnes,
N. E. L. Haugen,
H. I. Andersson
Abstract:
An overset grid method was used to investigate the interaction between a particle-laden flow and a circular cylinder. The overset grid method was implemented in the Pencil Code , a high-order finite-difference code for compressible flow simulation. High-order summation-by-part operators were used at the cylinder boundary, and both bi-linear Lagrangian and bi-quadratic spline interpolation was used…
▽ More
An overset grid method was used to investigate the interaction between a particle-laden flow and a circular cylinder. The overset grid method was implemented in the Pencil Code , a high-order finite-difference code for compressible flow simulation. High-order summation-by-part operators were used at the cylinder boundary, and both bi-linear Lagrangian and bi-quadratic spline interpolation was used to communicate between the background grid and the body-conformal cylindrical grid. The performance of the overset grid method was assessed to benchmark cases of steady and unsteady flows past a cylinder. For steady flow at low Reynolds number, high-order accuracy was achieved for velocity components. Results for flow in the vortex shedding regime showed good agreement to the literature. The method was also applied to particle-laden flow simulations, where spherical point particles were inserted upstream of the cylinder. These inertial particles were convected towards and (possibly) past the cylinder. The simulations reproduced data from the literature at a significantly reduced cost, revealing that the previously published DNS data is less accurate than assumed for particles with very small Stokes numbers.
△ Less
Submitted 3 July, 2018; v1 submitted 25 May, 2018;
originally announced May 2018.
