-
Les Houches guide to reusable ML models in LHC analyses
Authors:
Jack Y. Araz,
Andy Buckley,
Gregor Kasieczka,
Jan Kieseler,
Sabine Kraml,
Anders Kvellestad,
Andre Lessa,
Tomasz Procter,
Are Raklev,
Humberto Reyes-Gonzalez,
Krzysztof Rolbiecki,
Sezen Sekmen,
Gokhan Unel
Abstract:
With the increasing usage of machine-learning in high-energy physics analyses, the publication of the trained models in a reusable form has become a crucial question for analysis preservation and reuse. The complexity of these models creates practical issues for both reporting them accurately and for ensuring the stability of their behaviours in different environments and over extended timescales.…
▽ More
With the increasing usage of machine-learning in high-energy physics analyses, the publication of the trained models in a reusable form has become a crucial question for analysis preservation and reuse. The complexity of these models creates practical issues for both reporting them accurately and for ensuring the stability of their behaviours in different environments and over extended timescales. In this note we discuss the current state of affairs, highlighting specific practical issues and focusing on the most promising technical and strategic approaches to ensure trustworthy analysis-preservation. This material originated from discussions in the LHC Reinterpretation Forum and the 2023 PhysTeV workshop at Les Houches.
△ Less
Submitted 10 January, 2024; v1 submitted 22 December, 2023;
originally announced December 2023.
-
Electromagnetic and vacuum tests of the PTAK-RFQ module 0
Authors:
Atacan Kılıçgedik,
Aytül Adıgüzel,
Aslıhan Çağlar,
Emre Çelebi,
Şeyma Esen,
Mithat Kaya,
Ümit Kaya,
Veysi Erkcan Özcan,
Görkem Türemen,
Nafiz Gökhan Ünel,
Fatih Yaman
Abstract:
A new Radio-frequency quadrupole (RFQ), which operates at 800 MHz high frequency and will enable to accelerate of the proton beam efficiently was designed at KAHVELab (Kandilli Detector, Accelerator and Instrumentation Laboratory) at Boğaziçi University in İstanbul, Turkey. The so-called PTAK-RFQ, which consists of two modules with a total length of less than one meter will accelerate protons to 2…
▽ More
A new Radio-frequency quadrupole (RFQ), which operates at 800 MHz high frequency and will enable to accelerate of the proton beam efficiently was designed at KAHVELab (Kandilli Detector, Accelerator and Instrumentation Laboratory) at Boğaziçi University in İstanbul, Turkey. The so-called PTAK-RFQ, which consists of two modules with a total length of less than one meter will accelerate protons to 2 MeV at the Proton Testbeam at the Kandilli campus, known as the PTAK project. The prototype of the first module of the 800 MHz PTAK-RFQ (called the PTAK-RFQ module 0), which captures and bunches the proton beam injected from the ion source was fabricated by a local manufacturer from ordinary copper material. The PTAK-RFQ module 0 was subjected to various tests to ensure that its mechanics, pressure, field distribution, and frequency are operationally adjusted. The facilitating solutions emerging from the detailed testing of the PTAK-RFQ module 0 will ultimately guide all mechanical, vacuum, rf testing, final design, and manufacturing processes of the final PTAK-RFQ. The PTAK-RFQ module 0 was first subjected to vacuum tests and then to detailed vacuum leak tests. Subsequently, low-power rf measurements were performed for tuning of field and frequency. The tuning algorithm developed by CERN was optimized for 16 tuners and 6 test field points to be adjusted to the PTAK-RFQ module 0 to the desired field distribution. The tuning algorithm is based on a response matrix, whose inputs are created by bead-pull measurements of individual tuner movements. The tuning algorithm gives some predictions for corrective tuner movements to achieve desired field distribution. In the framework of all these RF tuning processes, the field distribution was tuned through the tuning algorithm and then the frequency was tuned manually.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Low-energy Ion Beam Diagnostics: An Integrated Solution
Authors:
A. Adıgüzel,
H. Çetinkaya,
Ş. Esen,
D. Halis,
T. B. İlhan,
A. Kılıçgedik,
S. Oğur,
S. Öz,
A. Özbey,
V. E. Özcan,
N. G. Ünel
Abstract:
High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in Istanbul to deploy a four-vane Radio Frequency Quadrupole (RFQ) operating at 800~MHz to accelerate 20~keV protons to 2~MeV. The protons from the microwave discharge io…
▽ More
High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in Istanbul to deploy a four-vane Radio Frequency Quadrupole (RFQ) operating at 800~MHz to accelerate 20~keV protons to 2~MeV. The protons from the microwave discharge ion source are transversely matched to the RFQ via an optimized Low Energy Beam Transport (LEBT) line which also contains an integrated measurement station, called measurement station (MBOX). The MBOX is used to measure the proton beam's current along with pulse length duration, profile as well as the beam emittance upstream of the RFQ. It contains a number of home-built diagnostic tools: a Faraday cup, a scintillator screen and a pepper pot plate (PP). The analysis software is also locally developed and tested for the PP photo analysis. In this note, the design, construction and tests of the integrated measurement station are discussed. The results from various measurements, especially on beam profile and charge, are compared to the simulation predictions.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Second Analysis Ecosystem Workshop Report
Authors:
Mohamed Aly,
Jackson Burzynski,
Bryan Cardwell,
Daniel C. Craik,
Tal van Daalen,
Tomas Dado,
Ayanabha Das,
Antonio Delgado Peris,
Caterina Doglioni,
Peter Elmer,
Engin Eren,
Martin B. Eriksen,
Jonas Eschle,
Giulio Eulisse,
Conor Fitzpatrick,
José Flix Molina,
Alessandra Forti,
Ben Galewsky,
Sean Gasiorowski,
Aman Goel,
Loukas Gouskos,
Enrico Guiraud,
Kanhaiya Gupta,
Stephan Hageboeck,
Allison Reinsvold Hall
, et al. (44 additional authors not shown)
Abstract:
The second workshop on the HEP Analysis Ecosystem took place 23-25 May 2022 at IJCLab in Orsay, to look at progress and continuing challenges in scaling up HEP analysis to meet the needs of HL-LHC and DUNE, as well as the very pressing needs of LHC Run 3 analysis.
The workshop was themed around six particular topics, which were felt to capture key questions, opportunities and challenges. Each to…
▽ More
The second workshop on the HEP Analysis Ecosystem took place 23-25 May 2022 at IJCLab in Orsay, to look at progress and continuing challenges in scaling up HEP analysis to meet the needs of HL-LHC and DUNE, as well as the very pressing needs of LHC Run 3 analysis.
The workshop was themed around six particular topics, which were felt to capture key questions, opportunities and challenges. Each topic arranged a plenary session introduction, often with speakers summarising the state-of-the art and the next steps for analysis. This was then followed by parallel sessions, which were much more discussion focused, and where attendees could grapple with the challenges and propose solutions that could be tried. Where there was significant overlap between topics, a joint discussion between them was arranged.
In the weeks following the workshop the session conveners wrote this document, which is a summary of the main discussions, the key points raised and the conclusions and outcomes. The document was circulated amongst the participants for comments before being finalised here.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Ion source and LEBT of KAHVELab proton beamline
Authors:
A. Adıgüzel,
S. Açıksöz,
A. Çağlar,
H. Çetinkaya,
Ş. Esen,
D. Halis,
A. Hamparsunoğlu,
T. B. İlhan,
A. Kılıçgedik,
O. Koçer,
S. Oğur,
S. Öz,
A. Özbey,
V. E. Özcan,
N. G. Ünel
Abstract:
The KAHVE Laboratory, at Boğaziçi University, Istanbul, Turkey is home to an educational proton linac project. The proton beam will originate from a 20 keV H+ source and will be delivered to a two module Radio Frequency Quadrupole (RFQ) operating at 800 MHz via a low energy beam transport (LEBT) line. Currently, the design phase being over, commissioning and stability tests are ongoing for the pro…
▽ More
The KAHVE Laboratory, at Boğaziçi University, Istanbul, Turkey is home to an educational proton linac project. The proton beam will originate from a 20 keV H+ source and will be delivered to a two module Radio Frequency Quadrupole (RFQ) operating at 800 MHz via a low energy beam transport (LEBT) line. Currently, the design phase being over, commissioning and stability tests are ongoing for the proton beamline which is already produced and installed except the RFQ which is being manufactured. This work summarizes the design, production and test phases of the ion source and LEBT line components.
