-
Pressure-control of non-ferroelastic ferroelectric domains in ErMnO3
Authors:
O. W. Sandvik,
A. M. Müller,
H. W. Ånes,
M. Zahn,
J. He,
M. Fiebig,
Th. Lottermoser,
T. Rojac,
D. Meier,
J. Schultheiß
Abstract:
Mechanical pressure controls the structural, electric, and magnetic order in solid state systems, allowing to tailor and improve their physical properties. A well-established example is ferroelastic ferroelectrics, where the coupling between pressure and the primary symmetry breaking order parameter enables hysteretic switching of the strain state and ferroelectric domain engineering. Here, we stu…
▽ More
Mechanical pressure controls the structural, electric, and magnetic order in solid state systems, allowing to tailor and improve their physical properties. A well-established example is ferroelastic ferroelectrics, where the coupling between pressure and the primary symmetry breaking order parameter enables hysteretic switching of the strain state and ferroelectric domain engineering. Here, we study the pressure-driven response in a non-ferroelastic ferroelectric, ErMnO3, where the classical stress-strain coupling is absent, and the domain formation is governed by creation-annihilation processes of topological defects. By annealing ErMnO3 polycrystals under variable pressures in the MPa-regime, we transform non-ferroelastic vortex-like domains into stripe-like domains. The width of the stripe-like domains is determined by the applied pressure as we confirm by three-dimensional phase field simulations, showing that pressure leads to highly oriented layer-like periodic domains. Our work demonstrates the possibility to utilize mechanical pressure for domain engineering in non-ferroelastic ferroelectrics, providing a processing-accessible lever to control their dielectric, electromechanical, and piezoelectric response.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al-Mn alloy
Authors:
Håkon W. Ånes,
Antonius T. J. van Helvoort,
Knut Marthinsen
Abstract:
The recrystallized grain size and texture in alloys can be controlled via the microchemistry state during thermomechanical processing. The influence of concurrent precipitation on recovery and recrystallization is here analyzed by directly correlating (sub)grains of P, CubeND or Cube orientation with second-phase particles in a cold-rolled and non-isothermally annealed Al-Mn alloy. The recrystalli…
▽ More
The recrystallized grain size and texture in alloys can be controlled via the microchemistry state during thermomechanical processing. The influence of concurrent precipitation on recovery and recrystallization is here analyzed by directly correlating (sub)grains of P, CubeND or Cube orientation with second-phase particles in a cold-rolled and non-isothermally annealed Al-Mn alloy. The recrystallized state is dominated by coarse elongated grains with a strong P, weaker CubeND and even weaker Cube texture. The correlated data enables orientation dependent quantification of the density and size of dispersoids on sub-boundaries and subgrains in the deformation zones around large constituent particles. A new modified expression for the Smith-Zener drag from dispersoids on sub-boundaries is derived and used. The results show that the drag on (sub)grain boundaries from dispersoids is orientation dependent, with Cube subgrains experiencing the highest drag after recovery and partial recrystallization. The often observed size advantage of Cube subgrains in Al alloys is not realized due to the increased drag, thereby promoting particle-stimulated nucleation (PSN). Relatively fewer and larger dispersoids in deformation zones around large particles give a reduced Smith-Zener drag on PSN nuclei, thus further strengthening the effect of PSN. Observations substantiating the stronger P texture compared to the CubeND texture are a higher frequency of P subgrains and a faster growth of these subgrains. The applied methodology enables a better understanding of the mechanisms behind the orientation dependent nucleation and growth behavior during recovery and recrystallization with strong concurrent precipitation in Al-Mn alloys. In particular, the methodology gives new insights into the strong P and CubeND textures compared to the Cube texture.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Correlated subgrain and particle analysis of a recovered Al-Mn alloy by directly combining EBSD and backscatter electron imaging
Authors:
Håkon Wiik Ånes,
Antonius T. J. van Helvoort,
Knut Marthinsen
Abstract:
Correlated analysis of (sub)grains and particles in alloys is important to understand transformation processes and control material properties. A multimodal data fusion workflow directly combining subgrain data from electron backscatter diffraction (EBSD) and particle data from backscatter electron (BSE) images in the scanning electron microscope is presented. The BSE images provide detection of p…
▽ More
Correlated analysis of (sub)grains and particles in alloys is important to understand transformation processes and control material properties. A multimodal data fusion workflow directly combining subgrain data from electron backscatter diffraction (EBSD) and particle data from backscatter electron (BSE) images in the scanning electron microscope is presented. The BSE images provide detection of particles smaller than the applied step size of EBSD down to 0.03 $μ$m in diameter. The workflow is demonstrated on a cold-rolled and recovered Al-Mn alloy, where constituent particles formed during casting and dispersoids formed during subsequent heating affect recovery and recrystallization upon annealing. The multimodal dataset enables statistical analysis including subgrains surrounding constituent particles and dispersoids' location with respect to subgrain boundaries. Among the subgrains of recrystallization texture, Cube{001}$\left<100\right>$ subgrains experience an increased Smith-Zener drag from dispersoids on their boundaries compared to CubeND{001}$\left<310\right>$ and P{011}$\left<\bar{5}\bar{6}6\right>$ subgrains, with the latter experiencing the lowest drag. Subgrains at constituent particles are observed to have a growth advantage due to a lower dislocation density and higher boundary misorientation angle. The dispersoid size per subgrain boundary length increases as a function of misorientation angle. The workflow should be applicable to other alloy systems where there is a need for analysis correlating grains and grain boundaries with secondary phases smaller than the applied EBSD step size but resolvable by BSE imaging.
