-
Discovery of an asteroid family linked to (22) Kalliope and its moon Linus
Authors:
M. Brož,
M. Ferrais,
P. Vernazza,
P. Ševeček,
M. Jutzi
Abstract:
According to adaptive-optics observations by Ferrais et al., (22) Kalliope is a 150-km, dense and differentiated body. Here, we interpret (22) Kalliope in the context of bodies in its surroundings. While there is a known moon Linus, with a 5:1 size ratio, no family has been reported in the literature, which is in contradiction with the existence of the moon. Using the hierarchical clustering metho…
▽ More
According to adaptive-optics observations by Ferrais et al., (22) Kalliope is a 150-km, dense and differentiated body. Here, we interpret (22) Kalliope in the context of bodies in its surroundings. While there is a known moon Linus, with a 5:1 size ratio, no family has been reported in the literature, which is in contradiction with the existence of the moon. Using the hierarchical clustering method (HCM) along with physical data, we identified the Kalliope family. Previously, it was associated to (7481) San Marcello. We then used various models (N-body, Monte-Carlo, SPH) of its orbital and collisional evolution, including the break-up of the parent body, to estimate the dynamical age of the family and address its link to Linus. The best-fit age is (900+-100) My according to our collisional model, in agreement with the position of (22) Kalliope, which was modified by chaotic diffusion due to 4-1-1 three-body resonance with Jupiter and Saturn. It seems possible to create Linus and the Kalliope family at the same time, although our SPH simulations show a variety of outcomes, for both satellite size and the family size-frequency distribution. The shape of (22) Kalliope itself was most likely affected by gravitational reaccumulation of `streams', which creates characteristic hills observed on the surface. If the body was differentiated, its internal structure is surely asymmetric.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Physical and dynamical characterization of the Euphrosyne asteroid Family
Authors:
B. Yang,
J. Hanus,
M. Broz,
O. Chrenko,
M. Willman,
P. Sevecek,
J. Masiero,
H. Kaluna
Abstract:
The Euphrosyne asteroid family occupies a unique zone in orbital element space around 3.15 au and may be an important source of the low-albedo near-Earth objects. The parent body of this family may have been one of the planetesimals that delivered water and organic materials onto the growing terrestrial planets. We aim to characterize the compositional properties as well as the dynamical propertie…
▽ More
The Euphrosyne asteroid family occupies a unique zone in orbital element space around 3.15 au and may be an important source of the low-albedo near-Earth objects. The parent body of this family may have been one of the planetesimals that delivered water and organic materials onto the growing terrestrial planets. We aim to characterize the compositional properties as well as the dynamical properties of the family. We performed a systematic study to characterize the physical properties of the Euphrosyne family members via low-resolution spectroscopy using the IRTF telescope. In addition, we performed smoothed-particle hydrodynamics (SPH) simulations and N-body simulations to investigate the collisional origin, determine a realistic velocity field, study the orbital evolution, and constrain the age of the Euphrosyne family. Our spectroscopy survey shows that the family members exhibit a tight taxonomic distribution, suggesting a homogeneous composition of the parent body. Our SPH simulations are consistent with the Euphrosyne family having formed via a reaccumulation process instead of a cratering event. Finally, our N-body simulations indicate that the age of the family is 280 Myr +180/-80 Myr, which is younger than a previous estimate.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical
Authors:
B. Yang,
J. Hanus,
B. Carry,
P. Vernazza,
M. Broz,
F. Vachier,
N. Rambaux,
M. Marsset,
O. Chrenko,
P. Sevecek,
M. Viikinkoski,
E. Jehin,
M. Ferrais,
E. Podlewska Gaca,
A. Drouard,
F. Marchis,
M. Birlan,
Z. Benkhaldoun,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani
, et al. (16 additional authors not shown)
Abstract:
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain…
▽ More
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Impacts into rotating targets: angular momentum draining and efficient formation of synthetic families
Authors:
P. Ševeček,
M. Brož,
M. Jutzi
Abstract:
About 10% of the observed asteroids have rotational periods lower than P = 3 h and they seem to be relatively close to the spin barrier. Yet, the rotation has often been neglected in simulations of asteroid collisions. To determine the effect of rotation, we perform a large number of SPH/N-body impact simulations with rotating targets. We developed a new unified SPH/N-body code with self-gravity,…
▽ More