△ Less
Submitted 28 November, 2022; v1 submitted 31 July, 2022;
originally announced August 2022.
-
Democratizing LHC Data Analysis with ADL/CutLang
Authors:
Sezen Sekmen,
Gokhan Unel,
Harrison B. Prosper,
Aytul Adiguzel,
Burak Sen
Abstract:
Data analysis at the LHC has a very steep learning curve, which erects a formidable barrier between data and anyone who wishes to analyze data, either to study an idea or to simply understand how data analysis is performed. To make analysis more accessible, we designed the so-called Analysis Description Language (ADL), a domain specific language capable of describing the contents of an LHC analysi…
▽ More
Data analysis at the LHC has a very steep learning curve, which erects a formidable barrier between data and anyone who wishes to analyze data, either to study an idea or to simply understand how data analysis is performed. To make analysis more accessible, we designed the so-called Analysis Description Language (ADL), a domain specific language capable of describing the contents of an LHC analysis in a standard and unambiguous way, independent of any computing frameworks. ADL has an English-like highly human-readable syntax and directly employs concepts relevant to HEP. Therefore it eliminates the need to learn complex analysis frameworks written based on general purpose languages such as C++ or Python, and shifts the focus directly to physics. Analyses written in ADL can be run on data using a runtime interpreter called CutLang, without the necessity of programming. ADL and CutLang are designed for use by anyone with an interest in, and/or knowledge of LHC physics, ranging from experimentalists and phenomenologists to non-professional enthusiasts. ADL/CutLang are originally designed for research, but are also equally intended for education and public use. This approach has already been employed to train undergraduate students with no programming experience in LHC analysis in two dedicated schools in Turkey and Vietnam, and is being adapted for use with LHC Open Data. Moreover, work is in progress towards piloting an educational module in particle physics data analysis for high school students and teachers. Here, we introduce ADL and CutLang and present the educational activities based on these practical tools.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
Analysis Description Language: A DSL for HEP Analysis
Authors:
Harrison B. Prosper,
Sezen Sekmen,
Gokhan Unel
Abstract:
We propose to adopt a declarative domain specific language for describing the physics algorithm of a high energy physics (HEP) analysis in a standard and unambiguous way decoupled from analysis software frameworks, and argue that this approach provides an accessible and sustainable environment for analysis design, use and preservation. Prototype of such a language called Analysis Description Langu…
▽ More
We propose to adopt a declarative domain specific language for describing the physics algorithm of a high energy physics (HEP) analysis in a standard and unambiguous way decoupled from analysis software frameworks, and argue that this approach provides an accessible and sustainable environment for analysis design, use and preservation. Prototype of such a language called Analysis Description Language (ADL) and its associated tools are being developed and applied in various HEP physics studies. We present the motivations for using a DSL, design principles of ADL and its runtime interpreter CutLang, along with current physics studies based on this approach. We also outline ideas and prospects for the future. Recent physics studies, hands-on workshops and surveys indicate that ADL is a feasible and effective approach with many advantages and benefits, and offers a direction to which the HEP field should give serious consideration.
△ Less
Submitted 18 March, 2022;
originally announced March 2022.
-
Recent advances in ADL, CutLang and adl2tnm
Authors:
Harrison B. Prosper,
Sezen Sekmen,
Gokhan Unel,
Arpon Paul
Abstract:
This paper presents an overview and features of an Analysis Description Language (ADL) designed for HEP data analysis. ADL is a domain specific, declarative language that describes the physics content of an analysis in a standard and unambiguous way, independent of any computing frameworks. It also describes infrastructures that render ADL executable, namely CutLang, a direct runtime interpreter (…
▽ More
This paper presents an overview and features of an Analysis Description Language (ADL) designed for HEP data analysis. ADL is a domain specific, declarative language that describes the physics content of an analysis in a standard and unambiguous way, independent of any computing frameworks. It also describes infrastructures that render ADL executable, namely CutLang, a direct runtime interpreter (originally also a language), and adl2tnm, a transpiler converting ADL into C++ code. In ADL, analyses are described in human readable plain text files, clearly separating object, variable and event selection definitions in blocks, with a syntax that includes mathematical and logical operations, comparison and optimisation operators, reducers, four-vector algebra and commonly used functions. Recent studies demonstrate that adapting the ADL approach has numerous benefits for the experimental and phenomenological HEP communities. These include facilitating the abstraction, design, optimization, visualization, validation, combination, reproduction, interpretation and overall communication of the analysis contents and long term preservation of the analyses beyond the lifetimes of experiments. Here we also discuss some of the current ADL applications in physics studies and future prospects based on static analysis and differentiable programming.
△ Less
Submitted 28 July, 2021;
originally announced August 2021.
-
DemirciPro's tools for completing the Linac: Ion source and LEBT line
Authors:
Orhan Cakir,
Emre Celebi,
Hakan Cetinkaya,
Hilal Kolenoglu,
Gorkem Turemen,
Zekeriya Uysal,
Gokhan Unel
Abstract:
Demirci RFQ design software has been enlarged to perform other design tasks pertinent to the initial part of a linac. These are the design of an ion source, the design of a low energy beam transmission line including the re alistic design of its magnets and finally the design of a pepper pot emittance meter. This note presents these latest developments together with some examples from a linac bein…
▽ More
Demirci RFQ design software has been enlarged to perform other design tasks pertinent to the initial part of a linac. These are the design of an ion source, the design of a low energy beam transmission line including the re alistic design of its magnets and finally the design of a pepper pot emittance meter. This note presents these latest developments together with some examples from a linac being developed in KahveLab, Turkey.
△ Less
Submitted 9 August, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Beam Dynamics Module of RFQ Design Software Demirci
Authors:
E. Celebi,
G. Turemen,
O. Cakir,
G. Unel
Abstract:
The RFQ design tool DEMIRCI aims to provide fast and accurate simulation of a light ion accelerating cavity and of the ion beam in it. It is a modern tool with a graphical user interface leading to a "point and click" method to help the designer. This article summarises the recent software developments such as the addition of RFQ acceptance match, beam dynamics and 8-term potential coefficient cal…
▽ More
The RFQ design tool DEMIRCI aims to provide fast and accurate simulation of a light ion accelerating cavity and of the ion beam in it. It is a modern tool with a graphical user interface leading to a "point and click" method to help the designer. This article summarises the recent software developments such as the addition of RFQ acceptance match, beam dynamics and 8-term potential coefficient calculations. Its results are compared to other similar software, to discuss the attained compatibility level.