△ Less
Submitted 25 July, 2022; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Confinement-driven inverse domain scaling in polycrystalline ErMnO3
Authors:
Jan Schultheiß,
Fei Xue,
Erik Roede,
Håkon W. Ånes,
Frida H. Danmo,
Sverre M. Selbach,
Long-Qing Chen,
Dennis Meier
Abstract:
The research on topological phenomena in ferroelectric materials has revolutionized the way we understand polar order. Intriguing examples are polar skyrmions, vortex/anti-vortex structures and ferroelectric incommensurabilties, which promote emergent physical properties ranging from electric-field-controllable chirality to negative capacitance effects. Here, we study the impact of topologically p…
▽ More
The research on topological phenomena in ferroelectric materials has revolutionized the way we understand polar order. Intriguing examples are polar skyrmions, vortex/anti-vortex structures and ferroelectric incommensurabilties, which promote emergent physical properties ranging from electric-field-controllable chirality to negative capacitance effects. Here, we study the impact of topologically protected vortices on the domain formation in improper ferroelectric ErMnO3 polycrystals, demonstrating inverted domain scaling behavior compared to classical ferroelectrics. We observe that as the grain size increases, smaller domains are formed, which we relate to the interaction of the topological vortices with local strain fields. The inversion of the domain scaling behavior has far-reaching implications, providing fundamentally new opportunities for topology-based domain engineering and the tuning of the electromechanical and dielectric performance of ferroelectrics in general.
△ Less
Submitted 17 April, 2022;
originally announced April 2022.
-
Free, flexible and fast: orientation map** using the multi-core and GPU-accelerated template matching capabilities in the python-based open source 4D-STEM analysis toolbox Pyxem
Authors:
Niels Cautaerts,
Phillip Crout,
Håkon Wiik Ånes,
Eric Prestat,
Jiwon Jeong,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
This work presents the new template matching capabilities implemented in Pyxem, an open source Python library for analyzing four-dimensional scanning transmission electron microscopy (4D-STEM) data. Template matching is a brute force approach for deriving local crystal orientations. It works by comparing a library of simulated diffraction patterns to experimental patterns collected with nano-beam…
▽ More
This work presents the new template matching capabilities implemented in Pyxem, an open source Python library for analyzing four-dimensional scanning transmission electron microscopy (4D-STEM) data. Template matching is a brute force approach for deriving local crystal orientations. It works by comparing a library of simulated diffraction patterns to experimental patterns collected with nano-beam and precession electron diffraction (NBED and PED). This is a computationally demanding task, therefore the implementation combines efficiency and scalability by utilizing multiple CPU cores or a graphical processing unit (GPU). The code is built on top of the scientific python ecosystem, and is designed to support custom and reproducible workflows that combine the image processing, template library generation, indexation and visualisation all in one environment. The tools are agnostic to file size and format, which is significant in light of the increased adoption of pixelated detectors from different manufacturers. This paper details the implementation, validation, and benchmarking results of the method. The method is illustrated by calculating orientation maps of nanocrystalline materials and precipitates embedded in a crystalline matrix. The combination of speed and flexibility opens the door for automated parameter studies and real-time on-line orientation map** inside the TEM.
△ Less
Submitted 14 November, 2021;
originally announced November 2021.