About 10% of the observed asteroids have rotational periods lower than P = 3 h and they seem to be relatively close to the spin barrier. Yet, the rotation has often been neglected in simulations of asteroid collisions. To determine the effect of rotation, we perform a large number of SPH/N-body impact simulations with rotating targets. We developed a new unified SPH/N-body code with self-gravity, suitable for simulations of both fragmentation phase and gravitational reaccumulation. The code has been verified against previous ones (Benz and Asphaug 1994), but we also tested new features, e.g. rotational stability, tensile stability, etc. Using the new code, we ran simulations with D_pb = 10 km and 100 km monolithic targets and compared synthetic asteroid families created by these impacts with families corresponding to non-rotating targets. The rotation affects mostly cratering events at oblique impact angles. The total mass ejected by these collision can be up to five times larger for rotating targets. We further compute the transfer of the angular momentum and determine conditions under which impacts accelerate or decelerate the target. While individual cratering collisions can cause both acceleration and deceleration, the deceleration prevails on average, collisions thus cause a systematic spin-down of asteroid population.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
SPH/N-body simulations of small (D = 10 km) asteroidal breakups and improved parametric relations for Monte-Carlo collisional models
Authors:
P. Ševeček,
M. Brož,
D. Nesvorný,
B. Enke,
D. Durda,
K. Walsh,
D. C. Richardson
Abstract:
We report on our study of asteroidal breakups, i.e. fragmentations of targets, subsequent gravitational reaccumulation and formation of small asteroid families. We focused on parent bodies with diameters $D_{\rm pb} = 10$ km. Simulations were performed with a smoothed-particle hydrodynamics (SPH) code combined with an efficient N-body integrator. We assumed various projectile sizes, impact velocit…
▽ More
We report on our study of asteroidal breakups, i.e. fragmentations of targets, subsequent gravitational reaccumulation and formation of small asteroid families. We focused on parent bodies with diameters $D_{\rm pb} = 10$ km. Simulations were performed with a smoothed-particle hydrodynamics (SPH) code combined with an efficient N-body integrator. We assumed various projectile sizes, impact velocities and impact angles (125 runs in total). Resulting size-frequency distributions are significantly different from scaled-down simulations with $D_{\rm pb} = 100$ km targets (Durda et al., 2007). We derive new parametric relations describing fragment distributions, suitable for Monte-Carlo collisional models. We also characterize velocity fields and angular distributions of fragments, which can be used as initial conditions for N-body simulations of small asteroid families. Finally, we discuss a number of uncertainties related to SPH simulations.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
Obliquity dependence of the tangential YORP
Authors:
P. Ševeček,
O. Golubov,
D. J. Scheeres,
Yu. N. Krugly
Abstract:
Context. Tangential YORP is a thermophysical effect that can alter the rotation rate of asteroids and is distinct from the "normal" YORP effect, but to date has only been studied for asteroids with zero obliquity. Aims. The tangential YORP force produced by spherical boulders on the surface of an asteroid with an arbitrary obliquity is studied. Methods. A finite element method is used to simulate…
▽ More
Context. Tangential YORP is a thermophysical effect that can alter the rotation rate of asteroids and is distinct from the "normal" YORP effect, but to date has only been studied for asteroids with zero obliquity. Aims. The tangential YORP force produced by spherical boulders on the surface of an asteroid with an arbitrary obliquity is studied. Methods. A finite element method is used to simulate heat conductivity inside a boulder, to find the recoil force experienced by it. Then an ellipsoidal asteroid uniformly covered by such boulders is considered and the torque is numerically integrated over its surface. Results. Tangential YORP is found to operate on non-zero obliquities and decreases by a factor of 2 for increasing obliquity.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
The thermal emission from boulders on (25143) Itokawa and general implications for the YORP effect
Authors:
P. Ševeček,
M. Brož,
D. Čapek,
J. Ďurech
Abstract:
Infrared radiation emitted from an asteroid surface causes a torque that can significantly affect rotational state of the asteroid. The influence of small topographic features on this phenomenon, called the YORP effect, seems to be of utmost importance. In this work, we show that a lateral heat diffusion in boulders of suitable sizes leads to an emergence of a local YORP effect which magnitude is…
▽ More
Infrared radiation emitted from an asteroid surface causes a torque that can significantly affect rotational state of the asteroid. The influence of small topographic features on this phenomenon, called the YORP effect, seems to be of utmost importance. In this work, we show that a lateral heat diffusion in boulders of suitable sizes leads to an emergence of a local YORP effect which magnitude is comparable to the YORP effect due to the global shape. We solve a three-dimensional heat diffusion equation in a boulder and its surroundings by the finite element method, using the FreeFem++ code. The contribution to the total torque is inferred from the computed temperature distribution. Our general approach allows us to compute the torque induced by a realistic irregular boulder. For an idealized boulder, our result is consistent with an existing one-dimensional model. We also estimated (and extrapolated) a size distribution of boulders on (25143) Itokawa from close-up images of its surface. We realized that topographic features on Itokawa can potentially induce a torque corresponding to a rotational acceleration of the order 10^-7 rad day^-2 and can therefore explain the observed phase shift in light curves.
△ Less
Submitted 2 April, 2015;
originally announced April 2015.