△ Less
Submitted 19 August, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
CutLang V2: towards a unified Analysis Description Language
Authors:
G. Unel,
S. Sekmen,
A. M. Toon,
B. Gokturk,
B. Orgen,
A. Paul,
N. Ravel,
J. Setpal
Abstract:
We will present the latest developments in CutLang, the runtime interpreter of a recently-developed analysis description language (ADL) for collider data analysis. ADL is a domain-specific, declarative language that describes the contents of an analysis in a standard and unambiguous way, independent of any computing framework. In ADL, analyses are written in human-readable plain text files, separa…
▽ More
We will present the latest developments in CutLang, the runtime interpreter of a recently-developed analysis description language (ADL) for collider data analysis. ADL is a domain-specific, declarative language that describes the contents of an analysis in a standard and unambiguous way, independent of any computing framework. In ADL, analyses are written in human-readable plain text files, separating object, variable and event selection definitions in blocks, with a syntax that includes mathematical and logical operations, comparison and optimisation operators, reducers, four-vector algebra and commonly used functions. Adopting ADLs would bring numerous benefits to the LHC experimental and phenomenological communities, ranging from analysis preservation beyond the lifetimes of experiments or analysis software to facilitating the abstraction, design, visualization, validation, combination, reproduction, interpretation and overall communication of the analysis contents. Since their initial release, ADL and CutLang have been used for implementing and running numerous LHC analyses. In this process, the original syntax from CutLang v1 has been modified for better ADL compatibility, and the interpreter has been adapted to work with that syntax, resulting in the current release v2. Furthermore, CutLang has been enhanced to handle object combinatorics, to include tables and weights, to save events at any analysis stage, to benefit from multi-core/multi-CPU hardware among other improvements. In this contribution, these and other enhancements are discussed in details. In addition, real life examples from LHC analyses are presented together with a user manual.
△ Less
Submitted 28 July, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Analysis Description Languages for the LHC
Authors:
Sezen Sekmen,
Philippe Gras,
Lindsey Gray,
Benjamin Krikler,
Jim Pivarski,
Harrison B. Prosper,
Andrea Rizzi,
Gokhan Unel,
Gordon Watts
Abstract:
An analysis description language is a domain specific language capable of describing the contents of an LHC analysis in a standard and unambiguous way, independent of any computing framework. It is designed for use by anyone with an interest in, and knowledge of, LHC physics, i.e., experimentalists, phenomenologists and other enthusiasts. Adopting analysis description languages would bring numerou…
▽ More
An analysis description language is a domain specific language capable of describing the contents of an LHC analysis in a standard and unambiguous way, independent of any computing framework. It is designed for use by anyone with an interest in, and knowledge of, LHC physics, i.e., experimentalists, phenomenologists and other enthusiasts. Adopting analysis description languages would bring numerous benefits for the LHC experimental and phenomenological communities ranging from analysis preservation beyond the lifetimes of experiments or analysis software to facilitating the abstraction, design, visualization, validation, combination, reproduction, interpretation and overall communication of the analysis contents. Here, we introduce the analysis description language concept and summarize the current efforts ongoing to develop such languages and tools to use them in LHC analyses.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
CutLang as an Analysis Description Language for Introducing Students to Analyses in Particle Physics
Authors:
Aytul Adiguzel,
Orhan Cakir,
Umit Kaya,
V. Erkcan Ozcan,
Sertac Ozturk,
Sezen Sekmen,
Ilkay Turk Cakir,
N. Gokhan Unel
Abstract:
The fifth edition of the "Computing Applications in Particle Physics" school was held on 3-7 February 2020, at Istanbul University, Turkey. This particular edition focused on the processing of simulated data from the Large Hadron Collider collisions using an Analysis Description Language and its runtime interpreter called CutLang. 24 undergraduate and 6 graduate students were initiated to collider…
▽ More
The fifth edition of the "Computing Applications in Particle Physics" school was held on 3-7 February 2020, at Istanbul University, Turkey. This particular edition focused on the processing of simulated data from the Large Hadron Collider collisions using an Analysis Description Language and its runtime interpreter called CutLang. 24 undergraduate and 6 graduate students were initiated to collider data analysis during the school. After 3 days of lectures and exercises, the students were grouped into teams of 3 or 4 and each team was assigned an analysis publication from ATLAS or CMS experiments. After 1.5 days of independent study, each team was able to reproduce the assigned analysis using CutLang.
△ Less
Submitted 26 March, 2021; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Down type iso-singlet quarks at the HL-LHC and FCC-hh
Authors:
Arpon Paul,
Sezen Sekmen,
Gokhan Unel
Abstract:
We study the discovery potential of down type iso-singlet quarks, $D$, predicted by the $E_6$ GUT model in the ${pp\rightarrow D\bar{D}\rightarrow ZZd\bar{d} \rightarrow \ell^+\ell^-\ell^+\ell^- d\bar{d}}$ channel at the HL-LHC and FCC-hh colliders. The analysis is performed using a high level analysis description language and its runtime interpreter. The study shows that, using solely this channe…
▽ More
We study the discovery potential of down type iso-singlet quarks, $D$, predicted by the $E_6$ GUT model in the ${pp\rightarrow D\bar{D}\rightarrow ZZd\bar{d} \rightarrow \ell^+\ell^-\ell^+\ell^- d\bar{d}}$ channel at the HL-LHC and FCC-hh colliders. The analysis is performed using a high level analysis description language and its runtime interpreter. The study shows that, using solely this channel, HL-LHC can discover $D$ quarks up to a mass of 710 GeV whereas FCC-hh up to 2430 GeV with data collected in their complete run periods.
△ Less
Submitted 8 May, 2021; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Reinterpretation of LHC Results for New Physics: Status and Recommendations after Run 2
Authors:
Waleed Abdallah,
Shehu AbdusSalam,
Azar Ahmadov,
Amine Ahriche,
Gaël Alguero,
Benjamin C. Allanach,
Jack Y. Araz,
Alexandre Arbey,
Chiara Arina,
Peter Athron,
Emanuele Bagnaschi,
Yang Bai,
Michael J. Baker,
Csaba Balazs,
Daniele Barducci,
Philip Bechtle,
Aoife Bharucha,
Andy Buckley,
Jonathan Butterworth,
Haiying Cai,
Claudio Campagnari,
Cari Cesarotti,
Marcin Chrzaszcz,
Andrea Coccaro,
Eric Conte
, et al. (117 additional authors not shown)
Abstract:
We report on the status of efforts to improve the reinterpretation of searches and measurements at the LHC in terms of models for new physics, in the context of the LHC Reinterpretation Forum. We detail current experimental offerings in direct searches for new particles, measurements, technical implementations and Open Data, and provide a set of recommendations for further improving the presentati…
▽ More
We report on the status of efforts to improve the reinterpretation of searches and measurements at the LHC in terms of models for new physics, in the context of the LHC Reinterpretation Forum. We detail current experimental offerings in direct searches for new particles, measurements, technical implementations and Open Data, and provide a set of recommendations for further improving the presentation of LHC results in order to better enable reinterpretation in the future. We also provide a brief description of existing software reinterpretation frameworks and recent global analyses of new physics that make use of the current data.
△ Less
Submitted 21 July, 2020; v1 submitted 17 March, 2020;
originally announced March 2020.
-
CutLang: a cut-based HEP analysis description language and runtime interpreter
Authors:
Gokhan Unel,
Sezen Sekmen,
Anna Monica Toon
Abstract:
We present CutLang, an analysis description language and runtime interpreter for high energy collider physics data analyses. An analysis description language is a declerative domain specific language that can express all elements of a data analysis in an easy and unambiguous way. A full-fledged human readable analysis description language, incorporating logical and mathematical expressions, would…
▽ More
We present CutLang, an analysis description language and runtime interpreter for high energy collider physics data analyses. An analysis description language is a declerative domain specific language that can express all elements of a data analysis in an easy and unambiguous way. A full-fledged human readable analysis description language, incorporating logical and mathematical expressions, would eliminate many programming difficulties and errors, consequently allowing the scientist to focus on the goal, but not on the tool. In this paper, we discuss the guiding principles and scope of the CutLang language, implementation of the CutLang runtime interpreter and the CutLang framework, and demonstrate an example of top pair reconstruction.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Stream Reasoning on Expressive Logics
Authors:
Gulay Unel
Abstract:
Data streams occur widely in various real world applications. The research on streaming data mainly focuses on the data management, query evaluation and optimization on these data, however the work on reasoning procedures for streaming knowledge bases on both the assertional and terminological levels is very limited. Typically reasoning services on large knowledge bases are very expensive, and nee…
▽ More
Data streams occur widely in various real world applications. The research on streaming data mainly focuses on the data management, query evaluation and optimization on these data, however the work on reasoning procedures for streaming knowledge bases on both the assertional and terminological levels is very limited. Typically reasoning services on large knowledge bases are very expensive, and need to be applied continuously when the data is received as a stream. Hence new techniques for optimizing this continuous process is needed for develo** efficient reasoners on streaming data. In this paper, we survey the related research on reasoning on expressive logics that can be applied to this setting, and point to further research directions in this area.
△ Less
Submitted 15 August, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Recent Developments in Demirci for RFQ Design
Authors:
Emre Çelebi,
Orhan Çakır,
Görkem Türemen,
Gökhan Ünel
Abstract:
DEMIRCI software aims to aid RFQ design efforts by making the process easy, fast and accurate. In this report, DEMIRCI 8-term potential results are compared with the results provided by other commercially available simulation software. Computed electric fields are compared to the results from simulations of a recently produced 352 MHz RFQ. Recent developments like the inclusion of space charge eff…
▽ More
DEMIRCI software aims to aid RFQ design efforts by making the process easy, fast and accurate. In this report, DEMIRCI 8-term potential results are compared with the results provided by other commercially available simulation software. Computed electric fields are compared to the results from simulations of a recently produced 352 MHz RFQ. Recent developments like the inclusion of space charge effects in DEMIRCI beam dynamics are also discussed. Moreover, further terms are added to 8-term potential to simulate possible vane production errors. The FEM solver was also improved to mesh the cells with errors.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
CutLang: A Particle Physics Analysis Description Language and Runtime Interpreter
Authors:
Sezen Sekmen,
Gokhan Unel
Abstract:
This note introduces CutLang, a domain specific language that aims to provide a clear, human readable way to define analyses in high energy particle physics (HEP) along with an interpretation framework of that language. A proof of principle (PoP) implementation of the CutLang interpreter, achieved using C++ as a layer over the CERN data analysis framework ROOT, is presently available. This PoP imp…
▽ More
This note introduces CutLang, a domain specific language that aims to provide a clear, human readable way to define analyses in high energy particle physics (HEP) along with an interpretation framework of that language. A proof of principle (PoP) implementation of the CutLang interpreter, achieved using C++ as a layer over the CERN data analysis framework ROOT, is presently available. This PoP implementation permits writing HEP analyses in an unobfuscated manner, as a set of commands in human readable text files, which are interpreted by the framework at runtime. We describe the main features of CutLang and illustrate its usage with two analysis examples. Initial experience with CutLang has shown that a just-in-time interpretation of a human readable HEP specific language is a practical alternative to analysis writing using compiled languages such as C++.
△ Less
Submitted 24 July, 2018; v1 submitted 17 January, 2018;
originally announced January 2018.
-
A simple Cherenkov detector for educational purposes
Authors:
Sertac Ozturk,
Gokhan N. Unel
Abstract:
Cherenkov detectors are in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small Cherenkov detector with limited resources, which could be used to observe the cosmic rays. The Cherenkov light obtained in this particular detector is read with a photo multiplier tube and its signal is observed on an oscilloscope. The detector…
▽ More
Cherenkov detectors are in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small Cherenkov detector with limited resources, which could be used to observe the cosmic rays. The Cherenkov light obtained in this particular detector is read with a photo multiplier tube and its signal is observed on an oscilloscope. The detector construction can be achieved by relatively simple means and can be used as an educational tool.
△ Less
Submitted 27 August, 2017;
originally announced August 2017.
-
"Higgs" Factory at the Greek-Turkish Border
Authors:
Serkant Ali Çetin,
Evangelos N. Gazis,
Bora Işildak,
Fatih Ömer İlday,
Konstantinos Kordas,
Chariclia Petridou,
Yannis K. Semertzidis,
Saleh Sultansoy,
Gökhan Ünel,
Konstantin Zioutas
Abstract:
We would like to propose the construction of the photon collider based "Higgs factory" in the coming years at the Greek-Turkish border, starting from its test facility with a high energy photon beam. This proposal was among the contributions to the Open Symposium of the ESPG'12.
We would like to propose the construction of the photon collider based "Higgs factory" in the coming years at the Greek-Turkish border, starting from its test facility with a high energy photon beam. This proposal was among the contributions to the Open Symposium of the ESPG'12.
△ Less
Submitted 28 June, 2017;
originally announced June 2017.
-
Recent Developments In DEMIRCI, The RFQ Design Software
Authors:
Emre Çelebi,
Orhan Çakır,
Görkem Türemen,
Betül Yasatekin,
Gökhan Ünel
Abstract:
The RFQ design tool DEMIRCI aims to provide fast and accurate simulation of a light ion accelerating cavity and of the ion beam in it. It is a modern tool with a graphical user interface leading to a "point and click" method to help the designer. This article summarizes the recent developments of DEMIRCI software such as the addition of beam dynamics and 8-term potential coefficient calculations.…
▽ More
The RFQ design tool DEMIRCI aims to provide fast and accurate simulation of a light ion accelerating cavity and of the ion beam in it. It is a modern tool with a graphical user interface leading to a "point and click" method to help the designer. This article summarizes the recent developments of DEMIRCI software such as the addition of beam dynamics and 8-term potential coefficient calculations. Its results are compared to other software available on the market, to show the attained compatibility level. Finally the future prospects are discussed.
△ Less
Submitted 20 May, 2017;
originally announced May 2017.
-
Pulsed Beam Tests at the SANAEM RFQ Beamline
Authors:
G. Turemen,
Y. Akgun,
A. Alacakir,
I. Kilic,
B. Yasatekin,
E. Ergenlik,
S. Ogur,
E. Sunar,
V. Yildiz,
F. Ahiska,
E. Cicek,
G. Unel
Abstract:
A proton beamline consisting of an inductively coupled plasma (ICP) source, two solenoid magnets, two steerer magnets and a radio frequency quadrupole (RFQ) is developed at the Turkish Atomic Energy Authority's (TAEA) Saraykoy Nuclear Research and Training Center (SNRTC-SANAEM) in Ankara. In Q4 of 2016, the RFQ was installed in the beamline. The high power tests of the RF power supply and the RF t…
▽ More
A proton beamline consisting of an inductively coupled plasma (ICP) source, two solenoid magnets, two steerer magnets and a radio frequency quadrupole (RFQ) is developed at the Turkish Atomic Energy Authority's (TAEA) Saraykoy Nuclear Research and Training Center (SNRTC-SANAEM) in Ankara. In Q4 of 2016, the RFQ was installed in the beamline. The high power tests of the RF power supply and the RF transmission line were done successfully. The high power RF conditioning of the RFQ was performed recently. The 13.56 MHz ICP source was tested in two different conditions, CW and pulsed. The characterization of the proton beam was done with ACCTs, Faraday cups and a pepper-pot emittance meter. Beam transverse emittance was measured in between the two solenoids of the LEBT. The measured beam is then reconstructed at the entrance of the RFQ by using computer simulations to determine the optimum solenoid currents for acceptance matching of the beam. This paper will introduce the pulsed beam test results at the SANAEM RFQ beamline. In addition, the high power RF conditioning of the RFQ will be discussed.
△ Less
Submitted 21 June, 2017; v1 submitted 18 May, 2017;
originally announced May 2017.
-
Compact Measurement Station for Low Energy Proton Beams
Authors:
H. Yildiz,
A. Ozbey,
S. Oz,
B. Yasatekin,
G. Turemen,
S. Ogur,
E. Sunar,
Y. A. Aydin,
V. A. Dimov,
G. Unel,
A. Alacakir
Abstract:
A compact, remote controlled, cost efficient diagnostic station has been developed to measure the charge, the profile and the emittance for low energy proton beams. It has been installed and tested in the proton beam line of the Project Prometheus at SANAEM of the Turkish Atomic Energy Authority.
A compact, remote controlled, cost efficient diagnostic station has been developed to measure the charge, the profile and the emittance for low energy proton beams. It has been installed and tested in the proton beam line of the Project Prometheus at SANAEM of the Turkish Atomic Energy Authority.
△ Less
Submitted 19 December, 2016; v1 submitted 27 July, 2016;
originally announced July 2016.
-
Les Houches 2015: Physics at TeV colliders - new physics working group report
Authors:
G. Brooijmans,
C. Delaunay,
A. Delgado,
C. Englert,
A. Falkowski,
B. Fuks,
S. Nikitenko,
S. Sekmen,
D. Barducci,
J. Bernon,
A. Bharucha,
J. Brehmer,
I. Brivio,
A. Buckley,
D. Burns,
G. Cacciapaglia,
H. Cai,
A. Carmona,
A. Carvalho,
G. Chalons,
Y. Chen,
R. S. Chivukula,
E. Conte,
A. Deandrea,
N. De Filippis
, et al. (56 additional authors not shown)
Abstract:
We present the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 1-19 June, 2015). Our report includes new physics studies connected with the Higgs boson and its properties, direct search strategies, reinterpretation of the LHC results in the building of viable models and new computational tool developments. Important signatures for sea…
▽ More
We present the activities of the 'New Physics' working group for the 'Physics at TeV Colliders' workshop (Les Houches, France, 1-19 June, 2015). Our report includes new physics studies connected with the Higgs boson and its properties, direct search strategies, reinterpretation of the LHC results in the building of viable models and new computational tool developments. Important signatures for searches for natural new physics at the LHC and new assessments of the interplay between direct dark matter searches and the LHC are also considered.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
Manufacturing and the LLRF Tests of the SANAEM RFQ
Authors:
G. Turemen,
A. Alacakir,
Y. Akgun,
S. Bolukdemir,
I. Kilic,
B. Yasatekin,
H. Yildiz,
G. Unel
Abstract:
The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the…
▽ More
The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the acceptance tests of the vanes and their assembly. Production and assembly errors were found acceptable for this cavity, the very first one developed in Turkey. The aluminum vanes were copper coated by electroplating. The coated vanes were bolted and bonded with eight screws, eight pins and two different adhesives. A silver paste was used for RF sealing and a low vapor pressure epoxy was used for vacuum isolation. First LLRF tests of the RFQ were performed using the phase shift method with a bead-pull setup, a VNA, an N-type RF coupler and a pick-up loop. Cavity quality factor was measured with 3dB method for different RF sealing stages. This study summarizes the machining, assembling and the first LLRF tests of the SANAEM RFQ.
△ Less
Submitted 23 June, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Monitoring Akkuyu Nuclear Reactor Using Antineutrino Flux Measurement
Authors:
Sertac Ozturk,
Aytul Adiguzel,
V. Erkcan Ozcan,
Gokhan Unel
Abstract:
We present a simulation-based study for monitoring Akkuyu Nuclear Power Plant's activity using antineutrino flux originating from the reactor core. A water Cherenkov detector has been designed and optimization studies have been performed using Geant4 simulation toolkit. A first study for the design of a monitoring detector facility for Akkuyu Nuclear Power Plant is discussed in this paper.
We present a simulation-based study for monitoring Akkuyu Nuclear Power Plant's activity using antineutrino flux originating from the reactor core. A water Cherenkov detector has been designed and optimization studies have been performed using Geant4 simulation toolkit. A first study for the design of a monitoring detector facility for Akkuyu Nuclear Power Plant is discussed in this paper.
△ Less
Submitted 26 April, 2016; v1 submitted 15 February, 2016;
originally announced February 2016.
-
DEMIRCI: An RFQ Design Software
Authors:
B. Yasatekin,
G. Turemen,
E. Celebi,
G. Unel,
O. Cakir
Abstract:
The development and production of radio frequency quadrupoles, which are used for accelerating low-energy ions to high energies, continues since 1970s. The development of RFQ design software packages, which can provide ease of use with a graphical interface, can visualize the behavior of the ion beam inside the RFQ, and can run on both Unix and Windows platforms, has become inevitable due to incre…
▽ More
The development and production of radio frequency quadrupoles, which are used for accelerating low-energy ions to high energies, continues since 1970s. The development of RFQ design software packages, which can provide ease of use with a graphical interface, can visualize the behavior of the ion beam inside the RFQ, and can run on both Unix and Windows platforms, has become inevitable due to increasing interest around the world. In this context, a new RFQ design software package, DEMIRCI, has been under development. To meet the user expectations, a number of new features have been recently added to DEMIRCI. Apart from being usable via both graphical interface and command line, DEMIRCI has been enriched with beam dynamics calculations. This new module gives users the possibility to define and track an input beam and to monitor its behavior along the RFQ. Additionally, the Windows OS has been added to the list of supported platforms. Finally, the addition of more realistic 8 term potential results has been ongoing. This note will summarize the latest developments and results from DEMIRCI RFQ design software.
△ Less
Submitted 21 March, 2016; v1 submitted 3 November, 2015;
originally announced November 2015.
-
Development of a Hybrid Power Supply and RF Transmission Line for SANAEM RFQ Accelerator
Authors:
S. Ogur,
G. Turemen,
G. Unel,
A. Alacakir
Abstract:
SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ to be powered by two stage PSU. The first stage is a custom-built solid state amplifier providing 6 kW at 352.2 MHz operating frequency. The second stage, empl…
▽ More
SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ to be powered by two stage PSU. The first stage is a custom-built solid state amplifier providing 6 kW at 352.2 MHz operating frequency. The second stage, employing TH 595 tetrodes from Thales, will amplify this input to 160 kW in a short pulsed mode. The power transfer to the RFQ will be achieved by the means of a number of WR2300 full and half height waveguides, 3 1/8" rigid coaxial cables, joined by appropriate adapters and converters and by a custom design circulator. This paper summarizes the experience acquired during the design and the production of these components.
△ Less
Submitted 8 October, 2015; v1 submitted 29 May, 2015;
originally announced May 2015.
-
Current Status of the SANAEM RFQ Accelerator Beamline
Authors:
G. Turemen,
B. Yasatekin,
S. Ogur,
V. Yildiz,
O. Mete,
S. Oz,
A. Ozbey,
H. Yildiz,
F. Yaman,
Y. Akgun,
A. Alacakir,
S. Bolukdemir,
A. Bozbey,
A. Sahin,
G. Unel,
S. Erhan
Abstract:
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability…
▽ More
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability tests are ongoing for the Inductively Coupled Plasma ion source. The measured magnetic field maps of the Low Energy Beam Transport solenoids are being used for matching various beam configurations of the ion source to the RFQ by computer simulations. The installation of the low energy diagnostics box was completed in Q1 of 2015. The production of the RFQ cavity was started with aluminum 7075-T6 which will be subsequently coated by Copper to reduce the RF (Ohmic) losses. On the RF side, the development of the hybrid power supply based on solid state and tetrode amplifiers continues. All RF transmission components have already produced with the exception of the circulator and the power coupling antenna which are in the manufacturing and design phases, respectively. The acceptance tests of the produced RF components are ongoing. This work summarizes the design, production and test phases of the above-mentioned SPP proton beamline components.
△ Less
Submitted 30 September, 2015; v1 submitted 28 April, 2015;
originally announced April 2015.
-
Design and Manufacture of the RF Power Supply and RF Transmission Line for SANAEM Project Prometheus
Authors:
G. Turemen,
S. Ogur,
F. Ahiska,
B. Yasatekin,
E. Cicek,
A. Ozbey,
I. Kilic,
G. Unel,
A. Alacakir
Abstract:
A 1-5 MeV proton beamline is being built by the Turkish Atomic Energy Authority in collaboration with a number of graduate students from different universities. The primary goal of the project, is to acquire the design ability and manufacturing capability of all the components locally. SPP will be an accelerator and beam diagnostics test facility and it will also serve the detector development com…
▽ More
A 1-5 MeV proton beamline is being built by the Turkish Atomic Energy Authority in collaboration with a number of graduate students from different universities. The primary goal of the project, is to acquire the design ability and manufacturing capability of all the components locally. SPP will be an accelerator and beam diagnostics test facility and it will also serve the detector development community with its low beam current. This paper discusses the design and construction of the RF power supply and the RF transmission line components such as its waveguide converters and its circulator. Additionally low and high power RF test results are presented to compare the performances of the locally produced components to the commercially available ones.
△ Less
Submitted 13 July, 2017; v1 submitted 7 April, 2015;
originally announced April 2015.
-
Design Studies with DEMIRCI for SPP RFQ
Authors:
B. Yasatekin,
G. Turemen,
A. Alacakir,
G. Unel
Abstract:
To design a Radio Frequency Quadrupole (RFQ) is a onerous job which requires a good understanding of all the main parameters and the relevant calculations. Up to the present there are only a few software packages performing this task in a reliable way. These legacy software, though proven in time, could benefit from the modern software development tools like Object Oriented (OO) programming. In th…
▽ More
To design a Radio Frequency Quadrupole (RFQ) is a onerous job which requires a good understanding of all the main parameters and the relevant calculations. Up to the present there are only a few software packages performing this task in a reliable way. These legacy software, though proven in time, could benefit from the modern software development tools like Object Oriented (OO) programming. In this note, a new RFQ design software, DEMIRCI is introduced. It is written entirely from scratch using C++ and based on CERN's OO ROOT library. It has a friendly graphical user interface and also a command line interface for batch calculations. It can also interact by file exchange with similar software in the field. After presenting the generic properties of DEMIRCI, its compatibility with similar software packages is discussed based on the results from the reference design parameters of SPP (SNRTC Project Prometheus), a demonstration accelerator at Ankara, Turkey.
△ Less
Submitted 8 July, 2015; v1 submitted 2 September, 2014;
originally announced September 2014.
-
A wire chamber for educational purposes
Authors:
Saime Gurbuz,
Gokhan Unel,
Samim Erhan
Abstract:
Gaseous detectors with sense wires are still in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small wire chamber with limited resources, which could be used both as an educational tool and also as a tracker in small experiments. The particular detector type selected for this work is the so called "Delay Wire Chamber": it h…
▽ More
Gaseous detectors with sense wires are still in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small wire chamber with limited resources, which could be used both as an educational tool and also as a tracker in small experiments. The particular detector type selected for this work is the so called "Delay Wire Chamber": it has only two output channels per plane and can be made fully gas tight for educational operations. The design can be made with free software tools, and the construction can be achieved by relatively simple means.
△ Less
Submitted 1 September, 2014;
originally announced September 2014.
-
Status of the SPP RFQ project
Authors:
G. Turemen,
B. Yasatekin,
H. Yildiz,
A. Alacakir,
G. Unel
Abstract:
The SPP project at TAEK will use a 352.2 MHz 4-vane Radio Frequency Quadrupole (RFQ) to accelerate H+ ions from 20 keV to 1.5 MeV. With the design already complete, the project is at the test production phase. To this effect, a so called "cold model" of 50 cm length has been produced to validate the design approach, to perform the low power RF tests and to evaluate possible production errors. This…
▽ More
The SPP project at TAEK will use a 352.2 MHz 4-vane Radio Frequency Quadrupole (RFQ) to accelerate H+ ions from 20 keV to 1.5 MeV. With the design already complete, the project is at the test production phase. To this effect, a so called "cold model" of 50 cm length has been produced to validate the design approach, to perform the low power RF tests and to evaluate possible production errors. This study will report on the current status of the low energy beam transport line (LEBT) and RFQ cavity of the SPP project. It will also discuss the design and manufacturing of the RF power supply and its transmission line. In addition, the test results from some of the LEBT components will be shown and the final RFQ design will be shared.
△ Less
Submitted 28 April, 2015; v1 submitted 27 August, 2014;
originally announced August 2014.
-
SPP Beamline Design and Beam Dynamics
Authors:
G. Turemen,
Z. Sali,
B. Yasatekin,
V. Yildiz,
M. Celik,
A. Alacakir,
G. Unel,
O. Mete
Abstract:
The Radio Frequency Quadrupole of SANAEM Project Prometheus will be a demonstration and educational machine which will accelerate protons from 20 keV to 1.5 MeV. The project is funded by Turkish Atomic Energy Authority and it will be located at Saraykoy Nuclear Research and Training Center in Ankara. The SPP beamline consists of a multi-cusp H+ ion source, a Low Energy Beam Transport line and a fo…
▽ More
The Radio Frequency Quadrupole of SANAEM Project Prometheus will be a demonstration and educational machine which will accelerate protons from 20 keV to 1.5 MeV. The project is funded by Turkish Atomic Energy Authority and it will be located at Saraykoy Nuclear Research and Training Center in Ankara. The SPP beamline consists of a multi-cusp H+ ion source, a Low Energy Beam Transport line and a four-vane RFQ operating at 352.2 MHz. The design studies for the multi-cusp ion source (RF or DC) were performed with IBSimu and SIMION software packages. The source has already been produced and currently undergoes extensive testing. There is also a preliminary design for the solenoid based LEBT, POISSON and PATH were used in parallel for the preliminary design. Two solenoid magnets are produced following this design. The RFQ design was made using LIDOS.RFQ.Designer and it was crosschecked with a home-grown software package, DEMIRCI. The initial beam dynamics studies have been performed with both LIDOS and TOUTATIS. This paper discusses the design of the SPP beamline focusing on the RFQ beam dynamics.
△ Less
Submitted 28 April, 2015; v1 submitted 11 June, 2014;
originally announced June 2014.
-
A Graphical Approach to Radio Frequency Quadrupole Design
Authors:
G. Turemen,
G. Unel,
B. Yasatekin
Abstract:
The design of a radio frequency quadrupole, an important section of all ion accelerators, and the calculation of its beam dynamics properties can be achieved using the existing computational tools. These programs, originally designed in 1980s, show effects of aging in their user interfaces and in their output. The authors believe there is room for improvement in both design techniques using a grap…
▽ More
The design of a radio frequency quadrupole, an important section of all ion accelerators, and the calculation of its beam dynamics properties can be achieved using the existing computational tools. These programs, originally designed in 1980s, show effects of aging in their user interfaces and in their output. The authors believe there is room for improvement in both design techniques using a graphical approach and in the amount of analytical calculations before going into CPU burning finite element analysis techniques. Additionally an emphasis on the graphical method of controlling the evolution of the relevant parameters using the drag-to-change paradigm is bound to be beneficial to the designer. A computer code, named DEMIRCI, has been written in C++ to demonstrate these ideas. This tool has been used in the design of Turkish Atomic Energy Authority (TAEK)'s 1.5 MeV proton beamline at Saraykoy Nuclear Research and Training Center (SANAEM). DEMIRCI starts with a simple analytical model, calculates the RFQ behavior and produces 3D design files that can be fed to a milling machine. The paper discusses the experience gained during design process of SANAEM Project Prometheus (SPP) RFQ and underlines some of DEMIRCI's capabilities.
△ Less
Submitted 4 May, 2015; v1 submitted 9 January, 2014;
originally announced January 2014.
-
Project PROMETHEUS: Design and Construction of a Radio Frequency Quadrupole at TAEK
Authors:
G. Turemen,
B. Yasatekin,
O. Mete,
M. Celik,
Z. Sali,
Y. Akgun,
A. Alacakir,
S. Bolukdemir,
E. Durukan,
H. Karadeniz,
E. Recepoglu,
E. Cavlan,
G. Unel,
S. Erhan
Abstract:
The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 2…
▽ More
The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 20 keV, 1 mA H+ beam. Simulation results for ion source, transmission and beam dynamics are presented together with analytical studies performed with newly developed RFQ design code DEMIRCI. Simulation results shows that a beam transmission 99% could be achieved at 1.7 m downstream reaching an energy of 1.5 MeV. As the first phase an Aluminum RFQ prototype, the so-called cold model, will be built for low power RF characterization. In this contribution the status of the project, design considerations, simulation results, the various diagnostics techniques and RFQ manufacturing issues are discussed.
△ Less
Submitted 28 April, 2015; v1 submitted 2 October, 2013;
originally announced October 2013.
-
Why QCD Explorer stage of the LHeC should have high(est) priority
Authors:
S. A. Çetin,
S. Sultansoy,
G. Ünel
Abstract:
The QCD Explorer will give opportunity to enlighten the origin of the 98.5% portion of the visible universe's mass, clarify the nature of the strong interactions from parton to nuclear level and provide precission pdf's for the LHC. Especially the γ-nucleus option seems to be very promising for QCD studies.
The QCD Explorer will give opportunity to enlighten the origin of the 98.5% portion of the visible universe's mass, clarify the nature of the strong interactions from parton to nuclear level and provide precission pdf's for the LHC. Especially the γ-nucleus option seems to be very promising for QCD studies.
△ Less
Submitted 23 May, 2013;
originally announced May 2013.
-
On the Relation of the LHeC and the LHC
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
P. Adzic,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
B. Allanach,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal
, et al. (184 additional authors not shown)
Abstract:
The present note relies on the recently published conceptual design report of the LHeC and extends the first contribution to the European strategy debate in emphasising the role of the LHeC to complement and complete the high luminosity LHC programme. The brief discussion therefore focuses on the importance of high precision PDF and $α_s$ determinations for the physics beyond the Standard Model (G…
▽ More
The present note relies on the recently published conceptual design report of the LHeC and extends the first contribution to the European strategy debate in emphasising the role of the LHeC to complement and complete the high luminosity LHC programme. The brief discussion therefore focuses on the importance of high precision PDF and $α_s$ determinations for the physics beyond the Standard Model (GUTs, SUSY, Higgs). Emphasis is also given to the importance of high parton density phenomena in nuclei and their relevance to the heavy ion physics programme at the LHC.
△ Less
Submitted 9 January, 2013; v1 submitted 21 November, 2012;
originally announced November 2012.
-
Probing small x(g) region with the LHeC based gamma-p colliders
Authors:
U. Kaya,
S. Sultansoy,
G. Unel
Abstract:
Potential of the LHeC for probing small x(g) region via c\bar{c} and b\bar{b} production have been investigated. Obtained results clearly show the advantage of gamma-p collider option. Measurement of x(g) down to 3\times10^{-6} seems to be reachable which is two order smaller than HERA coverage.
Potential of the LHeC for probing small x(g) region via c\bar{c} and b\bar{b} production have been investigated. Obtained results clearly show the advantage of gamma-p collider option. Measurement of x(g) down to 3\times10^{-6} seems to be reachable which is two order smaller than HERA coverage.
△ Less
Submitted 17 February, 2014; v1 submitted 21 November, 2012;
originally announced November 2012.
-
A Large Hadron Electron Collider at CERN
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
P. Adzic,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
B. Allanach,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal
, et al. (184 additional authors not shown)
Abstract:
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of s…
▽ More
This document provides a brief overview of the recently published report on the design of the Large Hadron Electron Collider (LHeC), which comprises its physics programme, accelerator physics, technology and main detector concepts. The LHeC exploits and develops challenging, though principally existing, accelerator and detector technologies. This summary is complemented by brief illustrations of some of the highlights of the physics programme, which relies on a vastly extended kinematic range, luminosity and unprecedented precision in deep inelastic scattering. Illustrations are provided regarding high precision QCD, new physics (Higgs, SUSY) and electron-ion physics. The LHeC is designed to run synchronously with the LHC in the twenties and to achieve an integrated luminosity of O(100) fb$^{-1}$. It will become the cleanest high resolution microscope of mankind and will substantially extend as well as complement the investigation of the physics of the TeV energy scale, which has been enabled by the LHC.
△ Less
Submitted 9 January, 2013; v1 submitted 20 November, 2012;
originally announced November 2012.
-
Comparison of Cut-Based and Matrix Element Method Results for Beyond Standard Model Quarks
Authors:
Erdogan Akyazi,
Gokhan Unel,
Metin Yilmaz
Abstract:
In this work, two different methods for extracting the mass of a new quark from the (pseudo) data are compared: the classical cut-based method and the matrix element method. As a concrete example a fourth family up type quark is searched in p-p collisions of 7 TeV center of mass energy. We have shown that even with very small number of events, Matrix Element Method gives better estimations for the…
▽ More
In this work, two different methods for extracting the mass of a new quark from the (pseudo) data are compared: the classical cut-based method and the matrix element method. As a concrete example a fourth family up type quark is searched in p-p collisions of 7 TeV center of mass energy. We have shown that even with very small number of events, Matrix Element Method gives better estimations for the mass value and its error, especially for event samples in which Signal to Background ratio is greater than 0.2.
△ Less
Submitted 28 May, 2013; v1 submitted 29 June, 2012;
originally announced June 2012.
-
A Large Hadron Electron Collider at CERN: Report on the Physics and Design Concepts for Machine and Detector
Authors:
J. L. Abelleira Fernandez,
C. Adolphsen,
A. N. Akay,
H. Aksakal,
J. L. Albacete,
S. Alekhin,
P. Allport,
V. Andreev,
R. B. Appleby,
E. Arikan,
N. Armesto,
G. Azuelos,
M. Bai,
D. Barber,
J. Bartels,
O. Behnke,
J. Behr,
A. S. Belyaev,
I. Ben-Zvi,
N. Bernard,
S. Bertolucci,
S. Bettoni,
S. Biswal,
J. Blümlein,
H. Böttcher
, et al. (168 additional authors not shown)
Abstract:
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared,…
▽ More
The physics programme and the design are described of a new collider for particle and nuclear physics, the Large Hadron Electron Collider (LHeC), in which a newly built electron beam of 60 GeV, up to possibly 140 GeV, energy collides with the intense hadron beams of the LHC. Compared to HERA, the kinematic range covered is extended by a factor of twenty in the negative four-momentum squared, $Q^2$, and in the inverse Bjorken $x$, while with the design luminosity of $10^{33}$ cm$^{-2}$s$^{-1}$ the LHeC is projected to exceed the integrated HERA luminosity by two orders of magnitude. The physics programme is devoted to an exploration of the energy frontier, complementing the LHC and its discovery potential for physics beyond the Standard Model with high precision deep inelastic scattering measurements. These are designed to investigate a variety of fundamental questions in strong and electroweak interactions. The physics programme also includes electron-deuteron and electron-ion scattering in a $(Q^2, 1/x)$ range extended by four orders of magnitude as compared to previous lepton-nucleus DIS experiments for novel investigations of neutron's and nuclear structure, the initial conditions of Quark-Gluon Plasma formation and further quantum chromodynamic phenomena. The LHeC may be realised either as a ring-ring or as a linac-ring collider. Optics and beam dynamics studies are presented for both versions, along with technical design considerations on the interaction region, magnets and further components, together with a design study for a high acceptance detector. Civil engineering and installation studies are presented for the accelerator and the detector. The LHeC can be built within a decade and thus be operated while the LHC runs in its high-luminosity phase. It thus represents a major opportunity for progress in particle physics exploiting the investment made in the LHC.
△ Less
Submitted 7 September, 2012; v1 submitted 13 June, 2012;
originally announced June 2012.
-
Oblique Parameters and Extra Generations via OPUCEM
Authors:
Ece Aşılar,
Esin Çavlan,
Oktay Doğangün,
Sinan Kefeli,
Erkcan Özcan,
Mehmet Şahin,
Gökhan Ünel
Abstract:
Recent improvements to OPUCEM, the tool for calculation of the contributions of various models to oblique parameters, are presented. OPUCEM is used to calculate the available parameter space for the four family Standard Model given the current electroweak precision data. It is shown that even with the restrictions on Higgs boson and new quark masses presented in the 2011 autumn conferences, there…
▽ More
Recent improvements to OPUCEM, the tool for calculation of the contributions of various models to oblique parameters, are presented. OPUCEM is used to calculate the available parameter space for the four family Standard Model given the current electroweak precision data. It is shown that even with the restrictions on Higgs boson and new quark masses presented in the 2011 autumn conferences, there is still enough space to allow a fourth generation with Dirac type neutrinos. For Majorana type neutrinos, the allowed region is even larger. The electroweak precision data also favors non-zero mixing between light and fourth generations, thus effectively reducing current experimental limits. Additionally, calculations with OPUCEM show that even 5th and 6th generations are compatible with the existing electroweak precision data, with a probability comparable to or higher than the Standard Model with 3 generations.
△ Less
Submitted 24 March, 2012; v1 submitted 2 December, 2011;
originally announced December 2011.
-
Impact of the relatively light fourth family neutrino on the Higgs boson search
Authors:
S. A. Cetin,
T. Cuhadar-Donszelmann,
M. Sahin,
S. Sultansoy,
G. Unel
Abstract:
The existence of a fourth fermion generation has mostly been considered as a source of enhanced Higgs signals with respect to the 3 family Standard Model predictions. However, a fourth Standard Model family neutrino could cause the opposite situation. It is shown that relatively light fourth family neutrino (2m_(nu_(4))<m_(H)) could drastically change the interpretation of the search results for t…
▽ More
The existence of a fourth fermion generation has mostly been considered as a source of enhanced Higgs signals with respect to the 3 family Standard Model predictions. However, a fourth Standard Model family neutrino could cause the opposite situation. It is shown that relatively light fourth family neutrino (2m_(nu_(4))<m_(H)) could drastically change the interpretation of the search results for the Higgs boson, especially if m_(H)<170 GeV.
△ Less
Submitted 28 November, 2011; v1 submitted 19 August, 2011;
originally announced August 2011.
-
Comment on "Three Extra Mirror or Sequential Families: Case for a Heavy Higgs Boson and Inert Doublet"
Authors:
M. Sahin,
S. Sultansoy,
G. Unel
Abstract:
In a recent Letter Martinez et al.2011 have argued that the existence of extra three families is still perfectly in accord with the standard model (SM), as long as an additional Higgs doublet is also present. Here we claim that the mentioned accordance can be obtained with less reliance on BSM physics like additional Higgs doublets, but benefiting from Majorana neutrinos is sufficient.
In a recent Letter Martinez et al.2011 have argued that the existence of extra three families is still perfectly in accord with the standard model (SM), as long as an additional Higgs doublet is also present. Here we claim that the mentioned accordance can be obtained with less reliance on BSM physics like additional Higgs doublets, but benefiting from Majorana neutrinos is sufficient.
△ Less
Submitted 8 December, 2011; v1 submitted 15 August, 2011;
originally announced August 2011.
-
A Preonic Model with Colour-Spin Symmetry
Authors:
Oktay Doğangün,
Saleh Sultansoy,
Gökhan Ünel
Abstract:
We have constructed a preonic model starting from a coloured fermionic preon and by postulating a new symmetry, MUSY. This new symmetry is defined via the MU number involving colour, charge and spin properties of the preons. We show that all the known fields of the Standard Model (SM) can be constructed using the fermionic preon and 6 preonic scalars, its MUSY partners. As an example, we present w…
▽ More
We have constructed a preonic model starting from a coloured fermionic preon and by postulating a new symmetry, MUSY. This new symmetry is defined via the MU number involving colour, charge and spin properties of the preons. We show that all the known fields of the Standard Model (SM) can be constructed using the fermionic preon and 6 preonic scalars, its MUSY partners. As an example, we present well known β-decay process at MUSY level. MUSY also forbids some processes such as proton decay (preserving the baryon number) and hence, it is compatible with current experimental results. In this model the number of SM generations arises to be three naturally.
The MUSY generalization of the SUSY algebra is constructed and the MUSY invariant Lagrangian is also explicitly written. Similar to other preonic and supersymmetric models, a number of new particles are predicted. These particles do not interact with any of the SM fermions but only with the gauge bosons. These particles could be dark matter candidates.
△ Less
Submitted 22 March, 2012; v1 submitted 20 July, 2011;
originally announced July 2011.
-
Model-Independent Searches for New Quarks at the LHC
Authors:
Anupama Atre,
Georges Azuelos,
Marcela Carena,
Tao Han,
Erkcan Ozcan,
José Santiago,
Gokhan Unel
Abstract:
New vector-like quarks can have sizable couplings to first generation quarks without conflicting with current experimental constraints. The coupling with valence quarks and unique kinematics make single production the optimal discovery process. We perform a model-independent analysis of the discovery reach at the Large Hadron Collider for new vector-like quarks considering single production and su…
▽ More
New vector-like quarks can have sizable couplings to first generation quarks without conflicting with current experimental constraints. The coupling with valence quarks and unique kinematics make single production the optimal discovery process. We perform a model-independent analysis of the discovery reach at the Large Hadron Collider for new vector-like quarks considering single production and subsequent decays via electroweak interactions. An early LHC run with 7 TeV center of mass energy and 1 fb-1 of integrated luminosity can probe heavy quark masses up to 1 TeV and can be competitive with the Tevatron reach of 10 fb-1. The LHC with 14 TeV center of mass energy and 100 fb-1 of integrated luminosity can probe heavy quark masses up to 3.7 TeV for order one couplings.
△ Less
Submitted 9 February, 2011;
originally announced February 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
OPUCEM: A Library with Error Checking Mechanism for Computing Oblique Parameters
Authors:
Ozgur Cobanoglu,
Erkcan Ozcan,
Saleh Sultansoy,
Gokhan Unel
Abstract:
After a brief review of the electroweak radiative corrections to gauge-boson self-energies, otherwise known as the direct and oblique corrections, a tool for calculation of the oblique parameters is presented. This tool, named OPUCEM, brings together formulas from multiple physics models and provides an error-checking machinery to improve reliability of numerical results. It also sets a novel exam…
▽ More
After a brief review of the electroweak radiative corrections to gauge-boson self-energies, otherwise known as the direct and oblique corrections, a tool for calculation of the oblique parameters is presented. This tool, named OPUCEM, brings together formulas from multiple physics models and provides an error-checking machinery to improve reliability of numerical results. It also sets a novel example for an "open-formula" concept, which is an attempt to improve the reliability and reproducibility of computations in scientific publications by encouraging the authors to open-source their numerical calculation programs. Finally, we demonstrate the use of OPUCEM in two detailed case studies related to the fourth Standard Model family. The first is a generic fourth family study to find relations between the parameters compatible with the EW precision data and the second is the particular study of the Flavor Democracy predictions for both Dirac and Majorana-type neutrinos.
△ Less
Submitted 25 June, 2010; v1 submitted 16 May, 2010;
originally announced May 2010.